Mail Deamons for NT Alpha Version 3.03D =========================================== We hope you read this before upgrading - if not, never mind since the SETUP program will have saved your current installation in the BACKUP directory. Please make your own copy by reading the notes below though! There are several things that have changed between versions which are not obvious and could cause you to think that everything has broken... these are noted below. UPGRADING FROM ANY PREVIOUS VERSION =================================== WARNING!!!!! NTMail now prevents mail relay by default, if you wish to allow mail relay through your server you must specifically enable it by selecting "Relay enabled - use with caution" from the Mail Relay tab of the Juce GUI. NTMail uses IP addressing for the default anti-relay option and will attempt to recognise your local Class C IP address group on installation, if you want to amend this group you may do so from the Mail Relay tab of the Juce GUI using the IP Address options described in the Juce help file. UPGRADING FROM VERSION 3.02 =========================== Changes ------- + WWW Server added. + List server has "multi-send" capability (create the value InternetShopper/Mail/Parameters/ListMultiSend:REG_DWORD:0x1 + Anti-Spamming measures added. + IMAP4 Server. UPGRADING FROM VERSION 3.01 =========================== Changes ------- + Supports multiple domains. + Numberous other enhancements that can be seen on the page: http://www.ntmail.co.uk/versions.htm + APOP now supported. By default APOP support is off so that you do not need to re-enter user passwords. If you are using the NT User Database, you will never be able to use APOP. If you are using the registry, once people change their password, APOP may be enabled (this is done via a registry entry: AllowAPOPLogon - see NTMail Reference Manual). UPGRADING FROM VERSION 3.00 =========================== Changes ------- + We have removed the "mailshow" command from version 3.01. Instead of the mailshow command we suggest that you use PERFMON instead. Since full support for MAILSHOW has been removed, it will no longer display the correct values. UPGRADING FROM VERSION 2.10 =========================== Changes ------- When you upgrade from version 2.10, you will find that files and registry entries have all been changed. The new setup for version 3.01 is given in the User Guide. In addition you should note: + That the way NTMail recognises the local domain name has changed. In version 2.10, defining your domain name as "company.com" would mean that mail to "abc.company.com" would be accepted as local. In version 3.0 this is no longer true. In version 3.0 you will need to make your domain name "company.com" AND add your additional local domain name as "*.company.com" in the Control Panel. (In the registry, the value /InternetShopper/Mail/Parameters/LocalDomainNames will become "company.com *.company.com"). + The name of the POP service has been changed from "POPD" to "POP". This means that your can enter "NET STOP POP" rather than "NET STOP POPD" and is now consistent with the other NTMail services. If you get an error "Could not start POP server" you are probably running the wrong version of the MAIL program. The upgrade 2.10 -> 3.01 ------------------------ Please follow these instructions... the upgrade to version 3.01 is very complex and by saving the current status you can always return should something unexpected happen. To upgrade from a previous version of NTMail, you will need to: Take a backup of the registry using REGEDT32. Start REGEDT32 up (type START REGEDT32) Select HKEY_LOCAL_MACHINE/Software/InternetShopper Highlight the entry called "Mail" by a single click on it. Select the command "Save Key" from the "Registry" menu and save the values to a backup file. We suggest you use the extension .key so you can find it later if need be. Enter the command NET STOP POPD (ignore the errors) At this point you have a choice - Manual or GUI. For the GUI update, simply type SETUP (it will save the current executables for you). For a manual update: Enter "mail -stop" Move the old executalbes to POP.OLD, POST.OLD and SMTP.OLD. Copy the three new executables (POP, POST and SMTP) to the same directory as the previous executables. Enter "POP -u" and "POP -i" to change the name of the POP server and update the registry. Enter "POST -i" Enter "SMTP -i" Enter "mail -start" If you have upgraded from version 2.10, you will find a residual number of .mbx files in the NTMail base directory. Once you are sure that the installation has gone well and all services are working as you would expect, delete these old mail boxes. DO NOT delete the mail boxes in the In and Out directory (otherwise you will have some very upset/confused people)! Reverting to previous version ============================= If the installation fails, type "MAIL -y". This will create a SETUP.TXT file which you should send to Internet Shopper. You will find a list of all changes carried out by the SETUP program in the file "INSTALL.LOG" in the BACKUP directory. To recover your system, goto the Registry Editor and, after selecting the key "Mail", select "Restore" from the "Registry" menu. Select your key backup file. Stop the services, copy the old executables on top of the new ones and restart the services. You will then have recovered your mail system. Please email ntmail-support@net-shopper.co.uk with details of the problem that you encountered. If you did not save the registry key and all else has failed, you may still be able to recover the situtation. Stop the mail services and copy the old executables from the BACKUP directory onto the new ones. Copy the SETUP.TXT file from the BACKUP directory to a temporary directory and the NEW MAIL.EXE to the same temporary directory. Do NOT use the NTMail base directory or the BACKUP directory. Next type: MAIL -yr The program will delete the current Mail entry in the registry and replace them with the details from the setup file that was saved by the setup program. This is a last resort and you should check the registry afterwards to make sure that things look OK. Restart the services and email support. DOCUMENTATION ============= The documentation set has NOT been included with these files. You will need to obtain one of: INML-A4.ZIP (Formated for A4 printer) or INML-LT.ZIP (Formated for Letter printers) These contain four Word 6 documents that may be printed as many times as you like. If you do not have Word 6, please download "Wordview". This will allow you to look at the documents (but not edit them). If you would like a printed (and bound) version, these are available from Internet Shopper Ltd. WARRANTY ======== This Program is provided "as is". Internet Shopper Ltd. (ISL) warrants that the Program will substantially comply with the specifications set out in the documentation. Except as stated herein this Program is provided, without warranty of any kind, express or implied, statutory or otherwise, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the Program is with you. Should the Program prove defective, you assume the entire cost of all necessary servicing, repair or correction. ISL does not warrant that the functions contained in the Program will meet your requirements or that the operation of the Program will be uninterrupted or error-free. ISLīS SOLE LIABILITY TO YOU FOR ANY CLAIM, DEMAND OR CAUSE OR ACTION WHATSOEVER, AND REGARDLESS OF FORM OF ACTION, WHETHER IN CONTRACT OR TORT, INCLUDING NEGLIGENCE, SHALL BE LIMITED, AT ISLīS SOLE OPTION, TO REPLACEMENT OF THE PROGRAM OR REFUND OF THE PURCHASE PRICE. IN NO EVENT SHALL ISL BE LIABLE FOR OR YOU HAVE A REMEDY FOR RECOVERY OF ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF ISL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOST SAVINGS, LOST REVENUES OR ECONOMIC LOSS OF ANY KIND, OR FOR ANY CLAIM BY ANY THIRD PARTY. All trademarks are acknowledged as the property of their respective owners. If you have any problems with this program, please direct your comments to one of the authors at "ntmail-support@net-shopper.co.uk", or at PO Box 79 Clevedon, BS21 7EF, UK. Please grant us the opportunity of defending the program's design and functionality before decrying its use in any forum, public or private. The success of future shareware depends on your encouragement. SUPPORT ======= We strongly recommend that you join the NTMAIL-UPDATE mail list so that you receive details of updates to this software. To join this list, send an email message to list@net-shopper.co.uk with the body "join ntmail-update" and you will receive conformation of being added. In addition you may like to join the discussion forum for NTMail and NTList by sending a message to list@net-shopper.co.uk with the body "join ntmail-discuss" or "digest ntmail-discuss". You will receive conformation that you have been added. If you have any problems with this product, please check out the WWW pages at http://www.ntmail.co.uk/ If there is still no resolution to your problem, please contact: ntmail-support@net-shopper.co.uk. For sales, please email sales@net-shopper.co.uk 11-March-1998