!! NEW IN VERSION 1.5 !! The alarm sounds an alarm in addition to displaying one. !! NEW IN VERSION 1.02 !! Each clock has been seperated using a panel box. The 640x800 or 64 pixelsperinch resolution problem has been fixed. -------------------------------------------------------------- To see if there is a hint on a particular button or display, point at it with the mouse for 6 seconds. In the first section (Alarm) Sometimes I just want a simple alarm which will tell me a certain time has come. Browsing the Internet can consume time quickly. Enabled - This refers to the mechanism which tells the computer weather or not to check the time so the program will know if to alarm. Checked means On Alarm - Use the two arrows to set the hour and the minute in which you want the program to alarm. Please note that the minute hand will display only one digit when the value is less than 10. Please note that the alarm is geared to operate from the minute position. This means that the alarm will not sound on a particular second within a minute but it should alarm within that minute. Message - Type the message you want to see when the alarm goes off. In the second section (Stop Watch) Want to know how long it takes you to complete a game of solitaire or a level in a game? *The Stop watch is 97.97% accurate on my computer. This means that for every full minute, my stop watch may be .4 seconds off the real time. This time could vary depending on computer. Lap - If the stop watch is running and you want to record a particular time while the clock is still running, click this button and that time will be displayed in one of three lap boxes. Reset - Clear all of the Lap Boxes and reset the counter to all zero's In the third section (count down) There is a good place on the web were this can be useful. Http://cech.cesnet.cz/IQ/IQ-test-e.html Reset - Resets the counter to the value defined by set. Set - Once you select a time in the count down box you press this button so that the counter will remember the time. Message - What do you want to see when the counter reaches zero? Counter's will not display double digits if the value is less than 10. All refrence's to sound are plan funny since this program does not have any. It may develop sound in the future, but it only a display modal at this point.