--------------------------------------- Shadow Warrior Sprite Tagging Reference Compiled And Edited By Keith Schuler (c) 1997 3D Realms Entertainment --------------------------------------- This document is your reference guide to using the special sprites in Shadow Warrior, including ST1, tracks, locks, switches, cracks, and so on. Examples of almost all uses of these sprites are given in EXAMPLE.MAP, so be sure to check that map out. You'll find it in the \GOODIES\TOOLS directory of your Shadow Warrior CD. Refer to these documents in the \GOODIES\DOC directory on your Shadow Warrior CD for other important information: ADVANCED.TXT - Brief explanations of room-over-room, sector objects, and other advanced Shadow Warrior mapping topics. EDITART.TXT - Instructions and reference for using the EDITART program. EXAMPLE.TXT - Documentation to accompany EXAMPLE.MAP, which includes demonstrations of almost all of Shadow Warrior's map functionality. SLABSPRI.TXT - Instructions and reference for using the SLABSPRI program. SWSOUNDS.TXT - An index of the sound effects and ambient sounds. SPRITAGS.TXT - Sprite tagging reference. Your guide to all the special sprites in Shadow Warrior and how to use them. SWBUILD.TXT - A tutorial and reference guide to using the BUILD editor. WALLTAGS.TXT - Wall and sector tagging reference. These are all the wall and sector tags used in Shadow Warrior. ----------------------------------------------------------------------------- -------- Contents -------- The Shadow Warrior Sector Effector 1 Meet the ST1 sprite 1.1 Using the ST1 1.1.1 ST1 functions 1.1.2 ST1 context sensitive help 1.1.3 The Shadow Warrior BUILD Tags 1.2 The 15 standard tags 1.2.1 The 11 Boolean Flags 1.2.2 TAG1 (Hitag) 1.2.3 TAG2 (Lotag) and match tags 1.2.4 TAG4 1.2.5 BOOL1 1.2.6 BOOL11 1.2.7 Other Notes Regarding The ST1 1.3 Z-height 1.3.1 Color Coding Your ST1s 1.3.2 Brighten Your ST1s 1.3.3 The Shadow Warrior ST1 Function Reference 1.4 0. SECT_SINK 1. SECT_OPERATIONAL 3. SECT_CURRENT 5. SECT_NO_RIDE 7. SECT_DIVE_AREA 8. SECT_UNDERWATER 9. SECT_UNDERWATER2 16. SO_ANGLE 19. SECT_FLOOR_PAN 21. SECT_CEILING_PAN 23. WALL_PAN_SPEED 29. SECT_LOCK_DOOR 30. SPRI_CLIMB_MARKER 31. SECT_SO_SPRITE_OBJ 32. SECT_SO_DONT_BOB 33. SECT_SO_SINK_DEST 34. SECT_SO_DONT_SINK 37. SECT_SO_FORM_WHIRLPOOL 38. SECT_ACTOR_BLOCK 42. MULTI_PLAYER_START 43. FIREBALL_TRAP 44. BOLT_TRAP 45. SECT_SO_DONT_ROTATE 46. PARALLAX_LEVEL 47. SECT_DONT_COPY_PALETTE 48. MULTI_COOPERATIVE_START 49. SO_SET_SPEED 50. SO_SPIN 51. SO_SPIN_REVERSE 52. SO_BOB_START 53. SO_BOB_SPEED 55. SO_TURN_SPEED 56. LAVA_ERUPT 57. SECT_EXPLODING_CEIL_FLOOR 58. SECT_COPY_DEST 59. SECT_COPY_SOURCE 62. SHOOT_POINT 63. SPEAR_TRAP 64. SO_SYNC1 65. SO_SYNC2 66. DEMO_CAMERA 68. SO_LIMIT_TURN 69. SPAWN_SPOT 70. SO_MATCH_EVENT 71. SO_SLOPE_FLOOR_TO_POINT 72. SO_SLOPE_CEILING_TO_POINT 73. SO_TORNADO 75. SO_AMOEBA 76. SO_MAX_DAMAGE 77. SO_RAM_DAMAGE 80. SO_KILLABLE 81. SO_AUTO_TURRET 82. SECT_DAMAGE 84. WARP_TELEPORTER 85. WARP_CEILING_PLANE 86. WARP_FLOOR_PLANE 87. WARP_COPY_SPRITE1 88. WARP_COPY_SPRITE2 90. PLAX_GLOB_Z_ADJUST 92. SECT_VATOR 97. CEILING_Z_ADJUST 98. FLOOR_Z_ADJUST 99. FLOOR_SLOPE_DONT_DRAW 100. SO_SCALE_INFO 101. SO_SCALE_POINT_INFO 102. SO_SCALE_XY_MULTIPLY 103. SECT_WALL_MOVE 104. SECT_WALL_MOVE_CANSEE 106. SECT_SPIKE 108. LIGHTING 109. LIGHTING_DIFFUSE 110. VIEW_LEVEL1 111. VIEW_LEVEL2 120. VIEW_THRU_CEILING 121. VIEW_THRU_FLOOR 132. BREAKABLE 132. BREAKABLE_SPRITE 133. QUAKE_SPOT 134. SOUND_SPOT 135. SLIDE_SECTOR 136. CEILING_FLOOR_PIC_OVERRIDE 140. TRIGGER_SECTOR 141. DELETE_SPRITE 143. SECT_ROTATOR 144. SECT_ROTATOR_PIVOT 145. SECT_SLIDOR 146. SECT_CHANGOR 147. SO_DRIVABLE_ATTRIB 148. WALL_DONT_STICK 149. SPAWN_ITEMS 150. STOP_SPOUND_SPOT 202. BOUND_FLOOR_BASE_OFFSET 203. BOUND_FLOOR_OFFSET 500-596: SECT_SO_BOUNDING 1000. MIRROR_CAM 1002. AMBIENT_SOUND 1005. ECHO_SPOT 1006. DRIP_GENERATOR The Shadow Warrior Track Sprite 2 Meet the Track sprites 2.1 Building a track 2.2 Tagging a track sprite 2.3 Lotag 2.3.1 Hitag 2.3.2 Using a track 2.4 Sector and sprite objects 2.4.1 Actors 2.4.2 Tracktag function reference 2.5 700. TRACK_START 701. TRACK_END 702. TRACK_SET_SPEED 703. TRACK_STOP 704. TRACK_REVERSE 705. TRACK_SPEED_UP 706. TRACK_SLOW_DOWN 707. TRACK_VEL_RATE 709. TRACK_ZUP 710. TRACK_ZDOWN 711. TRACK_ZRATE 712. TRACK_ZDIFF_MODE 715. TRACK_SPIN 716. TRACK_SPIN_STOP 717. TRACK_BOB_START 718. TRACK_BOB_SPEED 719. TRACK_BOB_STOP 720. TRACK_SPIN_REVERSE 723. TRACK_SO_SINK 724. TRACK_SO_FORM_WHIRLPOOL 725. TRACK_MOVE_VERTICAL 726. TRACK_WAIT_FOR_EVENT 728. TRACK_MATCH_EVERYTHING 729. TRACK_MATCH_EVERYTHING_ONCE 751. TRACK_ACTOR_STOP 752. TRACK_ACTOR_REVERSE 753. TRACK_ACTOR_SPEED_UP 754. TRACK_ACTOR_SLOW_DOWN 755. TRACK_ACTOR_VEL_RATE 771. TRACK_ACTOR_JUMP 772. TRACK_ACTOR_CRAWL 780. TRACK_ACTOR_CLOSE_ATTACK1 782. TRACK_ACTOR_ATTACK1 791. TRACK_ACTOR_OPERATE 792. TRACK_ACTOR_CLIMB_LADDER 799. TRACK_ACTOR_WAIT_FOR_PLAYER Other Important Sprites 3 Actors 3.1 Hornets (picnum 800) 3.1.1 Bouncing Betty (picnum 817) 3.1.2 Accursed Head (picnum 820) 3.1.3 Sumo Boss (picnum 1210) 3.1.4 Serpent Boss (picnum 1300) 3.1.5 Coolie (picnum 1400) 3.1.6 Coolie Ghost (picnum 1441) 3.1.7 Green Guardian (picnum 1469) 3.1.8 Little Ripper (picnum 1580) 3.1.9 Fish (picnum 3780) 3.1.10 Evil Ninja (picnum 4096) 3.1.11 Crouching Evil Ninja (picnum 4162) 3.1.12 Big Ripper (picnum 4320) 3.1.13 Bunny (picnum 4550) 3.1.14 Female Warrior (picnum 5162) 3.1.15 Zilla Boss (picnum 5426) 3.1.16 Leaders And Followers 3.1.17 Spawning Actors With A Trigger 3.1.18 Cracks (TAG_SPRITE_HIT_MATCH) 3.2 257. TAG_SPRITE_HIT_MATCH Switches: (picnums 551-584) 3.3 206. TAG_SPRITE_SWITCH_VATOR 210. TAG_LIGHT_SWITCH 211. TAG_SWITCH_EVERYTHING 212. TAG_SWITCH_EVERYTHING_ONCE 213. TAG_COMBO_SWITCH_EVERYTHING 214. TAG_COMBO_SWITCH_EVERYTHING_ONCE 216. TAG_SPAWN_ACTOR_SWITCH 304. TAG_ROTATE_SO_SWITCH Shootable switch (picnum 577) 3.3.1 Exit switch (picnum 2470) 3.3.2 Keys And Keyholes 3.4 Keys (picnums 1765-1779) 3.4.1 Keyholes (picnums 1846, 1850, and 1852) 3.4.2 TV Monitors: (picnums 3830-3837) 3.5 QuickJump And QuickJumpDown 3.6 QuickJump (picnum 2309) 3.6.1 QuickJumpDown (picnum 2310) 3.6.2 Gratings 3.7 DeathFlag(tm) Capture the Flag 3.8 The Flag Sprite (picnum 2520) 3.8.1 ----------------------------------------------------------------------------- ------------------------------------------ 1. The Shadow Warrior Sector Effector ------------------------------------------ 1.1 Meet the ST1 sprite: Shadow Warrior has one sector effector, the ST1 sprite. Using it, you will be able to create all of the different special effects in the game. This is how you make working doors, dynamic slopes, explosions, moving sectors, room over room, water, and everything else. For this reason, it is by far the most commonly used sprite in Shadow Warrior. 1.1.1 Using the ST1 An ST1 is a sprite just like any other. You can find it in the tile set (the "V" menu in BUILD) at position 2307. The most common way to use an ST1 is to place it in the sector you wish to be affected. For example, if you want a sector to be a door, you would place the ST1 in that sector, tag it properly, and then that sector would behave like a door. 1.1.2 ST1 functions There are almost 100 different functions an ST1 can perform. When you you first place an ST1 sprite, its sign in 2D mode will probably read "SECT_SINK." This indicates the ST1's hitag is 0, which designates the SECT_SINK function. By changing the hitag (Alt H in 2D mode, or ' H in 3D mode) of the sprite, you change the function it will perform, and its sign will change to reflect that. All of the different ST1 functions are listed below. 1.1.3 ST1 context sensitive help If, in 2D mode, you point at an ST1 and press F6, context sensitive help will be listed at the bottom of the screen. The information provided will be based on the hitag of the ST1. If, for instance, the ST1's hitag is 92, then F6 will give you help regarding vators. Most of this help will be the same material you find in this document. 1.2 The Shadow Warrior BUILD Tags: The Shadow Warrior tagging system was developed by a team which was not in contact with the Duke Nukem 3D team, so if you are familiar with Duke Nukem 3D mapping, then forget everything you know, because it can only confuse you here. Shadow Warrior's tagging system is very powerful, and with this power comes complexity. Stick with it, though, and you'll soon be proficient enough to set up a shootable light or a locked door without even looking at this reference. 1.2.1 The 15 standard tags Every sprite in Shadow Warrior makes use of 15 different TAGS. A tag is merely a variable that contains information regarding the sprite. To enter a value for a tag, point to the sprite, then press the QUOTE key plus the number of the tag. To access TAG11 through TAG15, press SHIFT+QUOTE+the number of the tag. Note that TAG1 and TAG2 are the hitag and lotag, respectively, and so can also be altered with the Alt-H and the Alt-T keys. The following is a list of the 15 tags, their function, and the range of values they can hold. TAG1 = hitag (-32768 to 32767) TAG2 = lotag (-32768 to 32767) TAG3 = clipdist (-128 to 127) - default value is 32 TAG4 = ang (-32768 to 32767) TAG5 = xvel (-32768 to 32767) TAG6 = yvel (-32768 to 32767) TAG7 = zvel 1 (-128 to 127) TAG8 = zvel 2 (-128 to 127) TAG9 = owner 1 (-128 to 127) - default is unsigned 255 or signed -1 TAG10 = owner 2 (-128 to 127) - default is unsigned 255 or signed -1 TAG11 = shade (-128 to 127) TAG12 = pal (-128 to 127) TAG13 = xoffset and yoffset (-32768 to 32767) TAG14 = xrepeat and yrepeat (-32768 to 32767) TAG15 = z (-32768 to 32767) 1.2.2 The 11 Boolean Flags A boolean flag can hold only two possible values: 0 or 1. Every sprite in Shadow Warrior makes use of 11 boolean flags. To enter a value for a boolean flag, press the SEMICOLON key plus the number of the tag. To enter a value for BOOL11, press SHIFT, plus SEMICOLON, plus the "1" key. 1.2.3 TAG1 (Hitag) An ST1 sprite always uses TAG1 (the hitag) to specify which function the sprite is to perform on the sector. 1.2.4 TAG2 (Lotag) and match tags An ST1 sprite often uses TAG2 (the lotag) to specify a so-called "match" tag. This means that the value in TAG2 is a unique and arbitrary value designated by you, the level designer. This unique value is used to match the ST1's function to a trigger. A trigger can be caused by such events as operating a switch or stepping into a trigger sector. BUILD will report the next available match tag when you press F5 in 2D mode. 1.2.5 TAG4 TAG4, as you can see from the list above, is a sprite's angle. By changing the TAG4 value of a sprite, you also change the angle it's facing. Be very cautious of this, because a great many ST1 functions rely on having an exact value in TAG4. If you use the ">" or "<" keys on that sprite, the value will shift by 128, which is probably a large enough change that the ST1 will no longer behave as you'd expect it to. In the case of ST1 134 (SOUND_SPOT), the game will probably quit to DOS with an error. Another pitfall to beware is rotating Right-Alt selected groups of sectors. Since all of the sprites within the selected group are rotated with the sectors when you do this, their TAG4 values will often become grossly incorrect. 1.2.6 BOOL1 If the BOOL1 flag is set to 1 on any sprite, BUILD will cause that individual sprite to behave as though it were an ST1 sprite. This is generally only used to create breakable sprites. 1.2.7 BOOL11 BOOL11 is a flag used by all sprites in the game, not just ST1s. If the BOOL11 flag on any sprite is set to 1, then that sprite will remain stationary rather than ride up and down on a vator. 1.3 Other Notes Regarding The ST1 1.3.1 Z-height Many functions are affected by the height of the ST1 sprite. For instance, a door might open to the height of the sprite, or a teleporter might move the player to the same height as the sprite. When calculating a height, always use the lowest point of the sprite graphic as the reference, no matter which way the sprite is oriented. A sprite that is placed on the floor by means of Ctrl-PgDn is at the exact same z-coordinate as the floor, no matter how far the graphic sticks up. A sprite that is placed against the ceiling using Ctrl-PgUp, however, does not have the same z-height as the ceiling because the top of the graphic is resting against the ceiling, and not the bottom. You'll find that you will occasionally need to sink an ST1 into the floor or into the ceiling to get a desired effect. 1.3.2 Color Coding Your ST1s The only ST1 functions affected by the sprite's palette value are LIGHTING (hitag 108) and LIGHTING_DIFFUSE (hitag 109). Since in most cases the ST1 isn't affected by palette, you may find it useful to assign different palette values to certain ST1 functions, so as to more readily identify them in 3D mode. For instance, I sometimes like to color SPAWN_SPOTs green (palette 11) and TAG_SPRITE_HIT_MATCHes red (palette 14.) Make a habit of color coding your ST1 sprites, and you won't regret it. 1.3.3 Brighten Your ST1s No ST1 function is affected by the shade value of the sprite, so why not make them really bright? This will make them easier to spot in 3D editing mode. 1.4 The Shadow Warrior ST1 Function Reference: Hitag 0: SECT_SINK TAG2 = depth Place this in water, lava, or any sector with a floor surface you want Lo Wang to sink into. He will sink to the depth specified in TAG2. When building dive sectors (see Hitag 7: SECT_DIVE_AREA) TAG2 needs to be at least 35. You probably never want to use a value greater than 40, or the player's view may become distorted. NOTE: If used with a lava texture, SECT_SINK will cause Lo Wang to take damage when stepping in the sector. EXAMPLES: AA and BB in EXAMPLE.MAP SEE ALSO: PLAX_GLOB_Z_ADJUST (hitag 90), CEILING_Z_ADJUST (hitag 97), FLOOR_Z_ADJUST (hitag 98) Hitag 1: SECT_OPERATIONAL Place this in a sector of a driveable sector object. This will be the sector the player must stand in and press SPACE to operate the driveable. EXAMPLES: EE and EF in EXAMPLE.MAP Hitag 3: SECT_CURRENT TAG2 = speed TAG4 = ang If SECT_CURRENT is used in a sector along with either a SECT_SINK (Hitag 0), a SECT_UNDERWATER (Hitag 8), or a SECT_UNDERWATER2 (Hitag 9), the player will be moved in the direction the SECT_CURRENT is facing, at the speed designated in TAG2. EXAMPLES: AA and BB in EXAMPLE.MAP SEE ALSO: SECT_SINK (hitag 0), SECT_UNDERWATER (hitag 8), SECT_FLOOR_PAN (hitag 19) Hitag 5: SECT_NO_RIDE Use SECT_NO_RIDE in any sector of a moving sector object to keep the player from moving with that sector. EXAMPLES: EC, FC and FD in EXAMPLE.MAP Hitag 7: SECT_DIVE_AREA TAG2 = match (non zero) Diving area - pressing the CROUCH key when here will teleport the player to an UNDERWATER (Hitag 8) area with a matching UNIQUE match tag. You must also have a SECT_SINK (Hitag 0) sprite in the same sector with a TAG2 of at least 35 for this to work. EXAMPLES: BA in EXAMPLE.MAP SEE ALSO: SECT_SINK (hitag 0), SECT_UNDERWATER (hitag 8) Hitag 8: SECT_UNDERWATER TAG2 = match Underwater area - floating to the ceiling of this area will teleport the player to the DIVE_AREA (hitag 7) with a matching UNIQUE non zero match tag. IMPORTANT: The over- and underwater sectors need to have congruent shapes, and the SECT_DIVE_AREA sprite and the SECT_UNDERWATER sprite need to be in the same relative position for both of their respective sectors. IMPORTANT: A zero in TAG2 denotes that this is a swim area with no matching SECT_DIVE_AREA. This can be used for areas where the player cannot surface. EXAMPLES: BA in EXAMPLE.MAP SEE ALSO: SECT_DIVE_AREA (hitag 7), SECT_UNDERWATER2 (hitag 9) Hitag 9: SECT_UNDERWATER2 TAG2 = match TAG3 = type 0/32 = surface here 1 = can't surface here Secondary Underwater area - floating to the surface of this area will teleport you to the SECT_DIVE_AREA (hitag 7) with a matching unique match tag. SECT_UNDERWATER2 allows you to split an underwater area into multiple sectors, while still having a single large DIVE_AREA sector. EXAMPLES: BA in EXAMPLE.MAP SEE ALSO: SECT_DIVE_AREA (hitag 7), SECT_UNDERWATER (hitag 8) Hitag 16: SO_ANGLE TAG4 = Angle of Sector Object Place this anywhere in a sector object to tell Shadow Warrior which end is the front. This will affect the orientation of a sector object as it follows a track or is operated by the player. EXAMPLES: EE, EF, and FA in EXAMPLE.MAP Hitag 19: SECT_FLOOR_PAN TAG2 = speed - 0 to 16386 TAG4 = ang BOOL1 = Move with speed of sector object This causes the floor of the sector it's in to pan in the direction indicated by TAG4 at the rate indicated by TAG2. Set BOOL1 to "1" if the sector is part of a sector object and you want the floor to pan at the same speed the sector object is moving. The BOOL1 feature is primarily used to simulate moving tank treads on driveable sector objects. EXAMPLES: BB in EXAMPLE.MAP SEE ALSO: SECT_CEILING_PAN (hitag 21), WALL_PAN_SPEED (hitag 23) Hitag 21: SECT_CEILING_PAN TAG2 = speed - 0 to 16386 TAG4 = ang BOOL1 = Move with speed of sector object This causes the ceiling of the sector it's in to pan in the direction indicated by TAG4 at the rate indicated by TAG2. Set BOOL1 to "1" if the sector is part of a sector object and you want the ceiling to pan at the same speed the sector object is moving. EXAMPLES: BB in EXAMPLE.MAP SEE ALSO: SECT_FLOOR_PAN (hitag 19), WALL_PAN_SPEED (hitag 23) Hitag 23: WALL_PAN_SPEED TAG2 = speed - 0 to 16386 TAG4 = point sprite at desired wall TAG6 = angle of panning BOOL1 = Move with speed of sector object Point the sprite at the wall you want it to affect. That wall's texture will pan in the direction indicated by TAG6 at the rate indicated by TAG2. Set BOOL1 to "1" if the wall is part of a sector object and you want the wall texture to pan at the same speed the sector object is moving. This feature is usually used to simulate tank treads on driveable sector objects. EXAMPLES: BB in EXAMPLE.MAP SEE ALSO: SECT_CEILING_PAN (hitag 21), SECT_FLOOR_PAN (hitag 19) Hitag 29: SECT_LOCK_DOOR TAG2 = type 1 = RED KEYCARD 2 = BLUE KEYCARD 3 = GREEN KEYCARD 4 = YELLOW KEYCARD 5 = GOLD MASTER KEY 6 = SILVER MASTER KEY 7 = BRONZE MASTER KEY 8 = RED MASTER KEY Lock the door. Must have the correct key to open it. Works for rotating, sliding, and all vator uses including switches. Place it in the same sector with a SECT_VATOR (hitag 92), SECT_ROTATOR (hitag 143), or SECT_SLIDOR (hitag 145). EXAMPLES: EB in EXAMPLE.MAP Hitag 30: SPRI_CLIMB_MARKER TAG4 = angle Center this sprite on the ladder and set the angle pointing out away from the wall. The position of the sprite is important, because that is the (x,y) location the player sprite will be in while climbing the ladder. Used in conjunction with TAG_WALL_CLIMB (walltag 305). EXAMPLES: BC and DF in EXAMPLE.MAP Hitag 31: SECT_SO_SPRITE_OBJ Place this ST1 anywhere in a sector object. Makes a sector object become a "sprite object." The sprites will move but the sectors will not. Sprite objects can cross sector boundries, whereas regular sector objects cannot. EXAMPLES: EC in EXAMPLE.MAP Hitag 32: SECT_SO_DONT_BOB Mark a sector in a bobbing sector object so it will not bob with the rest of the sector. Look at the boat in $WHIRL.MAP for an example. SEE ALSO: SO_BOB_START (hitag 52), SO_BOB_SPEED (hitag 53) Hitag 33: SECT_SO_SINK_DEST TAG2 = offset Mark a sector in a sector object as the destination for sinking. It will not sink with other sectors. TAG2 is the offset from the sector's current floor height to use as the sinking destination. Look at the boat in $WHIRL.MAP for an example. SEE ALSO: SECT_SO_DONT_SINK (hitag 34) Hitag 34: SECT_SO_DONT_SINK Mark a sector in a sector object so it will not sink with other sectors. Look at the boat in $WHIRL.MAP for an example. SEE ALSO: SECT_SO_SINK_DEST (hitag 33) Hitag 37: SECT_SO_FORM_WHIRLPOOL TAG2 = depth Lower the whirlpool sectors to a 'depth' level, when the appropriate track sprite is reached by the sector object. (TRACK_SO_FORM_WHIRLPOOL, tracktag 724) Look at the boat in $WHIRL.MAP for an example. Hitag 38: SECT_ACTOR_BLOCK Mark a sector to keep enemy actors from entering, but the player can still enter. Both enemies and the player can still fire weapons through the sector. EXAMPLES: BC in EXAMPLE.MAP Hitag 42: MULTI_PLAYER_START TAG2 = (0 to 7) player number TAG4 = angle to start facing These mark the positions where players will spawn in WangBang games. The players' feet will be placed at the same height as the bottom of the ST1 sprite, so place them on the floor unless you want the player to fall. Always be sure to include start point #0. EXAMPLES: Any game map SEE ALSO: MULTI_COOPERATIVE_START (hitag 48) Hitag 43: FIREBALL_TRAP TAG2 = match TAG4 = angle Shoots a fireball from the location of this sprite in the direction the angle is pointing when a sector tagged TAG_TRIGGER_MISSILE_TRAP (sector tag 43) is stepped on. EXAMPLES: BD in EXAMPLE.MAP SEE ALSO: BOLT_TRAP (hitag 44), SPEAR_TRAP (hitag 63) Hitag 44: BOLT_TRAP TAG2 = match TAG4 = angle Shoots a rocket from the location of this sprite in the direction the angle is pointing when a sector tagged TAG_TRIGGER_MISSILE_TRAP (sector tag 43) is stepped on. EXAMPLES: BD in EXAMPLE.MAP SEE ALSO: FIREBALL_TRAP (hitag 43), SPEAR_TRAP (hitag 63) Hitag 45: SECT_SO_DONT_ROTATE Causes a sector object to move without rotating as it follows its track or is driven by the player. Place in the center sector. EXAMPLES: FB in EXAMPLE.MAP SEE ALSO: SO_TURN_SPEED (hitag 55), SO_LIMIT_TURN (hitag 68) Hitag 46: PARALLAX_LEVEL TAG2 = parallax sky type Set parallax sky type to 0, 1, or 2. This value adjusts the xrepeat of the sky texture. You only need to place one per level in a single sector that uses a parallax sky texture, and it will affect the whole level. If more than one is placed in a map, the sky will usually behave strangely. EXAMPLES: BE in EXAMPLE.MAP Hitag 47: SECT_DONT_COPY_PALETTE Normally any sprites or the player standing on a palette swapped floor take on the palette of the floor. Use this ST1 on sectors where you don't want this to happen. EXAMPLES: BE in EXAMPLE.MAP Hitag 48: MULTI_COOPERATIVE_START TAG2 = (0 to 7) player number TAG4 = angle to start facing Spawn spots for cooperative multi-player games. The players' feet will be placed at the same height as the bottom of the ST1 sprite, so place them on the floor unless you want the player to fall. Always be sure to include start point #0. EXAMPLES: Any game map SEE ALSO: MULTI_PLAYER_START (hitag 42) Hitag 49: SO_SET_SPEED TAG2 = speed (2 to 128) Sets the speed at which a sector object follows a track. This is functionally the same as TRACK_SET_SPEED (tracktag 702). EXAMPLES: FA in EXAMPLE.MAP Hitag 50: SO_SPIN TAG2 = speed Causes a sector object to spin clockwise at the rate specified in TAG2. This is functionally the same as TRACK_SPIN (tracktag 715). EXAMPLES: EC in EXAMPLE.MAP SEE ALSO: SO_SPIN_REVERSE (hitag 51) Hitag 51: SO_SPIN_REVERSE TAG2 = speed Causes a sector object to spin counter-clockwise at the rate specified in TAG2. This is functionally the same as TRACK_SPIN_REVERSE (tracktag 720). EXAMPLES: EC in EXAMPLE.MAP SEE ALSO: SO_SPIN (hitag 50) Hitag 52: SO_BOB_START TAG2 = bobbing amount Causes a sector object to bob up and down continuously. TAG2 specifies how high the object will bob. This is functionally the same as TRACK_BOB_START (tracktag 717). EXAMPLES: $WHIRL.MAP SEE ALSO: SO_BOB_SPEED (hitag 53), SECT_SO_DONT_BOB (hitag 32) Hitag 53: SO_BOB_SPEED TAG2 = speed Place in the same sector with SO_BOB_START (hitag 52). TAG2 specifies the speed at which the sector object will bob. This is functionally the same as TRACK_BOB_SPEED (tracktag 718). EXAMPLES: $WHIRL.MAP SEE ALSO: SO_BOB_START (hitag 52), SECT_SO_DONT_BOB (hitag 32) Hitag 55: SO_TURN_SPEED TAG2 = speed (0 is fastest) Determines how fast a sector object turns to meet the new angle as it follows a track. The default is 4. For some reason this has no track tag functional equivalent. EXAMPLES: FA in EXAMPLE.MAP SEE ALSO: SECT_SO_DONT_ROTATE (hitag 45), SO_LIMIT_TURN (hitag 68) Hitag 56: LAVA_ERUPT TAG2 = (1 to 1024) The larger the number the more stuff erupts. TAG3 = type of eruption 0 = lava shards 1 = volcano boulders TAG4 = angle of eruption TAG5 = angle delta from TAG4 TAG6 = max x/y velocity TAG7 = z velocity amount TAG8 = z velocity random amount - added to TAG5 value TAG9 = erupt for this many seconds - default 10 TAG10 = wait for this many seconds till next eruption BOOL1 = don't spawn unless player is in TRIGGER_SECTOR This ST1 will spawn lava debris at its location. The lava will constantly erupt in intervals (killing framerate) unless BOOL1 is set to "1", in which case you will need to set up trigger sectors. See TRIGGER_SECTOR (hitag 140.) Then the lava will only erupt while the player is standing in those sectors. EXAMPLES: BF in EXAMPLE.MAP Hitag 57: SECT_EXPLODING_CEIL_FLOOR TAG2 = match Pulls the ceiling and floor together at pre-map. The ceiling and floor can then be explosively blown apart by shooting a TAG_SPRITE_HIT_MATCH (lotag 257), otherwise known as a crack sprite. The TAG_SPRITE_HIT_MATCH hitag must match TAG2 of this ST1. EXAMPLES: CA in EXAMPLE.MAP SEE ALSO: SECT_COPY_DEST (hitag 58), SECT_COPY_SOURCE (hitag 59) Hitag 58: SECT_COPY_DEST TAG2 = match TAG3 = sector source-dest match Effectively copies all of the source sector attributes to the destination sector when triggered. This is probably the most powerful feature of Shadow Warrior, because it lets you do so many cool things to a map. Examples are scattered throughout almost every map. You can do things like blow a hole in the floor and reveal a hidden swimmable stream, lava pool, or gettable item. It will move sprites from the source to the destination also. It's very important that the source and destination sectors be congruent. TAG2 is an event match (i.e. hit a switch and the copy occurs), while TAG3 serves to identify which source sector belongs to which destination sector when copying multiple sectors at the same time. Copy sector 58-59 tags will activate in conjuction with matching SECT_MOVE_WALL (hitag 103) tags AFTER the copy is done. Copy sector 58-59 tags should remove any visible sprites from the destination sector, although this doesn't apply to gettable items. Copy sector 58-59 tags will activate in conjuction with matching SPAWN_SPOT tags AFTER the copy is done. EXAMPLES: CB in EXAMPLE.MAP SEE ALSO: SECT_COPY_SOURCE (hitag 59), SECT_EXPLODING_CEIL_FLOOR (hitag 57) Hitag 59: SECT_COPY_SOURCE TAG2 = match TAG3 = sector source-dest match This is the source from which a destination sector is copied. See SECT_COPY_DEST (hitag 58) for more information. EXAMPLES: CB in EXAMPLE.MAP SEE ALSO: SECT_COPY_DEST (hitag 58), SECT_EXPLODING_CEIL_FLOOR (hitag 57) Hitag 62: SHOOT_POINT TAG2 = match - if non 0 then it will call DoMatchEverything every time sector object is fired. Can be a one time operation with BOOL1. TAG3 = ammo type -1/255 = Do nothing shoot point - primarily to make the player's weapon go away 0 = Tank shell 1 = Machine gun 2 = Laser 3 = Rail gun 4 = Fireball 5 = Rocket 6 = Micro Missle Battery TAG4 = angle TAG5 = delay until next fire in 120th of a second tics (i.e. 60 = half a second) Defaults to 80, except ammo type 1, which defaults to 6. TAG6 = Sound Spot match - Calls SOUND_SPOT (hitag 134) with this match tag BOOL1= If "1" then TAG2 is reset to 0 after the first use. For operational sector objects and auto turrets. Sets the point from which the sector object shoots. Place on the end of a gun barrel and point the sprite in the desired shooting direction. When a shoot point exists on an operational sector object, the player's weapon is no longer used, otherwise the player's weapon stays up. Sometimes TAG6 is not needed because some ammo types have default sounds. EXAMPLES: EE and EF in EXAMPLE.MAP Hitag 63: SPEAR_TRAP TAG2 = match TAG4 = ang Shoots an arrow from the location of this sprite in the direction the angle is pointing when a sector tagged TAG_TRIGGER_MISSILE_TRAP (sector tag 43) is stepped on. EXAMPLES: BD in EXAMPLE.MAP SEE ALSO: FIREBALL_TRAP (hitag 43), BOLT_TRAP (hitag 44) Hitag 64: SO_SYNC1 Place in a sector object. Keeps sector objects running a constant rate so they can stay in sync better if needed. Possibly useful for meshing gears or something. If it's rideable use SYNC1. Only use this when you absolutely need to. (NOTE: This isn't used anywhere in Shadow Warrior, and probably isn't even necessary.) SEE ALSO: SO_SYNC2 (hitag 65) Hitag 65: SO_SYNC2 Same as SO_SYNC1 (hitag 64), only slightly faster. If it's rideable use SYNC1. Only use this when you absolutely need to. (NOTE: This isn't used anywhere in Shadow Warrior, and probably isn't even necessary.) Hitag 66: DEMO_CAMERA TAG2 = delta ang TAG3 = camera type (0 or 1) TAG4 = angle A third person camera view which is used when playing back demos, or when playing with the -cam command line option. Point it in the direction you want the camera to face. TAG2 is the amount the camera will turn in either direction (512 = 90 degrees). If TAG3 is 1, then a special camera will be used which orbits around the player at a constant distance, speed, and height, until the player moves out of the camera's view. EXAMPLES: FD in EXAMPLE.MAP SEE ALSO: MIRROR_CAM (hitag 1000) Hitag 68: SO_LIMIT_TURN TAG2 = delta ang Limit the turning of sector object. Especially useful with turrets. Point the SO_LIMIT_TURN sprite in the center direction. TAG2 is the amount the sector object can pivot in either direction. (512 = 90 degrees either way, for a 180 degree total range of motion) EXAMPLES: EE in EXAMPLE.MAP SEE ALSO: SECT_SO_DONT_ROTATE (hitag 45), SO_TURN_SPEED (hitag 55) Hitag 69: SPAWN_SPOT TAG2 = Match TAG3 = Type of effect to spawn 0 = Nothing 1 = Breaking glass 2 = Wood smashed 3 = Smoke, but only used for damaged sector objects 4 = Rice paper (silent) 5 = Blood splat (silent) 6 = Standard explosion 7 = Explosion w/phosphorous 8 = Breaking metal 9 = Crumbling stone 11 = Gib splat 12 = Wood smashed 13 = Crumbling stone TAG4 = Direction debris flies out in TAG5 = Time delay before activating in 1/8 second tics TAG6 = Always set this equal to TAG3 TAG8 = Number of shrap pieces (default value of 0 will pick a programmed default number) TAG9 = Random Z range in pixels from ST1 z position TAG10= Increase size of shraps (0-255) Spawn some effect triggered by just about anything. This is used a lot throughout the game for various special effects, including crumbling ceilings, large complex explosions, and breakable sprites. EXAMPLES: CC in EXAMPLE.MAP SEE ALSO: SECT_EXPLODING_CEIL_FLOOR (hitag 57), SPAWN_ITEMS (hitag 149) Hitag 70: SO_MATCH_EVENT TAG2 = Match TAG3 = Spin_speed adjust - can be negative or positive TAG7 = Velocity adjustment BOOL1 = Velocity adjustment type 0: Velocity adjust is instant 1: Velocity adjust is approached BOOL2 = Direction flip 0: False 1: True BOOL3 = Toggle help only used for triggers and things that don't have a definite ON/OFF. 0: Off 1: On Certain sector object effects, like SO_SCALE_INFO (hitag 100) and SO_KILLABLE (hitag 80), can be triggered by a match tag event. This is accomplished using SO_MATCH_EVENT. The adjustment values are added when the event is ON, and they are subtracted when the event is OFF. You may need to experiment with this a bit, since we didn't use it very much in the game. EXAMPLES: EE in EXAMPLE.MAP Hitag 71: SO_SLOPE_FLOOR_TO_POINT Aligns a sloping floor sector in a sector object to a point tagged as TAG_WALL_ALIGN_SLOPE_TO_POINT (walltag 550). Generally used with a spike or drill effect rising up from the floor. See also SO_SLOPE_CEILING_TO_POINT (hitag 72). Hitag 72: SO_SLOPE_CEILING_TO_POINT Aligns a sloping floor sector in a sector object to a point tagged as TAG_WALL_ALIGN_SLOPE_TO_POINT (walltag 550). Generally used with a tornado or whirlpool effect coming down from the ceiling. See also SO_SLOPE_FLOOR_TO_POINT (hitag 71). EXAMPLES: ED in EXAMPLE.MAP Hitag 73: SO_TORNADO This sets up a sector object to behave like a tornado. EXAMPLES: ED in EXAMPLE.MAP SEE ALSO: SO_AMOEBA (hitag 75), SO_AUTO_TURRET (hitag 81) Hitag 75: SO_AMOEBA This sets up a sector object to behave like an amoeba. EXAMPLES: EC in EXAMPLE.MAP SEE ALSO: SO_TORNADO (hitag 73), SO_AUTO_TURRET (hitag 81), SO_SCALE_INFO (hitag 100) Hitag 76: SO_MAX_DAMAGE TAG2 = Max amount of damage a sector object can take before breaking TAG3 = Always set to 0 TAG5 = Initial damage setting (-1 is broken) - if this value is 0 it is set to the value of TAG2 (full health) Damage for operational and auto turret sector objects. Sector objects only take damage from explosive type weapons, not machine gun types. Be sure to add a SPAWN_SPOT (hitag 69) with TAG3 set to 3 for the smoke effect. When the driveable is broken, it will trigger the smoke, and when the object is repaired, the smoke will go away again. EXAMPLES: EE in EXAMPLE.MAP SEE ALSO: SO_KILLABLE (hitag 80) Hitag 77: SO_RAM_DAMAGE TAG2 = Damage amount Damage amount done by ramming with an operational sector object. Not needed for running over actors, since this is done by default. This is usually used for ramming killable sector objects or other operational sector objects. Hitag 80: SO_KILLABLE Marks a sector object as killable. Make sure the center sector of the sector object has a sector lotag of 95. A sector object can be killed either when it receives enough damage, set by SO_MAX_DAMAGE (hitag 76), or when a match event occurs, set by SO_MATCH_EVENT (hitag 70). A killable sector object is actually completely deleted by becoming part of the sector surrounding the sector object. EXAMPLES: EE in EXAMPLE.MAP Hitag 81: SO_AUTO_TURRET A sector object with a SO_AUTO_TURRET ST1 will always turn to face the player. Useful for a variety of effects, since it won't shoot the player unless you give it a SHOOT_POINT (hitag 62). A SHOOT_POINT on an auto turret will only fire the machine gun ammo type. The sector object center must have a sector hitag of 96 or 98 for this to work properly. EXAMPLES: EE in EXAMPLE.MAP SEE ALSO: SO_AMOEBA (hitag 75), SO_TORNADO (hitag 73) Hitag 82: SECT_DAMAGE TAG2 = Damage done per second BOOL1 = 0, Does damage when touching floor of sector BOOL1 = 1, Does damage above sector - like swimming in lava Causes a sector to do damage to players and actors. EXAMPLES: CD in EXAMPLE.MAP Hitag 84: WARP_TELEPORTER TAG2 = Match TAG3 = Type 0 = (default) Always teleports you to the matching sprite location at the angle the sprite is facing 1 = (offset) Always teleports you by the offset. Does not affect the angle. TAG4 = Angle TAG5-8 = Random match locations in addition to TAG2 TAG10 = Teleport or don't 0 = (two-way) Teleport when you enter this sector 1 = (one-way) Don't teleport when you hit this sector Magic teleporter warps just about anything from one sector to another. If TAG3 is "0", then a magic shimmering effect and sound will occur. It is very important that the destination sector be at least as large as the source sector, or the game may quit with an error. EXAMPLES: CD in EXAMPLE.MAP SEE ALSO: WARP_CEILING_PLANE (hitag 85), WARP_FLOOR_PLANE (hitag 86), WARP_COPY_SPRITE1 (hitag 87), WARP_COPY_SPRITE2 (hitag 88) Hitag 85: WARP_CEILING_PLANE TAG2 = Match If the player's view (or a NPC Z coordinate) goes ABOVE the Z position of this ST1 sprite then a warp to the Z coordinate of the matching WARP_FLOOR_PLANE (hitag 86) will occur. EXAMPLES: CE in EXAMPLE.MAP SEE ALSO: WARP_TELEPORTER (hitag 84), WARP_FLOOR_PLANE (hitag 86), WARP_COPY_SPRITE1 (hitag 87), WARP_COPY_SPRITE2 (hitag 88), Hitag 86: WARP_FLOOR_PLANE TAG2 = Match If the player's view (or a NPC Z coordinate) goes BELOW the Z position of this ST1 sprite then a warp to the Z coordinate of the matching WARP_CEILING_PLANE will occur. EXAMPLES: CE in EXAMPLE.MAP SEE ALSO: WARP_CEILING_PLANE (hitag 85), WARP_TELEPORTER (hitag 84), WARP_COPY_SPRITE1 (hitag 87), WARP_COPY_SPRITE2 (hitag 88) Hitag 87: WARP_COPY_SPRITE1 TAG2 = Match WARP_COPY_SPRITE2 tag Any sprite that enters a sector marked with WARP_COPY_SPRITE1 will cause a duplicate image to appear in the sector marked with a WARP_COPY_SPRITE2 (hitag 88) with matching TAG2. EXAMPLES: CE in EXAMPLE.MAP SEE ALSO: WARP_CEILING_PLANE (hitag 85), WARP_FLOOR_PLANE (hitag 86), WARP_TELEPORTER (hitag 84), WARP_COPY_SPRITE2 (hitag 88) Hitag 88: WARP_COPY_SPRITE2 TAG2 = match WARP_COPY_SPRITE1 tag Any sprite that enters a sector marked with WARP_COPY_SPRITE2 will cause a duplicate image to appear in the sector marked with a WARP_COPY_SPRITE2 (hitag 87) with matching TAG2. EXAMPLES: CE in EXAMPLE.MAP SEE ALSO: WARP_CEILING_PLANE (hitag 85), WARP_FLOOR_PLANE (hitag 86), WARP_COPY_SPRITE1 (hitag 87), WARP_TELEPORTER (hitag 84) Hitag 90: PLAX_GLOB_Z_ADJUST TAG2 = Ceiling z movement in pixels TAG3 = Floor z movement in pixels Global parallax ceiling and floor adjustment. Default is 500 pixels. This affects how far past the actual surface height a sprite can move in sectors with parallax ceilings and floors. SEE ALSO: FLOOR_Z_ADJUST (hitag 98), CEILING_Z_ADJUST (hitag 97), SECT_SINK (hitag 0) Hitag 92: SECT_VATOR TAG2 = match TAG3 = Type 0 = Manual/Switch/Trigger - Primarily used for a basic manually operated door. If a manual type has a match tag that is not 0 then ALL vators with the same match type will be operated on. Manual operation - works from either within the sector or alongside of the sector. Switch operation - switch resets when the vator goes to default position. Trigger operation - same as switch but it's a floor trigger. 1 = Switch/Trigger Only - Cannot be operated manually ALL vator types with the same matching tag get operated on 2 = Automatic - Starts Active 3 = Automatic - Starts Inactive - must be turned on with a switch or trigger TAG4 = Speed TAG5 = Acceleration at which door approaches TAG4 TAG6 = Match at destination - when a vator reaches its destination it will trigger any event with this match tag TAG9 = Auto return time - 1/8th of a second resolution - if non 0 then the vator will return to default position after alloted time - if 0 then it will stay in the on position until operated again BOOL1= 0: Start in the off position 1: Start in the on position BOOL2= 0: Toggle 1: Operate once only BOOL3= 0: Crush player 1: Don't crush player BOOL4 = 0: Operate in WangBang games 1: Not allowed to operate in WangBang games BOOL5 = 0: Don't call TAG6 match when moving to OFF position 1: Call TAG6 match when moving to the ON or OFF position BOOL6 = 0: Wait until motion is complete before it can be operated again 1: Can be operated again while sector is in motion BOOL7 = 0: Actors are allowed to operate this vator 1: Actors can't operate this vator BOOL11= 1: Displays "Single play only" message when operated in WangBang. Use with BOOL4. Elevators, stompers, doors, lifts and other tricks are collectively called "vators." The "off" position is the position of the sector in BUILD, the "on" position is the height of the ST1 sprite. Flip the ST1 sprite upside down (by pressing "F" twice on it) to do a ceiling vator like a door or stomper. Any vator can be locked by placing a SECT_LOCK_DOOR (hitag 29) in the same sector. Two SECT_VATOR sprites can be placed in a sector to operate the ceiling and floor separately. EXAMPLES: DB in EXAMPLE.MAP SEE ALSO: SECT_ROTATOR (hitag 143), SECT_SLIDOR (hitag 145), SECT_SPIKE (hitag 106) Hitag 97: CEILING_Z_ADJUST TAG2 = Amount Allows the player and actors to 'sink' into the ceiling of a sector by the amount in TAG2. The player view will probably be strange unless the ceiling texture is a parallax sky. EXAMPLES: $VOLCANO.MAP SEE ALSO: PLAX_GLOB_Z_ADJUST (hitag 90), FLOOR_Z_ADJUST (hitag 98), SECT_SINK (hitag 0) Hitag 98: FLOOR_Z_ADJUST TAG2 = Amount Allows the player and actors to sink into the floor of a sector by the amount in TAG2. EXAMPLES: AB and CE in EXAMPLE.MAP SEE ALSO: PLAX_GLOB_Z_ADJUST (hitag 90), CEILING_Z_ADJUST (hitag 97), SECT_SINK (hitag 0) Hitag 99: FLOOR_SLOPE_DONT_DRAW Use this ST1 in any sector with a sloped floor and the slope angle will be set to 0 when the scene is drawn. The sector will still act like a slope for all movement purposes. EXAMPLES: CE in EXAMPLE.MAP Hitag 100: SO_SCALE_INFO TAG2 = Speed TAG3 = Start position 0 = start at min 1 = start at max TAG4 = Initial type 0 = None 1 = Hold 2 = Destination 3 = Random 4 = Cycle 5 = Random point Needs SO_SCALE_POINT_INFO (hitag 101) TAG5 = Min dist - distance from default size to scale inward TAG6 = Max dist - distance from default size to scale outward TAG7 = Activate type - same types as TAG4, but this what happens after the sector object is activated with a SO_MATCH_EVENT (hitag 70) TAG8 = Random frequency (0-64) - The lower the number the slower the random direction change. This allows you to scale simple sector objects. "Hold" type maintains the default scale. "Destination" moves either to the minimum or maximum scaling size. "Random" is just that - the sector object scales larger and smaller randomly. "Cycle" continuously scales from min to max and back again. "Random point" is just like a SO_AMOEBA (hitag 75), except that SO_SCALE_INFO gives you greater control over its behavior. EXAMPLES: EE in EXAMPLE.MAP, the amoeba in $SHRINE.MAP SEE ALSO: SO_AMOEBA (hitag 75), SO_SCALE_POINT_INFO (hitag 101) Hitag 101: SO_SCALE_POINT_INFO TAG2 = Speed TAG4 = Random freqency - 0 to 1024 - the lower the number the slower the direction change TAG5 = Min dist - dist from default size to scale inward TAG6 = Max dist - dist from default size to scale outward SO_SCALE_POINT_INFO is used with a SO_SCALE_INFO (hitag 100) ST1 to provide information about how the vertices should behave. TAG5 and TAG6 are used to designate how far in and out the individual vertices should move at the speed in TAG2. Be careful; when wall points cross each other, strange and unpredictable sector behavior can occur. EXAMPLES: The amoeba in $SHRINE.MAP SEE ALSO: SO_AMOEBA (hitag 75), SO_SCALE_INFO (hitag 100) Hitag 102: SO_SCALE_XY_MULTIPLY TAG5 = x multiply value; 256 is equal to 1 TAG6 = y multiply value; 256 is equal to 1 Use in conjunction with SO_SCALE_INFO (hitag 100) and SO_SCALE_POINT_INFO (hitag 101). Try experimenting with this to see what kind of effects you can achieve. Hitag 103: SECT_WALL_MOVE TAG2 = Match - triggering one of these will trigger all SECT_WALL_MOVE ST1's with the same matching tags. This will also trigger SPAWN_SPOT ST1's. TAG3 = Match with a SECT_WALL_MOVE_CANSEE (hitag 104) TAG4 = Angle - point in the direction you want the wall point to move TAG5 = Pic 1 - Next wall texture TAG6 = Pic 2 - Previous wall texture TAG7 = Shade 1 - Next wall shade TAG8 = Shade 2 - Previous wall shade TAG9 = Number of times the point can be shot TAG10= Random angle difference - 1 to 128 - the larger the number the greater the angle deviance. TAG13= Distance to move point each time it's shot BOOL1= 0: Can work independently 1: Only activated as part of a TAG3 group This creates a dentable wall. Every time the wall vertex is shot with an explosive weapon, it will move the distance in TAG13, up to TAG9 times. Place the ST1 sprite on TOP of the vertex to move. One vertex will move. Every vertex is associated with two walls: the next wall and the previous wall. If TAG5 or TAG6 are non-zero, then that wall will take on the specified texture when the vertex is shot. If TAG7 or TAG8 are non-zero, then that wall will take on the new shade value specified. This will work for sector object walls with one limitation: you cannot tag the outside wall loop tagged with a 504 to be moveable. NOTE: Changing the value of TAG13 will cause the ST1 sprite to move strangely in 3D editing mode. Don't worry. If 2D mode says it's on the vertex, then it's on the vertex. EXAMPLES: DA in EXAMPLE.MAP SEE ALSO: SECT_WALL_MOVE_CANSEE (hitag 104), SPAWN_SPOT (hitag 69), SECT_EXPLODING_CEIL_FLOOR (hitag 57) Hitag 104: SECT_WALL_MOVE_CANSEE TAG2 = Match with TAG3 of SECT_MOVE_WALL (hitag 103) Placing sprites on wall points renders them somewhat unreliable for certain engine routines. If there is a problem activating a SECT_MOVE_WALL, set up one of these off of the wall point for the engine to use for detection purposes. I have never needed to use this. EXAMPLES: DA in EXAMPLE.MAP Hitag 106: SECT_SPIKE TAG2 = Match TAG3 = Type 0 = Manual/Switch/Trigger - primarily used for manual type. If a manual type has a match tag that is not 0 then ALL spikes with the same match type will be operated on. A spike can be manually operated from either within the sector, or to the side. With switch operation, the switch resets when the spike goes to default position. With trigger operation, it's the same as a switch but it's a floor trigger. 1 = Switch/Trigger Only - cannot be operated manually ALL spike types with the same matching tag get operated on by the switch or trigger. 2 = Automatic - Starts active 3 = Automatic - Starts inactive, must be activated with a switch or trigger. TAG4 = Speed TAG5 = Acceleration at which TAG4 speed is approached TAG6 = Match at destination - when a spike reaches its destination it will trigger any event with this match tag TAG7 = Sector object number to operate on. Set to -1 if the SECT_SPIKE is not in a sector object. TAG9 = Auto return time - 1/8th of a second resolution - if non 0 then the spike will return to its default position after the alloted time. If 0 then it will stay in the ON position until the spike is operated again. BOOL1= 0: Start in the off position 1: Start in the on position BOOL2= 0: Toggle 1: Operate once only BOOL3= 0: Crush player 1: Don't crush player BOOL4= 0: Operate in WangBang games 1: Not allowed to operate in WangBang games BOOL5= 0: Don't call TAG6 match when moving to OFF position 1: Call TAG6 match when moving to the ON or OFF position BOOL6= 0: Wait until motion is complete before it can be operated again 1: Can be operated again while sector is in motion BOOL7= 0: Actors are allowed to operate this spike 1: Actors can't operate this spike BOOL11=1: Displays "Single play only" message when operated in WangBang. Use with BOOL4. A "spike" is the term for a dynamic slope in Shadow Warrior. Useful for tilting ramps and slides, or special ceiling effects like a drill. A spike behaves pretty much like a vator, except instead of the floor height moving to the ST1, the floor instead slopes to the height of the ST1. Remember that slopes always hinge on the "first wall" of a sector (set with Alt-F). To do a spike from the ceiling, flip the ST1 sprite upside down (press "F" twice on the sprite in 3D mode). "Off" position is the position of the sector, "on" position is the height of the ST1 sprite. WARNING: Don't forget to put that -1 in TAG7! Shadow Warrior will usually crash if you forget to do this. EXAMPLES: DC in EXAMPLE.MAP SEE ALSO: SECT_ROTATOR (hitag 143), SECT_SLIDOR (hitag 145), SECT_VATOR (hitag 92), SLIDE_SECTOR (hitag 135) Hitag 108: LIGHTING TAG2 = Match TAG3 = Type 0 = Constant 1 = Flicker 2 = Fade 3 = Flicker ON 4 = Fade to ON/OFF TAG4 = Timing - the smaller the number, the faster a light flickers or fades TAG5 = Brighten amount - This is not an actual shade amount, instead, this is the value the ST1 will subtract from the sector's shade value (QUOTE-S in 3D mode) when it is turned on. TAG6 = Darken amount - This is not an actual shade amount, instead, this is the value the ST1 will add to the sector's shade value when it is turned off. TAG7 = Shade increment/decrement for fading lights - default is 1 BOOL1= 0: Light is off 1: Light is on BOOL2= 1: Don't affect floor BOOL3= 1: Don't affect ceiling BOOL4= 1: Don't shade walls BOOL5= 1: Shade outer walls - red sectors have inner and outer walls - by default LIGHTING will not shade the outer walls BOOL6= 1: Don't affect the palette of the sector BOOL8= 1: Invert intensity. This means that the sector will be brightened by TAG6 amount when the light is on, and darkened by TAG5 amount when the light is off. This is useful for making lights that flicker when they are broken. BOOL10= Direction to start a fade The sector will have the same palette as the LIGHTING sprite, even if the light is turned off. All LIGHTING ST1's with the same match tags will operate together. WARNING: Every LIGHTING sprite tends to have its own independent rate of fade or flicker. This means that if you a have a room comprised of multiple sectors and you put a flickering LIGHTING ST1 in every sector, they will all flicker at different rates and look really bad even if their TAG2's match. If you want a room of uniform flickering or fading, you need to place a single LIGHTING sprite in one sector and use LIGHTING_DIFFUSE (hitag 109) in all the sectors you want to share that lighting effect. EXAMPLES: DD in EXAMPLE.MAP SEE ALSO: LIGHTING_DIFFUSE (hitag 109) Hitag 109: LIGHTING_DIFFUSE TAG2 = Match to a LIGHTING (hitag 108) TAG2 TAG3 = Shade multiplier - the higher this number, the more quickly the light grows dark with distance from the light source TAG4 = Distance - 1 to 20 for diffuse lighting - The larger the number the more distant, and therefore darker the shade from the source. BOOL2= 1: Don't affect floor BOOL3= 1: Don't affect ceiling BOOL4= 1: Don't affect walls BOOL5= 1: Shade outer walls - red sectors have inner and outer walls - by default LIGHTING_DIFFUSE will not shade outer walls BOOL6= 1: Dont change palette Used with LIGHTING (hitag 108) to shade other sectors on a grade. Also used to copy a lighting effect (flickering, fading, palette) uniformly over multiple sectors. Though its difference from Duke Nukem's lighting may at first seem confusing, this method is actually more convenient. Once all the LIGHTING_DIFFUSE sprites are in place, you can change the lighting effect for an entire group of sectors just by changing the values of one sprite: the LIGHTING (hitag 108) ST1. EXAMPLES: DD in EXAMPLE.MAP SEE ALSO: LIGHTING (hitag 108) Hitag 110: VIEW_LEVEL1 TAG2 = View tag match TAG4 = Point up to turn it OFF Point down to turn it ON A matching VIEW_LEVEL sprite must be in both the upper and lower sectors of any room-over-room areas where the player can look through the ceiling or floor into the other area. Use VIEW_LEVEL1 in the lower areas. See ADVANCED.TXT for guidelines to building room-over-room areas. EXAMPLES: AC, AD, and FC in EXAMPLE.MAP SEE ALSO: VIEW_LEVEL2 (hitag 111), VIEW_THRU_CEILING (hitag 120), VIEW_THRU_FLOOR (hitag 121), BOUND_FLOOR_BASE_OFFSET (hitag 202), BOUND_FLOOR_OFFSET (hitag 203) Hitag 111: VIEW_LEVEL2 TAG2 = View tag match TAG4 = Point up to turn it OFF Point down to turn it ON A matching VIEW_LEVEL sprite must be in both the upper and lower sectors of any room-over-room areas where the player can look through the ceiling or floor into the other area. Use VIEW_LEVEL2 in the upper areas. See ADVANCED.TXT for guidelines to building room-over-room areas. EXAMPLES: AB, AE, and FE in EXAMPLE.MAP SEE ALSO: VIEW_LEVEL1 (hitag 110), VIEW_THRU_CEILING (hitag 120), VIEW_THRU_FLOOR (hitag 121), BOUND_FLOOR_BASE_OFFSET (hitag 202), BOUND_FLOOR_OFFSET (hitag 203) Hitag 120: VIEW_THRU_CEILING TAG2 = View tag match Use this in a sector with a floor mirror texture on the ceiling in the lower half of a room-over-room area. The ST1 sprite must be in the same relative location in the sector as the VIEW_THRU_FLOOR (hitag 121) sprite in the upper sector. TAG2 will be the same as all the VIEW_LEVEL sprites and the VIEW_THRU_FLOOR sprite. See ADVANCED.TXT for guidelines to building room-over-room areas. EXAMPLES: AC, AD, and FC in EXAMPLE.MAP SEE ALSO: VIEW_LEVEL1 (hitag 110), VIEW_LEVEL2 (hitag 111), VIEW_THRU_FLOOR (hitag 121), BOUND_FLOOR_BASE_OFFSET (hitag 202), BOUND_FLOOR_OFFSET (hitag 203) Hitag 121: VIEW_THRU_FLOOR TAG2 = View tag match Use this in a sector with a floor mirror texture on the floor in the upper half of a room-over-room area. The ST1 sprite must be in the same relative location in the sector as the VIEW_THRU_CEILING (hitag 120) sprite in the lower sector. TAG2 will be the same as all the VIEW_LEVEL sprites and the VIEW_THRU_CEILING sprite. See ADVANCED.TXT for guidelines to building room-over-room areas. EXAMPLES: AB, AE, and FE in EXAMPLE.MAP SEE ALSO: VIEW_LEVEL1 (hitag 110), VIEW_THRU_CEILING (hitag 120), VIEW_LEVEL2 (hitag 121), BOUND_FLOOR_BASE_OFFSET (hitag 202), BOUND_FLOOR_OFFSET (hitag 203) Hitag 132: BREAKABLE TAG2 = Match - used to match up with BREAKABLE_SPRITE (hitag 132 on a non-ST1 sprite) or TAG_BREAK_WALL (walltag 307) TAG5 = Picnum to change to after BROKEN Not needed if TAG8 = "1" TAG7 = Number of damage hits to take before a sprite or wall texture is BROKEN. Note that if this is set to 2 or greater the picnum will increment toward TAG5 until TAG5 is reached. The graphics in the art file must be imported in the correct order to support this. Nothing in Shadow Warrior uses this, but the functionality is there for anybody who feels like importing their own art. TAG8 = BROKEN type: 0 = Change the picnum only 1 = Kill sprite/wallpic when BROKEN For walls this will turn off masking, blocking, and 1-way. 2 = Turn off blocking bits when BROKEN For walls this will just turn off blocking bits, but leave the masking or 1-way alone. Breaking an air vent grate is an example of this. Sprites and wall breaking info. There are 2 ways to use this: 1) As ST1 sprite info for breaking a sprite, or 2) As ST1 sprite info for breaking a wall. NOTE: Can be re-used for many BREAKABLE_SPRITEs. Example: All chairs that break could use a single ST1 132 to tell them how to break as long as the same matching TAG2 is used. When hitting a wall tagged with TAG_WALL_BREAK (307) the code will look for a BREAKABLE_SPRITE ST1 with a matching tag and use this info if found. EXAMPLES: DE in EXAMPLE.MAP Hitag 132: BREAKABLE_SPRITE (This is used with non-ST1 sprites to make them breakable) TAG2 = Match - used to match up with BREAKABLE ST1's TAG6 = Match - extra match value for activating ST1's like SPAWN_SPOT and LIGHTING. By this method you can spawn debris or turn off a light when this sprite is broken. BOOL1= 1: Denotes that this is not an ST1 but is tagged like one. IMPORTANT: THIS MUST BE SET TO "1". BOOL2= 1: Don't break this sprite. Use this to override automatic breakables. Use this tagging on the actual sprite you want to break. TAG2 should match the TAG2 of the BREAKABLE (hitag 132) ST1 that tells this sprite how to break. NOTE: You don't actually need the ST1 132 if you just want to kill the sprite when its broken. Giving it a hitag of 132 and setting BOOL1 is sufficient. EXAMPLES: DE in EXAMPLE.MAP Hitag 133: QUAKE_SPOT TAG2 = Match TAG3 = Shake Z amount - This is the amount the view moves in the Z direction. TAG4 = Radius of quake - distance in which quake is felt - this value is multiplied by 8 internally for the distance. The code is set up so that the quake amount decreases from the epicenter, but this effect can be overridden by setting BOOL1 to "1" TAG5 = Duration of quake in seconds TAG6 = Timed quake - shake the screen every X seconds, where X = TAG6 multiplied by 10. TAG7 = Shake angle amount - amount the view's angle moves TAG8 = Shake x,y position amount - multiplied by 8 internally TAG9 = Random quake value (1 to 128). Multiplied by 4 internally. Used with TAG6. Instead of automatically spawning a quake after time it does a random test. The larger the number the greater the chance of a quake. 0 is default - will not do random test. BOOL1= 1: Quake does not decrease from epicenter, and will basically shake the entire level. BOOL2= 1: Only quake once and never again BOOL3= 1: Wait for trigger before starting timed quake code. This is only used for timed quakes. This is used to shake the player's view as though an earthquake were happening. EXAMPLES: DE in EXAMPLE.MAP Hitag 134: SOUND_SPOT TAG2 = Match TAG4 = 1st Sound # TAG5 = 2nd Sound # TAG6 = 3rd Sound # BOOL1= 1: Play the sound once and only once BOOL2= 1: Play the sound as a looping sound. The sound will continue to loop until stopped by STOP_SOUND_SPOT (hitag 150). 1: Also means follow sprite, and needs to be set if the ST1 sprite will be moving (usually with a sector object.) BOOL3= 1: Random play. When the ST1 is triggered, it will randomly choose between sounds 1 and 2 or between sounds 1, 2, and 3. BOOL4= 1: Don't pan sound. This is useful when the sound is very near the player. BOOL5= 1: Use doppler effect. BOOL6= 0: Make sure this is always reset to "0". BOOL7= 1: The sound is Lo Wang's voice, heard inside his head at max volume no matter how far from the SOUND_SPOT he is. SOUND_SPOT will play the sound specified in TAG4 when the match tag in TAG2 is triggered. SOUND_SPOT can also be triggered by operating a vator, spike, sliding door, or rotating door with the same match tag. Sound numbers can be obtained from the digital sound index in SWSOUNDS.TXT. Don't confuse these with ambient sounds, which are used with the AMBIENT_SOUND (hitag 1002) ST1. If SOUND_SPOT is placed in a sector object operational sector, the 1st sound (TAG4) will be the 'idle' sound. The 2nd sound (TAG5) will be the 'drive' sound. IMPORTANT: The match tag (TAG2) will still need to be a unique value even though the mapper never sets up a trigger for it. If you do not use a unique value then other SOUND_SPOTs with the match value will do the same sound processing. This could be used as a feature - drive something and something else on the level makes a noise. Note that you can specify 3 different sounds. Some things like vators can have more than one sound attached for different operations such as moving to the ON and OFF positions. Most of the time only the 1st sound (TAG4) will be used. EXAMPLES: DB, DC, DD, and others in EXAMPLE.MAP SEE ALSO: AMBIENT_SOUND (hitag 1002) Hitag 135: SLIDE_SECTOR TAG2 = Speed value. (0 is fastest, 32 is slowest) Note that the angle of the slope also has an effect on speed. Tag a sloped sector with this and it will cause the player to slide in the direction of the slope. Actors are not affected. The steeper the slope, and the lower the TAG2 value, the faster the slide. Lo Wang will slide even if he is in the air over the sector. Use with SECT_SPIKE (hitag 106) to create a variable speed slide. EXAMPLES: DF in EXAMPLE.MAP Hitag 136: CEILING_FLOOR_PIC_OVERRIDE TAG2 = Picnum (from the "V" menu) TAG3 = 0: Pic override on the ceiling 1: Pic override on the floor TAG7 = Draw type 0 = normal 1 = masked 2 = translucent 3 = very translucent BOOL1= 1: Block hitscans This is primarily used to give a floor or ceiling texture to the floor mirror in room-over-room areas. This is used in Shadow Warrior to create the translucent water, the reflective floors, and the masked grating in $VOLCANO.MAP. A sloped floor cannot have a masked or translucent texture. Use with FLOOR_Z_ADJUST (hitag 98) to keep the player from falling through into the lower area. Actors can stand on it too, but will usually fall through when they are killed. EXAMPLES: AB and AD in EXAMPLE.MAP SEE ALSO: FLOOR_Z_ADJUST (hitag 98) Hitag 140: TRIGGER_SECTOR TAG2 = Match TAG3 = Type 0 = Trip Entering Sector 1 = Trip Leaving Sector 2 = Continuous as long as you're standing on it 3 = Operated with the SPACEBAR TAG4 = Angle TAG5 = Trigger definition 0 = Remote sector object trigger 1 = Lava Erupt trigger TAG7 = Remote sector object number BOOL1= 0: Player's view follows the sector object 1: Player's view stays at the angle of TRIGGER_SECTOR TRIGGER_SECTOR is only used for two things: driving remote controlled operational sector objects, and triggering LAVA_ERUPT ST1's. BOOL1 on the LAVA_ERUPT (hitag 56) sprite must be set to BOOL1 for this trigger to work. EXAMPLES: BF and EF in EXAMPLE.MAP SEE ALSO: SECT_OPERATIONAL (hitag 1), LAVA_ERUPT (hitag 56) Hitag 141: DELETE_SPRITE TAG2 = Match BOOL2= Move with a sector object Place a DELETE_SPRITE ST1 at the same x, y location as another sprite. When the TAG2 match is triggered, the sprites at the same x, y will be deleted. Works on most sprites but not all. Some that can be deleted include decoration sprites, vator ST1's, spike ST1's, and room-over-room view sprites. EXAMPLES: DF in EXAMPLE.MAP SEE ALSO: BREAKABLE (hitag 132) Hitag 143: SECT_ROTATOR TAG2 = Match TAG3 = Type 0 = Manual/Switch/Trigger. If a manual type has a TAG2 value that is not 0 then ALL rotators, vators, spikes, or whatever with the same TAG2 will be operated on. Rotators can be manually operated from on top of sector or alongside of it. A switch resets when the rotator returns to its default position. Trigger operation is the same as a switch but its a floor trigger instead. 1 = Switch/Trigger Only. The rotator cannot be operated manually. All rotator types with the same TAG2 value get operated on. TAG5 = Angle move amount (512 = 90 degrees). Use a negative value to make the sector rotate counter-clockwise. TAG6 = Match at destination. When a rotator reaches its destination it will trigger any event with this match tag. TAG7 = Angle increment. The speed at which the sector rotates. Use an unsigned value. TAG9 = Auto return time in 1/8th of a second resolution. If non-zero then the sector will return to its default position after the allotted time. If TAG9=0 then the sector will remain in the ON position until the SECT_ROTATOR is operated again. BOOL2= 1: Can be operated only once. BOOL4= 0: Can be operated during a WangBang game. 1: Cannot be operated during a WangBang game. BOOL5= 1: Trigger the TAG6 match when moving to the OFF position as well as when moving to the ON position. BOOL6= 0: SECT_ROTATOR cannot be operated again until it's finished moving. 1: Can operate it again while it's moving. BOOL11=1: Displays "Single play only" message when operated in WangBang. Use with BOOL4. SECT_ROTATOR is used primarily to create rotating (swinging) doors, although it has many other potential uses. Any number of red sector walls of any shape can be rotated simultaneously around a single pivot point, defined by SECT_ROTATOR_PIVOT (hitag 144). EXAMPLES: EA in EXAMPLE.MAP SEE ALSO: SECT_ROTATOR_PIVOT (hitag 144), SECT_VATOR (hitag 92), SECT_SPIKE (hitag 106), SECT_SLIDOR (hitag 145). Hitag 144: SECT_ROTATOR_PIVOT TAG2 = Match The CLOSEST SECT_ROTATOR (hitag 143) with same matching TAG2 will rotate about this sprite. EXAMPLES: EA in EXAMPLE.MAP SEE ALSO: SECT_ROTATOR (hitag 143) Hitag 145: SECT_SLIDOR TAG2 = Match TAG3 = Type 0 = Manual/Switch/Trigger - primarily used for manual type. If a manual type has a match tag that is not 0 then ALL slidors with the same match type will be operated on. A slidor can be manually operated from either within the sector, or to the side. With switch operation, the switch resets when the slidor goes to default position. With trigger operation, it's the same as a switch but it's a floor trigger. 1 = Switch/Trigger Only - cannot be operated manually ALL slidors with the same matching tag get operated on by the switch or trigger. TAG5 = Distance to move (largest grid square is 1024). TAG6 = Match at destination. When a slidor reaches its destination it will trigger any event with this match tag. TAG7 = Move speed TAG8 = Acceleration at which slidor approaches TAG7 speed. TAG9 = Auto return time - 1/8th of a second resolution - if non 0 then the slidor will return to its default position after the allotted time. If 0 then it will stay in the ON position until the slidor is operated again. BOOL2= 1: Can only operate the slidor once. BOOL3= 1: Don't crush the player. WARNING: Never let a white walled slidor crush the player, or the game will quit with an error. BOOL4= 0: Slidor can be operated during a WangBang game. 1: Slidor cannot be operated during a WangBang game. BOOL5= 1: Insta-Close(TM) feature. Tired of not being able to run through sliding doors in BUILD 3D mode? Leave them open and let Shadow Warrior close them for you. BOOL5 uses the position of the SECT_SLIDOR sprite to close the doors. BOOL6= 0: Slidor cannot be operated again until it stops moving. 1: Can operate the slidor again while it's in motion. BOOL7= 1: Call the TAG6 match when moving to the OFF position as well as when moving to the ON position. BOOL11=1: Displays "Single play only" message when operated in WangBang. Use with BOOL4. Use SECT_SLIDOR to create sliding or split doors. Several different types can be built, both with red walls and with white walls. Look to the game maps for various examples. IMPORTANT: The walls that form the edges of the door must be tagged properly in order for the slidor to work. If, in 2D mode, the door slides to the left, tag the wall TAG_WALL_SLIDOR_LEFT (walltag 220), if it slides to the right, tag the wall TAG_WALL_SLIDOR_RIGHT (walltag 221), if it slides upwards, tag it TAG_WALL_SLIDOR_TOP (walltag 222), and if it slides downwards, tag it TAG_WALL_SLIDOR_BOTTOM (walltag 223). EXAMPLES: EA in EXAMPLE.MAP SEE ALSO: SECT_ROTATOR (hitag 143), SECT_VATOR (hitag 92), SECT_SPIKE (hitag 106) Hitag 146: SECT_CHANGOR TAG2 = Match TAG4 = New picnum TAG5 = Z adjustment in pixels - can be negative TAG6 = Slope adjustment - can be negative TAG7 = New shade value - can be negative TAG8 = New palette value TAG9 = New visibility value - can be negative BOOL1= 0: Affect the floor 1: Affect the ceiling BOOL2= 1: Do not kill this sprite after using once. By default it is killed after one use. Change attibutes of sector when match code is called. Can be used to create breakable floor or ceiling textures, or other special effects. Most commonly used for shootable lights. EXAMPLES: EB in EXAMPLE.MAP SEE ALSO: SECT_COPY_DEST (hitag 58), SECT_COPY_SOURCE (hitag 59) Hitag 147: SO_DRIVABLE_ATTRIB TAG2 = Angle speed (1 to 16384) 0 provides a default speed TAG3 = Angle "slide" amount (1 to 100) TAG5 = Match triggered when the driveable is operated with the SPACEBAR. TAG6 = Movement speed (1 to 16384) 0 provides a default speed TAG7 = Movement "slide" amount (1 to 100) BOOL1= 1: Don't shake the screen when running into something BOOL2= 1: Trigger match tag TAG5 + 1 when the player presses SPACEBAR to stop driving the sector object BOOL3= 1: Sector object can only be driven from a remote TRIGGER_SECTOR (hitag 140) BOOL4= 1: Rectangular clipping - the outer 504 bounding wall loop of the sector object serves as the clipping box. The wall loop MUST be a 4 wall rectangle. This is the only alternative to the default clipping provided by the operational code. This clipping is better behaved because it never allows the sector object to cross sector lines. This ST1 provides some additional control over the behavior of driveable sector objects. It allows speed and angle velocities to be scaled, and adds momentum with TAG3 and TAG7 to make the driving a little more realistic. Must be placed in the center tagged sector of the sector object. EXAMPLES: EF in EXAMPLES.MAP SEE ALSO: SECT_OPERATIONAL (hitag 1), SECT_SO_DONT_ROTATE (hitag 45), SO_LIMIT_TURN (hitag 68), SO_TURN_SPEED (hitag 55) Hitag 148: WALL_DONT_STICK TAG4 = Point sprite at wall Point this at a wall, and nothing will stick to that wall. This keeps bullet holes, blood, sticky bombs, and so forth from landing on the wall. EXAMPLES: BB in EXAMPLE.MAP Hitag 149: SPAWN_ITEMS TAG2 = Match TAG3 = Item to spawn: 0/32 = Uzi 1 = Red Key 2 = Blue Key 3 = Green Key 4 = Yellow Key 5 = Red Card 6 = Blue Card 7 = Green Card 8 = Yellow Card 9 = Gold Skeleton Key 10 = Silver Skeleton Key 11 = Bronze Skeleton Key 12 = Red Skeleton Key 20 = Uzi for Floor 40 = Repair Kit 41 = Shurikens 42 = Sticky Mines 43 = Rocket Launcher 44 = Rocket Battery 45 = Grenade Launcher 46 = Grenades 47 = Rail Gun 48 = Rail Ammo 51 = Shotgun 52 = Shotgun Ammo 53 = Head 55 = Heart 57 = Gray Armor (can't spawn red armor) 58 = Portable Medkit 59 = Small Medkit 60 = Chem Bomb 61 = Flash Bomb 62 = Nuke 63 = Caltrops 64 = Cookie 65 = Heat seeker card 66 = Cloak 67 = Night Vision 90 = Boy Bunny 91 = Girl Bunny 92 = Random Bunny TAG4 = Angle to throw the item TAG7 = Velocity 0 to 255 Set to 0 and the item stays in place TAG8 = Jump velocity 0 to 255 BOOL1= 0: Kill the ST1 after it's triggered 1: Don't kill after it's triggered BOOL2= 1: Don't spawn another item if a sprite exists in the exact position of the SPAWN_ITEMS sprite. This is used to spawn an item when the TAG2 match is triggered. Used for placing items in trash cans, dropping items from the sky, and any number of cool uses. Flag the ST1 as a Multiplayer only item (F8 menu, option 2), and the item will only spawn during a WangBang game. EXAMPLES: EB in EXAMPLE.MAP SEE ALSO: SPAWN_SPOT (hitag 69) Hitag 150: STOP_SPOUND_SPOT TAG2 = Match TAG5 = Matched sound spot to stop Use this to stop a looping sound when TAG2 is triggered. TAG5 is the TAG2 match tag of the SOUND_SPOT (hitag 134) to be stopped. EXAMPLES: EB in EXAMPLE.MAP SEE ALSO: SOUND_SPOT (hitag 134) Hitag 202: BOUND_FLOOR_BASE_OFFSET TAG2 = Bound Floor # - First one is 0, then 1, 2, etc. All areas with this tag in them set up a new BASE OFFSET to move other areas to. TAG2 is the order in which they are processed. Consider this to be the "anchor" to which BOUND_FLOOR_OFFSET (hitag 203) areas are moved. EXAMPLES: AB, AC, FB, and FC in EXAMPLE.MAP SEE ALSO: BOUND_FLOOR_OFFSET (hitag 203) Hitag 203: BOUND_FLOOR_OFFSET TAG2 = Bound Floor # = First one is 0, then 1, 2, etc. All bound areas with this tag in them are moved to the last BOUND_FLOOR_BASE_OFFSET sprite. "Bound" areas means all sectors that are either directly or indirectly attached to the sector with BOUND_FLOOR_OFFSET in it. This allows you to build stacked sectors separately and let Shadow Warrior overlap them for you. Useful mainly for room-over-room and special dive sector cases. If a sector object is part of a bound floor group, it can have a matching 504 wall loop in the bound floor base group, which will move and behave exactly like the sector object. This is incredibly useful for a variety of effects, like the bottom of a boat in the underwater sector stays with the boat in the upper sector, and so on. EXAMPLES: AD, AE, FE, and FF in EXAMPLE.MAP SEE ALSO: BOUND_FLOOR_BASE_OFFSET (hitag 202) Hitags 500-596: SECT_SO_BOUNDING Bounding sprites for sector objects. Every sector object needs bounding sprites, one in the upper left corner (BOUND_SO_UPPER) and one in the lower right corner (BOUND_SO_LOWER). These two sprites form the opposing points of an imaginary rectangle that must encompass the entire sector object, plus any sprites you want to move with it (like a gun barrel.) You are allowed to have a maximum of 20 sector objects in a level. The BOUND_SO_UPPER sprite hitag of a sector object is calculated as 500 + (5 * sector object #). The BOUND_SO_LOWER sprite hitag of a sector object is calculated as 501 + (5 * sector object #). So, sector object 0 uses BOUND_SO_UPPER 500 and BOUND_SO_LOWER 501. Sector object 1 uses BOUND_SO_UPPER 505 and BOUND_SO_LOWER 506. This goes up in increments of 5 all the way to sector object 19, which uses BOUND_SO_UPPER 595 and BOUND_SO_LOWER 596. EXAMPLES: EC, ED, EE, EF, FA, FB, and FC in EXAMPLE.MAP Hitag 1000: MIRROR_CAM TAG2 = Match tag TAG4 = Angle of camera TAG6 = Camera maximum turn angle from 0-2048. This is the angle from center that the camera will rotate back and forth. (512 = 90 degrees each way for 180 degrees range of motion) TAG7 = Camera look up/down amount. Valid values (5-195). BOOL1= 0: Draw monitor to look like a magic view into another place, looks more like reality. 1: Draw monitor using draw to tile. This makes it look like a TV screen. BOOL2= 0: Don't rotate the camera. 1: Rotate the camera by angle specified in TAG6 from current camera angle. BOOL3= 0: Negative turn direction 1: Positive turn direction BOOL11=When BOOL1 is set to "1": 0: Do normal TV camera view 1: Cycle through all players' views in 5 second increments on this monitor. The camera's view can be displayed in a monitor built using a mirror. Tag the mirror wall with lotag 306 and a hitag equal to the MIRROR_CAM TAG2 match tag. NOTE: Mirrors MUST be built using one way walls, not masked walls or they won't operate. A TV monitor requires a TV monitor sprite (picnums 3830-3837) with a hitag equal to the MIRROR_CAM TAG2 match tag. The TV monitor sprite must be placed in front of a mirror. EXAMPLES: GB and GC in EXAMPLE.MAP Hitag 1002: AMBIENT_SOUND TAG2 = Ambient sound number Plays an ambient sound. Look at the ambient sound index in SWSOUNDS.TXT to find the ambient sound number you want. EXAMPLES: EC and ED in EXAMPLE.MAP SEE ALSO: SOUND_SPOT (hitag 134) Hitag 1005: ECHO_SPOT TAG2 = Reverb setting from 100 - 200 TAG4 = Radius that the reverb effect can be heard Causes all sounds in the area around the ECHO_SPOT to reverb by the amount set in TAG2. Note that there is no reverb available when using a Soundscape. EXAMPLES: $YAMATO.MAP, plus many other game maps Hitag 1006: DRIP_GENERATOR TAG2 = Delay in seconds. If 0, then it uses internally programmed delays (quite fast), otherwise it drips every TAG2 seconds. BOOL1= Drip type 0: Blood drips 1: Water drips BOOL2= 0: Drips 1: No drips, do a bubble instead Used to create a dripping or bubbling spot. The Z height of the ST1 is important, because that's the height where the drip or bubble will spawn. EXAMPLES: AA in EXAMPLE.MAP --------------------------------------- 2. The Shadow Warrior Track Sprite --------------------------------------- Tracks are a powerful feature of Shadow Warrior. Similar to the "Locators" in Duke Nukem 3D, tracks are a series of sprites which determine the path certain game objects can follow. Sector objects, sprite objects, and some actors can follow tracks. 2.1 Meet the Track sprites: You can find the track sprites in the tileset starting at tile 1900 and proceeding all the way up to tile 1999. They are blue numbers counting up from 0 to 99. A single track uses one of these tiles, (i.e. track #0 only uses tile 1900), so this means you can have up to 100 different tracks in a single level. In 2D mode, the sprite will have a sign that reads "T0", "T1", or whatever depending on which track # it is. 2.2 Building a track: Build a track by placing track sprites all along the route you want an object to take. All of the track sprites in a single track use the same tile (i.e. the sprites for track #0 will all use tile 1900). When an object follows a track, it will move in a straight line from one track sprite to the next, then change direction and move in a straight line to the next track sprite. It will do this around the entire track until it reaches the end, then it will head in a straight line back to the start and begin the process all over again. All tracks must loop like this, and a track can never cross its own path. 2.3 Tagging a track sprite: Track sprites only make use of their hitag and lotag. Not all track sprites need a lotag, if you want the object to travel to that point, but don't want to alter its behavior. 2.3.1 Lotag The track sprite's lotag is its "tracktag." It identifies what kind of behavior should occur at that point when an object reaches it while following the track. Different tracktag values allow for changing speeds, bobbing, firing, waiting, and much more. 2.3.2 Hitag The hitag is used to give additional information for those tracktags that need it. For instance, TRACK_SET_SPEED (tracktag 702) uses its hightag as the actual speed value. 2.4 Using a track: Some tracktags only work for sector object, while others only work for actors. Most tracktags work for both sector objects and actors. 2.4.1 Sector and sprite objects To make a sector object (or a sector object tagged as a sprite object) follow a track, just set the sector hitag of the center sector to the number of the track. So if you've got a track #5 in your level, you can make a sector object follow that track by setting the center sector hitag to 5. 2.4.2 Actors Some actors will follow a track, with varying degrees of success. To make an actor follow a track, give the actor sprite a lotag of 30000 + the track number. So to make a green guardian follow track #10, you would give him a lotag of 30010. Angle the actor to the right to make him move in the forward direction (from start to end) or angle the actor to the left to make him move in the backward direction (from end to start.) 2.5 Tracktag function reference: Examples of most of these can be found throughout Shadow Warrior. A few simple tracktags are also demonstrated in EXAMPLE.MAP. Lotag 700: TRACK_START Every track needs a TRACK_START and a TRACK_END (tracktag 701). This is the first sprite on a track, and it marks the beginning. Lotag 701: TRACK_END Every track needs a TRACK_START (tracktag 700) and a TRACK_END. This is the last sprite on a track. When an object encounters this, it loops back to the TRACK_START. Lotag 702: TRACK_SET_SPEED Hitag = Target speed (0 to 128) Set the target speed at this point. Setting the hitag to 0 is a good way to make sure the object stops moving once it reaches this point. (See the boat in $WHIRL.MAP) Lotag 703: TRACK_STOP Hitag = Seconds to stop Object will pause at this point on the track for the number of seconds in the hitag. Lotag 704: TRACK_REVERSE Reverses the object's direction. It will now travel along the track in the opposite direction. Causes some tags to have an opposite effect (e.g. tracktags 705 and 706) Lotag 705: TRACK_SPEED_UP Hitag = Speed offset (0 to 128) Target speed will increase by the amount in the hitag. Lotag 706: TRACK_SLOW_DOWN Hitag = Speed offset (0 to 128) Target speed will decrease by the amount in the hitag. Lotag 707: TRACK_VEL_RATE Hitag = Acceleration (1 to 12, default 6) The rate at which the actual speed approaches the target speed. Lotag 709: TRACK_ZUP Hitag = Pixel amount Moves the floor of the object up by the number of pixels in the hitag. Lotag 710: TRACK_ZDOWN Hitag = Pixel amount Moves the floor of the object down by the number of pixels in the hitag. Lotag 711: TRACK_ZRATE Hitag = Rate Sets the rate at which TRACK_ZUP/TRACK_ZDOWN moves. Defaults to 256. Lotag 712: TRACK_ZDIFF_MODE Hitag = Z offset Special mode where the object looks at the Z-height of the next track point and moves up or down to achieve the destination. In the hitag is a negative delta Z from the placement of the track sprites Z value. Lotag 715: TRACK_SPIN Hitag = Spin speed Object spins clockwise as it goes along its track. Lotag 716: TRACK_SPIN_STOP Hitag = Angle (0 to 2048) Object stops spinning. It will then point in the direction indicated by the hitag. Lotag 717: TRACK_BOB_START Hitag = Pixel height to bob Causes a sector object to start bobbing up and down like a cork. Lotag 718: TRACK_BOB_SPEED Hitag = Speed at which to bob Sets the speed at which a sector object will bob. Lotag 719: TRACK_BOB_STOP The sector object will stop bobbing. Lotag 720: TRACK_SPIN_REVERSE Hitag = Spin speed Object spins counter-clockwise as it goes along its track. Lotag 723: TRACK_SO_SINK Hitag = Speed of sinking Start sector object sinking to ST1 SECT_SO_SINK_DEST (hitag 33). Will sink at the speed in the hitag. Look at the boat in $WHIRL.MAP for an example. Lotag 724: TRACK_SO_FORM_WHIRLPOOL Will cause a sector object to lower the sectors tagged with SECT_SO_FORM_WHIRLPOOL (hitag 37) ST1. Look at the boat in $WHIRL.MAP for an example. Lotag 725: TRACK_MOVE_VERTICAL Hitag = Speed of movement - default is 256 Move sprite objects (not sector objects) straight up or down in the Z direction to the next point's Z height then continue along the track. Lotag 726: TRACK_WAIT_FOR_EVENT Hitag = Match Object will wait at this point on the track for a trigger or switch to be activated. Most types of triggers and switches with the same match tag can be used to free the sector object to continue. Look at the moving crane in $SEABASE.MAP for an example. Lotag 728: TRACK_MATCH_EVERYTHING Hitag = Match When the object or actor reaches this point, it will trigger everything with this match tag. Lotag 729: TRACK_MATCH_EVERYTHING_ONCE Hitag = Match When the object or actor reaches this point, it will trigger everything with this match tag once, and never again. Lotag 751: TRACK_ACTOR_STOP Hitag = Seconds Causes an actor to stop for the number of seconds in the hitag. Lotag 752: TRACK_ACTOR_REVERSE Reverses the actor's direction. It will now travel along the track in the opposite direction. Note that tracktags 753 and 754 will have the opposite effect when traveling the reverse direction Lotag 753: TRACK_ACTOR_SPEED_UP Hitag = Speed offset (0 to 128) The actor's target speed will increase by the amount in the hitag. Lotag 754: TRACK_ACTOR_SLOW_DOWN Hitag = Speed offset (0 to 128) The actor's target speed will decrease by the amount in the hitag. Lotag 755: TRACK_ACTOR_VEL_RATE Hitag = Acceleration (1 to 12, default 6) The rate at which the actor's actual speed approaches the target speed. Lotag 771: TRACK_ACTOR_JUMP Hitag = Height to jump (default 384) Actor will jump. Only works with actors who can jump, like evil ninjas, rippers, and bunnies. Lotag 772: TRACK_ACTOR_CRAWL Causes an actor to crawl. Only works with evil ninjas. Lotag 780: TRACK_ACTOR_CLOSE_ATTACK1 An actor will do his close range attack, like the sword attack in the case of the green guardian. Lotag 782: TRACK_ACTOR_ATTACK1 An actor will do his long range attack, like shooting fireballs in the case of the green guardian. Lotag 791: TRACK_ACTOR_OPERATE Point the track sprite angle in the direction of the operable sector, wall, or switch. Actor will operate the switch, door, or whatever, just like a player pressing SPACEBAR. May only work in certain cases. Lotag 792: TRACK_ACTOR_CLIMB_LADDER The track sprite angle must be facing the ladder. Only evil ninjas can climb ladders. Lotag 799: TRACK_ACTOR_WAIT_FOR_PLAYER Hitag = Range (Largest grid square = 1024) The actor will wait for the player to come into range before moving from this point. Look at the rabbit on the mountain in $SHRINE.MAP for an example of this. ------------------------------- 3. Other Important Sprites ------------------------------- 3.1 Actors: 3.1.1 Hornets (picnum 800) Use a sprite with picnum 800 to place a hornet in your map. 3.1.2 Bouncing Betty (picnum 817) This sprite also comes in voxel (3D sprite) format. This actor is functionally the same as an "Accursed Head." A betty can be tagged to produce different effects. Set the HITAG to these values for the following effects: Hitag 0: Explosion (The betty just explodes) Hitag 1: ChemBombs Lotag = # of chembombs to spawn (max 3, default 2) Hitag 2: Caltrops Lotag = # of caltrops to spawn (max 10, default 5) Hitag 3: Flash effect (blinds the player like a FlashBomb) Hitag 4: Grenades Lotag = # of grenades to spawn (max 10, default 5) 3.1.3 Accursed Head (picnum 820) These are functionally the same as a bouncing betty and can be tagged similarly. (see above) 3.1.4 Sumo Boss (picnum 1210) If you set the sprite's palette to 16, he will be a "mini-boss," which is smaller and less powerful. 3.1.5 Serpent Boss (picnum 1300) If you set the sprite's palette to 16, he will be a "mini-boss," which is smaller and less powerful. 3.1.6 Coolie (picnum 1400) Use a sprite with picnum 1400 to place a coolie in your map. 3.1.7 Coolie Ghost (picnum 1441) Use a sprite with picnum 1441 to place a coolie ghost in your map. 3.1.8 Green Guardian (picnum 1469) Use a sprite with picnum 1469 to place a guardian in your map. 3.1.9 Little Ripper (picnum 1580) If you set the sprite's palette to 7, he will become a big boss ripper. 3.1.10 Fish (picnum 3780) Use a sprite with picnum 3780 to place a fish in your map. 3.1.11 Evil Ninja (picnum 4096) You can set the palette on an Evil Ninja to make him fire different kinds of weaponry. Palette 0: Default. His pants appear blue in BUILD, but will be brown in the game. This ninja throws shurikens. Palette 17: Gray ninja. He's tough and fires grenades. Palette 19: Red ninja. He's tough and fires rockets. Palette 21: Shadow ninja. He's really tough and can fire two kinds of napalm, plus use flash bombs. Palette 24: Orange ninja. Like a red ninja but fires heat seeking rockets. 3.1.12 Crouching Evil Ninja (picnum 4162) This type of ninja stays crouched except to fire at the player. This is great for ducking behind crates and whatnot. His palette can be set just like the regular evil ninja, and he will take on the toughness of that color, but he won't fire the heavy weaponry. 3.1.13 Big Ripper (picnum 4320) If you set the sprite's palette to 7, he will become a big boss ripper. 3.1.14 Bunny (picnum 4550) Bunnies come in three flavors. Set their palette to define which kind the actor is. You can also scale a bunny down to make it younger. It will grow into an adult before mating. Palette 0: Female bunny. Appears blue in BUILD but will be light brown in the game. Palette 17: White bunny. Monty Python style killer rabbit. Palette 24: Male bunny. Orange-brown colored. 3.1.15 Female Warrior (picnum 5162) Use a sprite with picnum 5162 to place a female warrior in your map. 3.1.16 Zilla Boss (picnum 5426) Use a sprite with picnum 5426 to place a Zilla boss in your map. There is no mini-boss version of Zilla. 3.1.17 Leaders And Followers Give an actor a hitag of 1008 and it will be part of a group mentality. If the actor has a lotag of 1, it will be a follower, while if it has a lotag of 2, it will be a leader. Followers will hover around the nearest leader unless the player is within range. This works especially well with rippers and fish. 3.1.18 Spawning Actors With A Trigger Give any actor TAG_SPAWN_ACTOR (lotag 203), and it will not appear in the map immediately when you start out. The hitag of the actor is a match tag. When that match tag is triggered, with a floor trigger or a switch or whatever, the actor will be magically teleported in. 3.2 Cracks (TAG_SPRITE_HIT_MATCH): Any sprite in the game can be given a lotag of 257 and it will then become a TAG_SPRITE_HIT_MATCH. This means that when the sprite is shot by the player, it will trigger any event matched to the hitag of the TAG_SPRITE_HIT_MATCH sprite. By default, the sprite will be invisible, unless it uses picnum 80, in which case it will be visible. Picnum 188 is another crack sprite, designed to be usable on ceilings or floors, but it will still be invisible by default. Here's the info: Lotag 257: TAG_SPRITE_HIT_MATCH Hitag = Match. Can trigger anything. TAG3 = Default is 32. The larger this number, the more sensitive the sprite is to explosion radius. TAG7 = Reacts to ammo type: 0: Default. React only to explosions with radius damage. 1: React only to a direct hit by a weapon with explosive radius. (e.g. Hit it directly with a rocket) 2: React to any explosive weapon or any hitscan weapon (uzis or shotgun). 3: React to any weapon hit, including shurikens, sword, and fist. 4: React only to sector object weapon fire. This means any type of sector object weapon, including machine gun. TAG8 = This is kind of a weird tag. Add the numbers of the effects you want together and put the total in TAG8: +1: Force the sprite to be invisible +2: Force the sprite to be visible +4: Do not kill this sprite when it is hit. Can be triggered over and over again +8: Bouncing a grenade off of the sprite counts as a hit EXAMPLES: Rooms CA and EB in EXAMPLE.MAP. 3.3 Switches: (picnums 551-584) Any sprite can be tagged as a switch, but it will only animate if it's using one of the picnums (551-584). There are several different switch tags, used to activate different types of events. A switch sprite's lotag identifies what kind of switch it is, while its hitag is a match tag to the event you wish to trigger. In most cases a switch will not make a sound. You must place a SOUND_SPOT (hitag 134) ST1 nearby with a TAG2 that matches the switch's hitag. I recommend sound #201 for most switches. Here is a list of the different switch lotags you can use: Lotag 206: TAG_SPRITE_SWITCH_VATOR Hitag = Match This switch is used to activate vators, spikes, rotators, and slidors - basically any kind of door. This is the best switch to use with a door because multiple switches with the same match will animate, and the switch pays attention to auto-closing doors, doors that have a player holding them open, etc. etc. When placing the switch in the BUILD editor, be sure to use the frame that matches the door's starting position. For instance, if BOOL1 is set to "1" on a vator, be sure to use the second frame of a switch, because that door considers itself to be "on." Otherwise, the switch might not animate the first time you operate it. Lotag 210: TAG_LIGHT_SWITCH Hitag = Match This switch can only be used to activate LIGHTING (hitag 108) ST1's, but there's no real good reason to do this, since a TAG_SWITCH_EVERYTHING (lotag 211) will work just as well. It's only included here because you'll find it in several Shadow Warrior maps. Lotag 211: TAG_SWITCH_EVERYTHING Hitag = Match This switch is the one you will use most often, because it can trigger any event in the game. Lotag 212: TAG_SWITCH_EVERYTHING_ONCE Hitag = Match This is the same as TAG_SWITCH_EVERYTHING (lotag 211) in that it can be used to trigger any event, but this switch can only be activated once, and never again. Lotag 213: TAG_COMBO_SWITCH_EVERYTHING Hitag = Match TAG3 = 0: The switch must be off to trigger the event 1: The switch must be on to trigger the event Every COMBO switch in the level with the same hitag must be in the state specified by their TAG3 before the event will be triggered. This switch can trigger any event. COMBO switches make sound automatically, without a SOUND_SPOT (hitag 134) ST1. Lotag 214: TAG_COMBO_SWITCH_EVERYTHING_ONCE Hitag = Match TAG3 = 0: The switch must be off to trigger the event 1: The switch must be on to trigger the event Every COMBO switch in the level with the same hitag must be in the state specified by their TAG3 before the event will be triggered. This switch can trigger any event. COMBO switches make sound automatically, without a SOUND_SPOT (hitag 134) ST1. Once the combo is properly triggered, it can never be triggered again. Lotag 216: TAG_SPAWN_ACTOR_SWITCH Hitag = Match This switch can only be used to spawn actors with a lotag of 203. The actors and the switch must have the same hitag. Lotag 304: TAG_ROTATE_SO_SWITCH Hitag = # of the sector object to rotate Operating this switch causes a sector object to rotate smoothly clockwise 90 degrees. We never found a place to use this in Shadow Warrior, but it's a pretty cool feature nevertheless. This switch has an automatic sound associated with it, and is demonstrated in EXAMPLE.MAP, room FD. 3.3.1 Shootable switch (picnum 577) Switch tile 577 is unique, because it can be shot by the player to activate and deactivate. Don't match this switch to a locked door, though, because the door can be activated by shooting the switch, despite its locked status. 3.3.2 Exit switch (picnum 2470) An exit switch causes the level to end when the player operates it, and the bonus or frag screen is displayed. Any switch can be tagged as an exit switch, but tile 2470 is the graphic that Shadow Warrior usually uses. An exit switch must have a lotag of 116. The hitag specifies which level to go to next, but this only works if the map has the same filename as one of the official Shadow Warrior game maps. For a standard external map, a hitag of 0 will suffice. 3.4 Keys And Keyholes: 3.4.1 Keys (picnums 1765-1779) These are the keys used to unlock doors (ignore the little dog sprites.) You can mix and match key types in a level, but be aware that some keys will overwrite the others in the status bar when the player picks it up. A gold master key will overwrite a red keycard, a silver master key will overwrite a blue keycard, a bronze master key will overwrite a green keycard, and a red master key will overwrite a yellow keycard. 3.4.2 Keyholes (picnums 1846, 1850, and 1852) These are the sprites the player operates to unlock a door with a key. Always set the lotag to 29. Set the hitag equal to the lotag of the SECT_LOCK_DOOR (hitag 29) ST1. The BUILD editor will automatically set the palette of the keyhole when you re-enter 3D mode from 2D mode. Use the correct style of keyhole to match the desired key. 3.5 TV Monitors: (picnums 3830-3837) These sprites are used in conjunction with mirrors and MIRROR_CAM (hitag 1000) ST1. Rotate the monitor sprite flat and place it in front of the mirror, facing out away from the wall. Give it a hitag equal to TAG2 of the MIRROR_CAM. This is only necessary for TV monitors, not for magic monitors. See EXAMPLE.MAP for a demonstration of how to build this. 3.6 QuickJump And QuickJumpDown 3.6.1 QuickJump (picnum 2309) This is a special sector effector. When an actor steps on the QJ sprite, he will jump in the direction the sprite is pointing. This is a good way to get actors to jump up onto ledges, and it looks pretty cool. Only jumping actors (ninjas, bunnies, and rippers) are affected by this. 3.6.2 QuickJumpDown (picnum 2310) This is another special sector effector, similar to QuickJump. When an actor steps on the QJD sprite, he will jump down off a ledge in the direction the sprite is pointing. Make ninjas leap down on the player from high ledges. Only jumping actors (ninjas, bunnies, and rippers) are affected by this. 3.7 Gratings Gratings can be tagged so the player can operate them by pressing the SPACEBAR on them. Point the grating sprite in the direction you want it to move. The lotag must be 200. The hitag is the distance the sprite will move, 1024 is a good distance. This feature may have other applications. 3.8 DeathFlag(tm) Capture the Flag Shadow Warrior has a pretty cool Capture the Flag facility that we didn't really take advantage of in the game. 3.8.1 The Flag Sprite (picnum 2520) HITAG= 0: Default. Flag explodes if carried for longer than 30 seconds, or if carrier dies. The flag respawns every 30 seconds. 1003: Flag carrier must die or score before the flag will respawn back at the base. LOTAG= Match. When the carrier scores with this flag, this match tag will be triggered. Reward a score with free items, trigger a sound, whatever. TAG5 = If non-zero, the match in TAG6 will be triggered when this flag is scored this many times. Make a special reward happen every ten points, or open a secret passage to the exit when the score reaches 25. TAG6 = Secondary match. Used with TAG5. BOOL1= 0: The score is incremented when the carrier enters the score sector. 1: Do not score when entering the score sector. This feature can be used for a flag that you just want to trigger things with, but not score. For example: a map might have a red base and a blue base, and a neutral yellow flag. Teams race to get the yellow flag which when returned to their base, causes the path to the opposing team's flag to open up. PAL: 16: Brown (you must set the flag's palette) 17: Gray 18: Purple 19: Red 20: Yellow 21: Olive 22: Green 23: Blue A level can have multiple flags of any type or color, allowing for a variety of possibilities, including up to eight teams. NOTE: A flag will automatically tag the sector it's in with a sector hitag 9000, and a sector lotag equal to the flag's palette. You can create a scoring sector anywhere in the map in addition to the flag's sector just by using these tags.