GLIB

NAME

SYNOPSIS

DESCRIPTION

The librarian part of the program manipulates 1 synth bank of voices (which can be uploaded to or downloaded from the synth), and 3 banks of library voices (which can be read/written to disk). When you exit the librarian and select a different synth, the contents of the library banks and other settings (e.g. midi channel) for each are retained.

From the librarian screen you can descend to the patch editor screen to change or create an individual patch for a given synthesizer. Details about using the librarian and the patch editor are given below.

The glib distribution includes support files for various PCs -- IBM, Atari ST, Macintosh, Amiga. And you can run glib on Unix (it uses curses), although obviously most Unix machines don't have midi I/O. Trying it out on Unix will give you a feel for what the program does, so you can decide whether or not it's worth the trouble to port it to your midi-capable PC. Or your could edit patch files on a Unix system and download them to a PC.

The current version of glib, version 1.6, supports the synthesizers: DX100, TX81, DEP5, DW8000, Roland D-10, Kawaii K1 K5, DX7, and Casio CZ1.  

Using glib - Moving around

Using glib - The librarian

b -

Cycle through the (3) library banks, displayed on the right side of the screen.

c -

Set the midi channel for sending/receiving voices.

d -

Download from the (real) synthesizer, replacing the current contents of the synth bank.

D -

Download from a file, replacing the current contents of the synth bank. Same as above, except input comes from file instead of the synth. (Implemented only for Unix version.)

e -

Edit the current voice (see editor description below).

f -

List the files on the disk.

p -

Put the yank buffer, replacing the contents of the current voice.

q -

Quit, going back to ``choose a synth''.

r -

Read a bank of voices from a file, replacing entirely the current library bank.

R -

Read a bank of voices from a text file (created with the W command).

s -

Swap the current voice with the yank buffer. 2 swaps is a no-op.

t -

Transfer all voices, either from the current library bank to the synth bank, or vice versa.

u -

Upload the current contents of the synth bank to the synth. You are given a choice of sending the entire bank or just the current voice.

U -

Upload the current contents of the synth bank to a file. Same as above, except output goes to file instead of the synth. (Implemented only for Unix version.)

w -

Write the current library bank to a file.

W -

Write the current library bank to an editable text file. This is slow, and is meant for use in some special circumstance - for instance if you changed the binary format of files, you might want to convert your old patches.

y -

Yank the current voice into the yank buffer, shown in the middle of the screen.

Using glib - The editor

K -

increase value by 1

J -

decrease value by 1

I -

increase value by 4

M -

decrease value by 4

< -

decrease value to its minimum

> -

increase value to its maximum

S -

assign same value as last assigned

These keys are defined in glib.h, and should be changed to suit your own tastes. I'm not thrilled with these choices, myself, but I had to use something, and at least the hand may stay in one place.

To change the name of a voice, use ``N''.

The ``auto-note'' is played whenever you press the space bar. This is a convenient way of playing a note as soon as you make a change (ie. you can do everything from the computer keyboard). You can change the auto-note parameters (pitch, duration, volume, channel) the same way as all the other parameters.  

Synthesizers

DX100

Sample patches: fact1.dx1

TX81

Sample patches: fact1.t8p fact1.tx8

DEP5

Sample patches: fact1.dp5

DW8000

Sample patches: fact1.dw8

Roland D-10

Sample patches: d10fact.pat d10fact.rsu d10fact.tim d10fact.ton d10fact.tra d10fact.urp

Kawaii K1

Sample patches: k1fact.mlt k1fact.sgl

Voices are not sent to the K1's edit buffer.
For Kawai K1 multi patches, names of single patches referred to are displayed when they can be found in the synth voice bank of the single patches module. The names are updated whenever a new bank of voices is transferred into this bank.

Kawaii K5

Sample patches: card1.k5m card1.k5s

Editing of voices is not implemented.

DX7

Sample patches: n001.dx7 rom1.d7s

Some of the parameters on the DX7s editing screen are ``multiplexed''. Move the cursor to the ``Modulation Wheel'' legend, then ``increment'' and ``decrement'' this field: the fields below it will cycle through the ``Modulation Wheel'', ``Aftertouch'', ``Breath Control'', ``Foot Control'', and ``MIDI Control'' parameters.

Casio CZ1

Sample patches: bank1.cz1

The performance parameters given on the lower part of the editing screen, Glib, Portamento, etc., are just there pro forma. In the current version, setting them doesn't accomplish anything.

AUTHORS

original version for dx100, tx81z, dep5: Tim Thompson,

Macintosh and dw1000 support: Steve Falco.

d10 support: Michael Kesti, mrk@gvgspd.GVG.TEK.COM

Amiga and k5 support: Alan Bland, mab@druwy.ATT.COM or att!druwy!mab

K1 support and menu mods: Greg Lee, lee@uhccux.uhcc.hawaii.edu

DX7 support: Scott Snyder, ssnyder@citjulie.bitnet, ssnyder@juliet.caltech.edu (addresses valid until mid-June)

CZ1 support: Mark R. Rinfret, mrr@amanpt1.Newport.RI.US,

arp file requester, Amiga version: Dave Weiler

Some of the code was originally written by Steve Frysinger (moss!spf), John Helton, and James Gosling.

Index

NAME

SYNOPSIS

DESCRIPTION

Using glib - Moving around

Using glib - The librarian

Using glib - The editor

Synthesizers

AUTHORS