Stirling Technologies, Inc.  (c) 1990-1994
SRCDIR
SRCDISK
TARGETDISK
TARGETDIR
WINDIR
WINDISK
WINSYSDIR
WINSYSDISK
ERRORFILENAME	
INFOFILENAME
SUPPORTDIR
CMDLINE
ISVERSION
SHARED
UNINST
ISRES
ISUSERL
LAST_RESULT
CMDVALUE
HINST_INSTALL
BATCH_INSTALL
LOGHANDLE
_sdRECT
right
bottom
_sdSIZE
SelectObject
GetTextExtentPoint
EnableWindow
GetClassName
GetDC
GetDlgItem
GetFocus
GetWindowLong
GetWindowRect
GetWindowWord
IsWindow
IsWindowEnabled
MoveWindow
USER	
ReleaseDC
SetFocus
SetWindowText
ShowWindow
LoadString
KERNEL
GetModuleHandle
GetClientRect
SetWindowPos
PostMessage
ShowCursor
SystemParametersInfo
CreateScalableFontResource
AddFontResource
SOFCPUID
GetProcessorType
AUTOPLAY(
AUTOPLAY (
SOF_LOG_.INI
ProOne CD
80198-5&
ID801985.ID_R&
SofsourceInca
Trigonometrya
1.00a
TRIG.EXE$
Trigonometry$
...Program is already installed...$
Trigonometry$
" is already installed on your system
(you do not need to install it again).  You will find it
in the "$
ProOne CD$
" Group or Folder.
Do you want to REinstall it (install it again)?
...User chose NOT to REinstall the program...quiting....
...User chose to REinstall the program...
PROGRAM\a
ID801985.ID_
PROGFILE.SETb*
*** The Product-ID file is missing from the file set!
The Product-ID file is missing from the file set!A
ID801985.ID_!
*** The Product-ID file name is not correct!
The Product-ID file name is not correct!A
Setup is searching for installed components...A
Setup is searching for installed components...A
Displaying Welcome Dialog...
Welcomea
Welcome Dialog Displayed!
Displaying License Information...$
Please read the following license agreement.  Use the a-
scroll bar to view the rest of the agreement.
Do you accept all the terms of the preceding license a;
agreement?  If so, click on the 'Yes' push-button.  If you $
select 'No', then Setup will close.
Software License Agreementb'
LICENSE.TXT!
     User chose 'Back' Button...,
License Information Displayed!
Asking for Destination Directory...(
ProOneCD\Trig\
ProOneCD\Trig\
Setup will install "a
Trigonometry$
" into the destination listed below.
	*   To install to the specified directory, choose 'Next'.
	*   To install to a different directory, choose 'Browse'.
The directory will be created if it does not already exist.
Specify Installation Destinationb&
     User chose 'Back' Button...,
Specified Destination Directory:  b%
Install To:  "b%
Please Double-Check Setup Informationa
Setting up for file transfer...
Started Recording UNinstall Information...E
ProOne801985DeinstKeyA
Trigonometry
Started File Transfer Operation...?
Unable to create a directory under b
Please check write access to this directory.
ABORTED:  Create Directory Error:  b
     ...Resetting File Transfer Operation...
General file transfer error.a0
Please check your target location and try again.$
 Error Number:$
 Related File: $
ABORTED:  FileSetPerformEz Error!  Return Code:  b&
File Transfer Completed!
Program Files Copied Successfullyd
Setup is activating the new TrueType fonts...A
Setup is activating the new TrueType fonts...A
Creating Program Group/Folder...
Creating Program Folder and Shortcut(s)...,
Creating Program Group and Icon(s)...
Determining the active shell...
  ***WARNING:  Unable to identify shell manager!,
Explorer.EXE(
  ***WARNING:  Shell is NOT Explorer (EXPLORER.EXE).$
               Shell is:  b&
  Shell IS Explorer (EXPLORER.EXE).
PROGMAN.EXE(
PROGMAN.EXE(
  ***WARNING:  Shell is neither Program Manager (PROGMAN.EXE) or Explorer (EXPLORER.EXE).$
               Shell is:  b&
  Shell IS b&
PROGMAN.EXE(
  ***WARNING:  Shell is NOT Program Manager (PROGMAN.EXE).$
               Shell is:  b&
  Shell IS Program Manager (PROGMAN.EXE).
ProOne CD(
Unable to create Program Folder!,
Unable to create Program Group!
Icon(s) will be placed in the current Group.
Group/Folder Created:  b
Adding program icons...!
\TRIG\$
TRIG.EXE
\TRIG\
TRIG.ICO
Trigonometryb
Added Icon:$
   Icon Title:    a
Trigonometry
   Command Line:  b
   Working Dir:   b
   Icon Path:     b 
UNINST16.EXE
Uninstall a
Trigonometry:
Added Icon:$
   Icon Title:    a
Uninstall $
Trigonometry
   Command Line:  b
   Working Dir:   b
   Icon Path:     a
SOFSETUP.LOG
Read Setup Log for a
Trigonometry$
NOTEPAD.EXE b
Added Icon:$
   Icon Title:    a
Read Setup Log for $
Trigonometry
   Command Line:  a
NOTEPAD.EXE $
   Working Dir:   b
   Icon Path:     a
Finishing the install process...
Some files could not be installed because they are
currently in use by other programs in the system.
These files will be updated when you restart Windows.
To ensure proper operation of your new
program you should restart Windows now.
Shared files need committing!
--- Setup Ended With Reboot Required ---
Remove any diskettes from their drives, then click a%
Finish to complete the Setup process.
Setup Almost Completeb&
*** User declined to reboot system at this time! ***
Setup is complete.  You may run the installed program
by selecting it from the Start Programs menu.
Setup is complete.  You may run the installed
program by double-clicking on it's program icon.
Please be sure to insert this CD-ROM disc in
your CD-ROM drive before starting the program.
You will ALWAYS need the CD-ROM disc to run the program.
--- Setup Ended Normally ---
INFO(
INFO (
Program Information:
	Product Line:  $
ProOne CD$
	Program Name:  $
Trigonometry$
	Program Ver:   $
1.00$
	Program UPC:   $
80198-5
LOG (
Setup Information is being recorded in:
SOFSETUP.LOG
SOFSETUP.LOG
Setup Information Log File
SETUP.EXE Version b
Product Line:     "a	
ProOne CD$
Program Name:     "a
Trigonometry$
Program Version:  "a
1.00$
UPC Code:         "a
80198-5$
Screen Caption:   "a
ProOne CD "Trigonometry"$
Program Group/Folder:      "a	
ProOne CD$
Default Path Windows 3.x:  "a
ProOneCD\Trig\$
Default Path Windows 95:   "a
ProOneCD\Trig\$
Predefined Variables:$
   CMDLINE:     "b
   SRCDIR:      "b
   SRCDISK:     "b
   SUPPORTDIR:  "b
   WINDIR:      "b
   WINDISK:     "b
   WINSYSDIR:   "b
   WINSYSDISK:  "b
Program logged as currently installed in:  b
Program not logged as currently installed.
SetupScreen() - ENTERING...
ProOne CDa
          $
Trigonometry
ProOne CD "Trigonometry"a
 Setup
SetupScreen() - LEAVING.
CheckRequirements() - ENTERING...
Screen Resolution Width x Height:  b
ABORTED:  Non-VGA resolution!
This program requires VGA or better resolution.A
ABORTED:  Unable to identify Operating System!
Unable to identify Operating System.A
Operating System Detected:)
  Windows 3.x,
  Windows 3.x + WIN32S,
  Windows 95,
  Windows NT,
  NOT Microsoft Windows...!
    Windows Version b
    Running in 'Enhanced' Mode.,
    Running in 'Standard' Mode.
    DOS Version     b
ABORTED:  Requires Windows 3.10 or higher!
Sorry, this program requires
Microsoft Windows 3.10 or higher.A
Unable to determine CPU type.,
Unknown%
SOFCPUID.DLL
80286 or compatible!
80386 or compatible!
80486 or compatible!
Pentium or compatible!
ALPHA!
MIPS!
PowerPC!
Unknown,
8088 or compatible,
8086 or compatible,
80286 or compatible,
80386 or compatible,
80486 or compatible,
Pentium or compatible,
Pentium or compatible,
ALPHA,
MIPS,
PowerPC
Installed CPU is:  b
Aborted:  Requires 80286 or higher CPU.
This program requires an 80286 or higher processor !A
CheckRequirements() - LEAVING.
DiskSpaceOK() - ENTERING...!
PROGRAM\b
PROGFILE.SETb*
  already on system:  b*
Raw space requirements for Program Files:         b&
Calculated space requirements for Program Files:  b&
Important Information:A
        Drive "b
" may not have enough free space available to complete
        the installation.  Please consider freeing some disk space byA
        deleting unnecessary files, or choosing a different destinationA
        drive.  If you believe there is enough space available (such asA
        when REinstalling over a previous copy) then you can continueA
        the installation as specified.A
*** There may not be enough free space on drive b
 for the program and shared files...
Important Information:A
        Drive "b
" may not have enough free space available to complete
        the installation.  Please consider freeing some disk space byA
        deleting unnecessary files, or choosing a different destinationA
        drive.  If you believe there is enough space available (such asA
        when REinstalling over a previous copy) then you can continueA
        the installation as specified.A
*** There may not be enough free space on drive b
 for the program files...
"   NOTE:
        Drive "b
" may not have enough free space available to install
        the shared files.  Please consider freeing  some disk space byA
        deleting unnecessary files.A
*** There may not be enough free space on drive b
 for the shared files...
DiskSpaceOK() - LEAVING.
Determining file set components...
PROGFILE.SETa
TRUETYPE\*.TTFBC
  No TrueType components.,
  No TrueType components.,
  Has TrueType components!
PROGFILE.SETa	
WINDR\*.*BC
  No WINDOWS directory components.,
  No WINDOWS directory components.,
  Has WINDOWS directory components!
PROGFILE.SETa
WINSYSDR\*.*BC
  No WINDOWS\SYSTEM directory components.,
  No WINDOWS\SYSTEM directory components.,
  Has WINDOWS\SYSTEM directory components!
File set components determined!
Determining Windows-drive space requirements...!
PROGFILE.SETa	
WINDR\*.*BD
PROGFILE.SETa	
WINDR\*.*B
*Unable to determine WINDOWS directory space requirements!,
WINDR\b
PROGFILE.SETb*
  already on system:  b*
PROGFILE.SETa
WINSYSDR\*.*BD
PROGFILE.SETa
WINSYSDR\*.*B
*Unable to determine WINDOWSSYSTEM directory space requirements!,
WINSYSDR\b
PROGFILE.SETb*
  already on system:  b*
PROGFILE.SETa
TRUETYPE\*.*BD
PROGFILE.SETa
TRUETYPE\*.*B
*Unable to determine TrueType space requirements!,
WINSYSDR\b
PROGFILE.SETb*
  already on system:  b*
PROGFILE.SETa
PROGRAM\*.*BC
PROGFILE.SETa
PROGRAM\*.*B?
*Unable to determine WINDOWS directory space requirements!!
  Space Requirements (drive containing Windows):n
    Windows\ directory:              b
    Windows\System\ directory:      b
    TrueType Files:                   b
    Total Windows\System directory:  b
    Total for Windows Drive:          b
Nominal Windows-drive space requirements determined!
Standard FileSet discarded successfully.,
Unable to discard Standard FileSet!
ProgramFiles
Defining the standard FileSet...
Copying program files...
PROGFILE.SETa
PROGRAM\*.*BC
Program(
PROGFILE.SETa	
WINDR\*.*BC
Win Shared
PROGFILE.SETa
WINSYSDR\*.*BC
WinSys Shared
WINSYSDR\b
PROGFILE.SETb*
Special Case Shared
Copying TrueType Fonts...
PROGFILE.SETa
TRUETYPE\*.*BD
TrueType
Standard FileSet Defined.!
Performing Windows Directory Sanity-Check...
PROGFILE.SETa
WINSYSDR\*.*B
Examining:  b
  Present in WIN dir but not SYS dir.
  *Error copying b*
 to %
  File will be updated in both WIN and SYS dirs.,
  Attempting to delete:  b*
  File will be updated in both WIN and SYS dirs.
  Present in both WIN dir and SYS dir.
  File in WIN dir has no version info, will be simulated...|
0.0.0.0,
0.0.0.0,
0.0.0.0,
  File in SYS dir has no version info, will be simulated...|
0.0.0.0,
0.0.0.0,
0.0.0.0,
WINSYSDR\b
PROGFILE.SETb*
  Program file has no version info, will be simulated...$
WINSYSDR\b
PROGFILE.SETb*
0.0.0.0,
0.0.0.0,
0.0.0.0,
    Version in WIN dir:  b
    Version in SYS dir:  b
    Version in Program:  b
  Version in WIN <= Version in SYS...|
  Attempting to delete:  b*
  Unable to delete from WIN dir...
  Version in SYS <= Program version...!
  Version in SYS > Program version...$
Warning:  There are two different versions of the same file
present on your system.  Setup is unable to delete the older
version because it is currently in use by another program.
After Setup is complete, please exit from Windows and delete
the following file:  "$
Deleting that file will ensure proper operation of Windows.
  ***User must manually delete file from WIN dir!
  Program version >= WIN version...|
  Attempting to delete:  b*
  File will be updated in both WIN and SYS dirs.
  WIN version > SYS and Program versions...|
  Attempting to delete:  b*
  Newest version will be present in both WIN and SYS dirs.
Completed Windows Directory Sanity-Check...!
Activating New TrueType Fonts...
PROGFILE.SETa
TRUETYPE\*.TTFB
Error:  Unable to activate the new TrueType fonts.
Error:  Unable to activate the new TrueType fonts.A
WIN.INI
fonts
 (TrueType)
TrueType Font already present (b
Installing TrueType Font (b
) ...
   szpIniFileName:  b
   szpSectionName:  b
   szpKeyName:      b
   szpNameFOT:      b
   szpNameTTF:      b
*Error in CreateScalableFontResource (b
Error:  Unable to activate b
*Error:  Unable to update WIN.INI file.$
    szpIniFileName:  b
    szpSectionName:  b
    szpKeyName:      b
    szpNameFOT:      b
Error:  Unable to activate b
*Error in AddFontResource (b
Error:  Unable to activate b
SOFSETUP.LOG
 FileSet CompressGet failed!
edit(
SETUPSTR862R*
Disk Space0
temp.txt
temp.txt
In function '%s':
Unable to create dialog.
Make sure the _ISRES.DLL is in _SETUP.LIB.
Errorb+
_sdSIZEa
%s-%ldb
SdRegisterUserEx!
ResultA
szNameA
szCompanyA
szSerialA
SdRegisterUserEx!
szNameA
szCompanyA
szSerialA
ResultA
SdRegisterUser!
ResultA
szNameA
szCompanyA
SdRegisterUser!
szNameA
szCompanyA
ResultA
SdConfirmRegistration!
ResultA
SdConfirmRegistration!
ResultA
SdConfirmNewDir!
ResultA
SdConfirmNewDir!
ResultA
SdAskDestPath!
ResultA
szDirA
SdAskDestPath!
szDirA
ResultA
SdWelcome!
ResultA
SdWelcome!
ResultA
SdShowInfoList!
ResultA
SdShowInfoList!
ResultA
SdSelectFolder!
ResultA
szFolderA
SdSelectFolder!
szFolderA
ResultA
SdSetupType!
ResultA
szDirA
SdSetupType!
szDirA
ResultA
SdShowAnyDialog!
ResultA
SdShowAnyDialog!
ResultA
SdDisplayTopics!
ResultA
SdDisplayTopics!
ResultA
SdShowMsg!
SdShowMsg/
_sdRECTa
_sdRECTa
bottom2
SdAskOptionsList!
ResultA
ComponentA
SdAskOptionsList!
ComponentA
ResultA
SdShowFileMods!
ResultA
nSelectionA
SdShowFileMods!
nSelectionA
ResultA
SdShowDlgEdit1!
ResultA
szEdit1A
SdShowEdit1!
szEdit1A
ResultA
SdShowDlgEdit2!
ResultA
szEdit1A
szEdit2A
SdShowEdit2!
szEdit1A
szEdit2A
ResultA
SdShowDlgEdit3!
ResultA
szEdit1A
szEdit2A
szEdit3A
SdShowEdit3!
szEdit1A
szEdit2A
szEdit3A
ResultA
SdAskOptions!
ResultA
ComponentA
SdAskOptions!
ComponentA
ResultA
SdComponentDialogAdv!
ResultA
ComponentA
szDirA
SdComponentDialogAdv!
szDirA
ComponentA
ResultA
SdComponentMult!
ResultA
ComponentA
SdComponentMult!
ComponentA
ResultA
SdOptionsButtons!
ResultA
SdOptionsButtons!
ResultA
SdBitmap!
ResultA
SdBitmap!
ResultA
SdComponentDialog2!
ResultA
ComponentA
SdComponentDialog2!
ComponentA
ResultA
SdComponentDialogEx
SdComponentDialogEx!
SdComponentDialog!
ResultA
ComponentA
szDirA
SdComponentDialog!
szDirA
ComponentA
ResultA
SdLicense!
ResultA
ResultA
SdStartCopy!
ResultA
ResultA
SdFinishReboot!
ResultA
BootOptionA
ResultA
BootOptionA
ResultA
ResultA
BootOptionA
SdFinish!
ResultA
bOpt1A
bOpt2A
ResultA
bOpt1A
bOpt2A
_EWQ6
_MRQB!
3.00.069