═══ 1. Help for OK ═══ Select OK to send any changed information to the program and close the window. ═══ 2. Help for Cancel ═══ Select Cancel if you decide not to change the current settings. ═══ 3. Help for Reset ═══ Select Reset to change the settings to those that were active before this window was displayed. ═══ printer driver ═══ A file that provides device-independence. This file describes the physical characteristics of a printer, plotter, or other peripheral device, and is used to convert graphics into device-specific data at the time of printing or plotting. ═══ 4. IBM Trademarks ═══ Trademark of the IBM Corporation ═══ 5. Non-IBM Trademarks ═══ The following terms, denoted by a double asterisk (**) in this information, are trademarks of other companies as follows: AST is a trademark of AST Research, Incorporated. Adobe is a trademark of Adobe Systems Incorporated. Adobe Type Manager is a trademark of Adobe Systems Incorporated. Digital Research is a trademark of Digital Research, Inc. Epson is a trademark of Seiko Epson Kabushiki Kaisha. Excel is a trademark of Microsoft Corporation. Helvetica is a trademark of the Linotype Company. HP and Hewlett-Packard are trademarks of Hewlett-Packard Company. Intel is a trademark of Intel Corporation. LaserJet is a trademark of Hewlett-Packard Company. Lotus is a trademark of Lotus Development Corporation. Microsoft is a trademark of Microsoft Corporation. PostScript is a trademark of Adobe Systems Incorporated. Times New Roman is a trademark of the Monotype Corporation, Ltd. Windows is a trademark of Microsoft Corporation. ═══ 6. Help for Keys ═══ The list of keys is arranged in groups. Use: o HELP KEYS to get help o SYSTEM KEYS to switch between programs o WINDOW KEYS to move around in a program window o POP-UP WINDOW KEYS to make a selection in a pop-up window o EDITING KEYS to make changes in a pop-up window. When two key names are joined by a plus sign (+), use these two keys together. Hold down the first key and press the second key. HELP KEYS F1 Get help F2 Get extended help (from within any help window) F9 Go to a list of keys (from within any help window) F11 or Alt+F1 Go to the help index (from within any help window) Esc Cancel help Alt+F4 Close the help window Alt+F6 Go to/from help and programs Shift+F10 Get help for help SYSTEM KEYS Alt+Esc Switch to the next program, including full-screen programs Alt+Tab Switch to the next windowed program Ctrl+Esc Switch to the Task List WINDOW KEYS F3 Close a program window F10 Go to/from the action bar Arrow keys Move among choices End Go to the last choice in a pull-down Esc Cancel a pull-down or the system menu Home Go to the first choice in a pull-down PgUp Scroll the contents of the window up one page PgDn Scroll the contents of the window down one page Underlined letter Move among the choices on the action bar and pull-downs Alt Go to/from the action bar Alt+F4 Close the window Alt+F5 Restore the window Alt+F7 Move the window Alt+F8 Size the window Alt+F9 Minimize the window Alt+F10 Maximize the window Ctrl+PgDn Scroll the contents of the window right one page Ctrl+PgUp Scroll the contents of the window left one page Shift+Esc or Alt+Spacebar Go to/from the system menu Shift+Esc or Alt Go to/from the system menu of a text window POP-UP WINDOW KEYS Enter Complete the pop-up window Esc Cancel the pop-up window Spacebar Set a check box on/off or perform the task described on the selected pushbutton Tab Move to the next entry field or check box EDITING KEYS Backspace (left arrow delete) Delete the character to the left of the cursor Del Delete the character to the right of the cursor End or Ctrl+Right Arrow key Move to the end of a field Home or Ctrl+Left Arrow key Move to the beginning of a field ═══ 7. HP LaserJet and HP LaserJet-Compatible Printers ═══ The LASERJET.DRV supports HP LaserJet** printers using Printer Control Language (PCL), and three device font types: o Your printer is shipped with one or more internal fonts, which are fonts permanently stored in its memory. When you indicate printer model during installation, you automatically set up these fonts. o You can purchase cartridge fonts, (fonts that have additional character shapes, alphabets, or graphic character sets) in a package that fits into a slot on your printer. The cartridge provides additional memory to the printer, with the font shapes already loaded. o Some cartridges include extended fonts, that enable you to print characters (for example, bar codes) that are not included in the character sets supplied with your operating system. o Soft fonts are optional fonts shipped as files. Some fonts have predetermined sizes, and some can be scaled to size from within a program. At the time of printing, the fonts selected for a print job are downloaded, or copied, to the memory of your printer. The capacity of printer memory determines the number of different fonts you can select for downloading with a particular print job. To take advantage of fonts: 1. The device drivers that come with your OS/2* system contain a list of cartridge names catalogued by the printer manufacturer. If you have a cartridge, and want to install its fonts, display the Printer Properties window for the driver, then select Fonts. Installing entails adding font names to the list of Installed fonts in the Font Installer window. If you purchase fonts separately, the font manufacturer might supply a separate installation program that you must run before you can add fonts in the Font Installer window. 2. Exiting the Font Installer window re-displays the Printer Properties window. In the Printer Properties window, you mark as active, any cartridge loaded into a printer slot. Your printer might have one or more cartridge slots. 3. Select the fonts for a particular job from within your program. You can mix internal, cartridge, and downloadable fonts in any print job. Related information: o Installing Hewlett-Packard AutoFont support o Font symbol sets ═══ 8. Installing Hewlett-Packard AutoFont Support ═══ The AutoFont support files provided with Hewlett-Packard** typeface diskettes and cartridges contain information needed to install the typefaces. 1. Using DOS, run the AutoFont Support Installation program (or the Type Director 2.0 program). Make note of the directory into which the program installs its diskette files. 2. Display the Printer Properties window for the driver; then select Fonts. 3. In the New font directory field, type the name of the directory containing the AutoFont Support files. For more information on typefaces and AutoFont support files, consult the Hewlett-Packard documentation. ═══ 9. Font Symbol Sets ═══ A symbol set determines a mapping between the machine-readable value of a character and the font in which it is printed. When installing Hewlett-Packard** fonts for laser printers, the New soft fonts, New cartridge fonts, and Installed fonts fields list symbol sets by using the following abbreviations: US ASCII R8 Roman 8, US ASCII, plus additional European characters PM Symbols map one to one with code-page 850 PC PC-8, corresponding with code-page 437 PD PC-8DN Danish and Norwegian code-page 437N DT Desktop, US ASCII plus additional useful symbols. E1 ECMA-94 Latin 1 E5 ECMA-128 Latin 5 WN Windows VI Ventura International VU Ventura US RX Roman Extension O1 OEM-1 U2 ISO 2: International number 2 UK ISO 4: UK ISO S3 ISO 10: Swedish SW ISO 11: Swedish JS ISO 14: JIS ASCII IT ISO 15: Italian S4 ISO 16: Portugese SP ISO 17: Spanish GR ISO 21: German F0 ISO 25: French CH ISO 57: Chinese DN ISO 60: Danish and Norwegian NW ISO 61: Norwegian V2 FR ISO 69: French S5 ISO 84: Portugese S6 ISO 85: Spanish G0 HP German S1 HP Spanish If your cartridge has additional (extended) symbol sets, you can list them by selecting the Extended symbol sets for cartridges check box. A window appears in which the extended symbol sets on your cartridge are identified with their own abbreviations. For example: M8 Antique Olive D1, DS, DV ITC Zapf Dingbats ═══ directory ═══ A table of identifiers and references to the corresponding items of data. For example, a listing of the files stored on a diskette. ═══ install ═══ To copy software components from distribution media to specified areas (directories) of a hard disk. ═══ device font ═══ A font particular to the printer. Some device fonts have size and language-support restrictions. Printer device fonts are internal to the printer hardware. They can be installed on a card or downloaded to printer memory. They are printed faster than system fonts. See also system font. ═══ system font ═══ One of the fonts available for screen display and printing. You can specify any size for this font, and it supports any language. Contrast with device font. ═══ check box ═══ A square box with associated text that represents one choice in a set of multiple choices. When you select a choice, a check mark appears in the check box to indicate that the choice is in effect. You can clear the check box by selecting the choice again. Contrast with radio button. ═══ check mark ═══ A symbol that shows that a choice is currently active. This symbol is used in menus and check boxes. See check box. ═══ font ═══ A family of characters of a given size and style; for example, 9-point Helvetica. ═══ spooler ═══ A program that puts print jobs on one or more queues and removes a print job from a queue to send the job to a printer. ═══ extended fonts ═══ Fonts containing characters that are not included in the Presentation Manager* character set. For example, you can purchase extended fonts called dingbats, which include large check marks and other graphics that represent bullets on charts. Bar code symbols, such as those used by the post office to sort zip codes, are also available as extended fonts. ═══ 10. Help for Font Installer ═══ Use this window to determine which fonts are available for selection from your programs and to add fonts as you purchase or need them. The Available fonts field lists the name of any cartridge font or soft font already installed. To install new fonts: 1. Insert your font diskette into drive A. 2. Select Open. 3. Select the fonts you want to add in the New soft fonts or the New cartridges field. 4. If the cartridge has extended fonts, you can select the Extended symbol sets for cartridges to list them. A window appears. 5. If the Extended Symbol Set Support window appears, select the extended fonts you want, and then select the OK push button. 6. Select Add. Selecting Delete allows you to delete unnecessary fonts. For a detailed explanation of each field, select from the list below: o Installed Fonts o New Font Directory o New Soft Fonts o New Cartridges o Extended Symbol Sets for Cartridges o OK o Open o Add o Delete Related Information: o HP LaserJet and HP LaserJet-compatible printers o Installing Hewlett-Packard AutoFont support ═══ 11. Help for Installed Fonts ═══ This list contains the names of those cartridges and soft fonts currently installed. You can scroll the list vertically to see more fonts, or horizontally to see the complete description of fonts with long identifiers. The at sign (@) precedes the name of each cartridge. The list identifies cartridge fonts by cartridge letter and font name. For soft fonts, the list shows symbol set and orientation. A greater than symbol (>) marks a font that is currently in use by a program. You cannot delete a font marked by >. Related Information: Font symbol sets ═══ 12. Help for New Font Directory ═══ Use this field to indicate the location of font files you want to install. Usually, you install new font names from a list on a diskette, so the field contains the initial value A:\. You can type a different path ═══ 13. Help for New Soft Fonts ═══ This field displays the names of fonts stored in the New font directory. To fill the list: 1. Insert the appropriate diskette in drive A, or fill in the New font directory field with the location of the fonts on your hard disk. 2. Select Open. You can scroll the list to see more fonts. Select any fonts you want to install, then select Add to add the selected fonts to the Installed fonts field. Related Information: o Installing Hewlett-Packard AutoFont support o Font symbol sets ═══ 14. Help for New Cartridges ═══ This field displays the names of cartridge fonts you can add to the Installed fonts field. All known cartridge fonts are listed on the device driver diskettes that come with your OS/2* system. If you purchase new fonts, the cartridge names are listed on the diskettes that come with your cartridge. To fill the list: 1. Insert the appropriate diskette in drive A. 2. Select Open. You can scroll the list to see more cartridge fonts. ═══ 15. Help for Extended Symbol Sets for Cartridges ═══ Select Extended symbol sets for cartridges if you want to select extended fonts from a cartridge. If you are adding a cartridge that does not have extended fonts, and this field has a check mark in it, deselect the field. ═══ 16. Help for Open ═══ Select Open to read font names from the drive and directory identified in the New font directory field. ═══ 17. Help for Add ═══ Select Add to add selected New soft fonts or New cartridges to the Installed fonts field. If you selected Extended symbol sets for cartridges, and your cartridge has extended fonts, a window appears from which you select the extended symbol sets you want to use. If your cartridge does not have extended fonts, and Extended symbol sets for cartridges is selected, a message appears that indicates there are no extended fonts. Select OK to continue installing your standard fonts. ═══ 18. Help for Delete ═══ Select Delete to remove selected font names from the Installed fonts list. ═══ 19. Help for Font Installer - Extended Symbol Set Support ═══ Use the Font Installer - Extended Symbol Set Support window to select any extended fonts you want to use from the cartridge identified at the top of the window. 1. Select one or more typefaces in the Available typefaces field. The Extended symbol sets field lists all the extended symbol sets available for the selected typefaces. 2. Select one or more extended symbol sets. 3. Select OK. Related Information: Font symbol sets ═══ 20. Help for Available Typefaces ═══ This field lists all the typefaces (for example, Helvetica, Line Printer) available on the cartridge you selected in the Font Installer window. Select from the Available typefaces list those typefaces for which you want to add extended fonts. ═══ 21. Help for Extended Symbol Sets ═══ This field lists all the extended fonts included on your cartridge for the typefaces you selected in the Available typefaces field. Each extended symbol set has an abbreviation that identifies it, followed by a short description. Consult the documentation included with your cartridge, if you want to see a picture of a particular symbol set identified in the list. Select one or more symbol sets, then select OK to continue installing your cartridge. ═══ hard disk ═══ A rigid disk in a hard disk drive that you cannot remove. The hard disk can be partitioned into storage areas of variable sizes that are subdivided into directories and subdirectories. See also partition. ═══ partition ═══ A fixed-size division of storage. On an IBM personal computer hard disk, one of four possible storage areas of variable size; one might be accessed by DOS, and each of the others might be assigned to another operating system. ═══ path ═══ A statement that indicates where a file is stored on a particular drive. The path consists of all the directories that must be opened to get to a particular file. The directory names are separated by the backslash (\). The first backslash represents the root directory. For example, a file named things that is located in the EDIT directory of drive C has a path of: c:\edit\things A path is sometimes followed by a file name and a file name extension (if there is one). It is sometimes preceded by a drive letter and a colon (:). ═══ 22. Help for Printer Properties of HP LaserJet ═══ The heading of the Printer Properties window identifies the model HP LaserJet** or compatible printer you have selected. Use the fields in this window to indicate the form loaded in each tray of your laser printer, and any font cartridges inserted in the printer. The push buttons give access to other properties windows which you use to define additional forms, and to identify fonts you have purchased for your printer. For a detailed explanation of each field, select from the list below: o Paper source o Active cartridges o Help for Memory o Help for Page Protection o Help for PostScript Cartridge Plus o Help for Environment Savings o Fonts o Forms o Defaults o Cancel o OK Related information: HP LaserJet and HP LaserJet-compatible printers ═══ 23. Help for Paper Source ═══ This field provides a place to assign forms to each tray your printer accommodates. Thus, if your printer has two trays, Upper and Lower appear here. If you use different size paper, envelopes, or preprinted special forms in one or more of your paper trays, you can specify a different paper form for each tray. Each tray has a form field with the currently selected form displayed. 1. Select the arrow to the right of the form field to see the list of available forms. 2. Select the form you want. You can scroll the list to see more forms. You can add more forms to the list by selecting the Forms push button at the bottom of the window. ═══ 24. Help for Active Cartridges ═══ This list contains the names of installed cartridge fonts. Select from the list any cartridges currently inserted in the printer. Because some laser printers have more than one cartridge slot, Max. = indicates the total number of cartridges you can select. If you attempt to select more than that maximum, the next cartridge name you select replaces the first one selected, and you hear a warning tone. If you have a cartridge that is not listed, select the Fonts push button; a window appears that enables you to add your cartridge to the list. ═══ 25. Help for Memory ═══ Enter the total amount of memory installed in your printer. The printer Self Test page indicates the amount of memory installed. Choose a memory amount in kilobytes. Total memory includes standard memory plus the memory on expansion cards, if any. If you are unsure about this value, run the printer Self Test to display the amount of installed memory. Setting the correct memory value ensures optimum performance from the printer and the driver. ═══ 26. Help for Page Protection ═══ This list contains the possible types of Page Protection for this printer. Select the level of page protection (OFF, LTR, A4, or LGL) that you set on your printer. The current value for page protection appears on the Self Test page of the printer. Use the printer front control panel to change the value for page protection, then update this dialog with the new value. For LaserJet III printers, two MB of printer memory is necessary to set page protection to LTR or A4. Three MB of memory is necessary for LGL. For LaserJet 4 printers, six MB of printer memory is necessary to set page protection to LTR, A4, or LGL when printing at at 600 DPI. Note: On Laserjet 4 printers with two MB of memory, page protection settings of LTR, A4 or LGL will cause the printer to automatically change its resolution to 300 DPI. This can cause incorrect output. If this happens, turn page protect OFF on the printer control panel or add more memory to the printer. The default setting on the printer is page protection OFF. ═══ 27. Help for PostScript Cartridge Plus ═══ The PostScript Cartridge Plus option enables a printer to accept a PostScript data stream. If this option is installed in your printer, enable this checkbox to send the correct initialization strings to the printer for the PCL language. To print in PostScript mode, the OS/2 PostScript driver must be installed and selected. ═══ 28. Help for Defaults ═══ Select Defaults for an opportunity to specify number of copies, orientation, resolution, choice of form, paper feed, duplex printing, and fast (downloaded) system fonts. These default choices are used if you do not specify these types of job properties for a particular print job or for the queue to which you submit that job. ═══ 29. Help for Fonts ═══ Select Fonts for access to the Font Installer window. You can then view a list of currently installed soft fonts and cartridge fonts, or you can add fonts to those listed as installed. ═══ 30. Help for Forms ═══ Select Forms to add forms to those listed for each paper tray. Add a form if the defined forms do not include a paper size that matches the paper loaded in your printer. You can also add a form to assign a unique name to a preprinted form, even if it conforms to a size already defined. ═══ 31. Help for Environment Savings ═══ The Environment Savings items are enabled when the Postscript language option is installed and there is sufficient memory to support it. If you change the values of Environment Savings for PCL and/or Postscript on the front panel of the printer, then update this dialog to reflect those changes. ═══ 32. Help for LaserJet Job Properties ═══ Use Job Properties to request multiple copies, specify orientation, resolution, and elect to download system fonts. You can select a tray-loaded form or indicate that you will feed forms by hand, and specify output bin if your printer has more than one place for holding printed pages. You also can select dual-sided printing for printer models offering this feature. Some programs provide access to this window, enabling you to assign these job properties for a specific document or template. When setting up a queue, you select job property defaults that take effect if the program does not override them. For a detailed explanation of each field, select from the list below: o Copies o Orientation o Resolution o Fast system fonts o Printer patterns o HP-GL/2 o Large buffers o Form o First page o Remaining pages o RET o Economode o ImageAdapt o Paper feed. o 1 or 2 sided printing o Output bin o Effects o OK ═══ 33. Help for Copies ═══ In this field, type the number of copies of each page you want printed. ═══ 34. Help for Orientation ═══ Select Portrait (upright) to print the top of the printed material in the same direction as the top of the paper. Letters, books, and reports usually have portrait orientation. Select Landscape (rotated) to print perpendicular to the direction in which the paper is fed. Landscape is frequently selected for documents such as spreadsheets or plotted graphics, which are wider than they are long. ═══ 35. Help for Resolution ═══ Select the number, in dots-per-inch (dpi) increments, that represents the resolution in which you want graphics produced on your printer. Laser printers process device fonts in the highest available resolution, and can mix high resolution text with lower resolution graphics. Select the highest number for the best quality. Because printing in high resolution takes longer, you can reserve this setting for final documents. Select a low number to print faster; for example, to produce drafts of documents. Note: Your printer must have enough memory to hold the dots composing a print job. For laser printers with less than one megabyte of memory, select 75 or 150 dpi to print a full-page graphic, a dense graphic, or a full-page spreadsheet that has horizontal and vertical lines mixed with text. ═══ 36. Help for Fast System Fonts ═══ Select this check box to enable downloading of OS/2* system fonts. System fonts will be copied to the printer memory which allows your job to print faster and requires a smaller spool file than one that has the document in graphic font form. This feature should not be used when overlaying system fonts with graphics as text may not always appear. ═══ 37. Help for Printer Patterns ═══ Select this check box to enable internal printer patterns to be substituted for system patterns in filled graphic paths. Using printer patterns allows jobs containing shaded and patterned rectangular areas to print substantially faster and and require smaller spool files. This feature should not be used if printer output patterns should exactly match patterns displayed on your screen, nor if there are overlapping shaded or patterned graphics in your document. Printer resolution of 300 or higher is recommended when Printer patterns are enabled to ensure the best output. ═══ 38. Help for HP-GL/2 ═══ Select this check box to enable HP-GL/2 output. HP-GL/2 is the Hewlett-Packard Graphical Language used on plotters. This feature will allow faster printing of graphic objects as lines and circles. When printing very complex HP-GL/2 images, HP printers might report error 21, print overrun, on the front panel of the printer. If this happens, turn off the HP-GL/2 option in the Device Properties, or enable page protection at the printer front control panel and Printer Properties dialog, or add additional memory to the printer. Printer memory, page complexity and page protection interact with varying output speed and quality. For fastest output, enable page protection (which may require additional memory) on both the printer and Printer Properties dialog and use HP-GL/2. ═══ 39. Help for RET ═══ RET stands for Resolution Enhancement Technology. This is a feature found in certain Hewlett-Packard printers including Series III and Series 4 printers. With Series III printers, RET is set using the control panel on the printer. With Series 4 printers, RET is set by using the printer control panel or through software by using settings on this dialog. Resolution Enhancement Technology refines the print quality of characters and graphics by "smoothing" the fine gradations along the angles and curves of the printed image. RET has five possible settings: Default Use the RET setting currently set in the printer. Off Turn off RET completely. Light, Medium, and Dark These settings vary the effect of RET. See next paragraph. The factory default setting is medium. You may discover that a different setting works better for your printer. (See the RET block on the Printer Self Test print out). ═══ 40. Help for ECONOMODE ═══ EconoMode printing reduces the number of pixels or "dots of toner" placed on the page. By using EconoMode for your proofs and rough drafts, you can lower your cost-per-page by 50%. The print is still very readable. ECONOMODE has 2 possible settings: ON and OFF The factory default setting is OFF. ═══ 41. Help for IMAGEADAPT ═══ Image Adapt is a Hewlett-Packard innovation that compresses data so that you can print complex graphics using the printer's base memory. ImageAdapt has 3 possible settings: ON Lossy compression will be used on any images that need to have compression performed. OFF No use of the Lossy compression. AUTO The possible use of Lossy compression (as worst case). The factory default setting is AUTO. ═══ 42. Help for Large buffers ═══ For computers with at least eight MB of memory, printing speed will increase by using large buffers. For computers with less than eight MB of memory, do not use large buffers. Large buffers are only available at 600 DPI resolution. ═══ 43. Help for First Page ═══ This list contains all the forms defined for this printer. You can scroll the list to see more form names. Select the form on which the first page of your job should print. ═══ 44. Help for Remaining Pages ═══ This list contains all the forms defined for this printer. You can scroll the list to see more form names. Select the form on which all pages after the first page of your job should print. ═══ 45. Help for Form ═══ Use this field to select a particular form for a print job. Selecting the arrow displays a list containing the names of all forms defined for the printer. Select the form of your choice. Because you associate form names with a specific tray (in the Printer Properties window), selecting a form from this window causes the printer to feed paper from the appropriate tray, if loaded, or wait for the correct tray, if not loaded. ═══ 46. Help for Paper Feed ═══ Select one of the radio buttons to indicate the source for the paper form. The preselected choice, Automatic, means paper feeds from a tray without human intervention. Select Manual to have the printer wait for you to manually feed odd size forms, transparencies, or other media that should not feed from paper trays. If you select Manual, you are prompted to insert the paper before the printer processes each page of a job. Select Automatic mixed to use one form for the first page of your document, and a different form for subsequent pages. The type of form for Automatic or Manual paper feed is selected in the Form list. Selecting Automatic mixed causes two lists to appear. One form is selected in the First page list and a different form in the Remaining pages list. For a detailed explanation of each list, select from the list below: o Form o First page o Remaining pages ═══ 47. Help for 1 or 2 Sided Printing ═══ If your printer has the capability to print on both sides of a page, you can select one of the radio buttons in this field. 1 sided, the preselected choice prints pages on one side only. 2 sided book prints on both sides, with the top line on each page in the same location. 2 sided flip prints on both sides of the paper, but the top line on the back page corresponds to the top line of the front page. ═══ 48. Help for Define Forms ═══ In this window, you can add, delete, or change the size of named forms defined for this printer. 1. To add a form, type a unique form name. 2. Specify the units in which you prefer to see measurements: inches or centimeters. 3. Select the arrow to display the size list, then select the size you want to assign to the name. To delete a form, erase its name. For a detailed explanation of each field, select from the list below: o Name o Size o Units o Custom paper size o OK o Cancel ═══ 49. Help for Name ═══ In this field, type a unique name for a new form. You can use up to 22 characters. You can delete a form definition by deleting the contents of the Name field. ═══ 50. Help for Size ═══ This field expands to a list containing form size descriptions. Select the arrow to see the contents of the list. Sizes are shown with measurements in inches or centimeters, depending upon the Units selected. You use the list to assign a form size to the identifier in the Name field at the left. Select your choice from the listed sizes. ═══ 51. Help for Units ═══ Select one of the radio buttons to indicate whether you prefer the form size displayed in inches or centimeters. ═══ 52. Help for Custom paper size ═══ Custom paper size allows a form to be printed on something other than the standard pre-defined paper sizes. The width and length fields have minimum and maximum limits determined by the capability of the specified printer. Note: The minimum values for width and length fields are defaulted, whenever the units change. Also, the width and length fields must be selected or the fields default to the minimum values. ═══ resolution ═══ Density or sharpness of an image. For bit-map material, resolution is expressed in dots-per-inch, with higher quality output having more dots-per- inch. Resolution can be adjusted for some printers. Low-resolution images are printed faster, but appear coarser than high-resolution images. A printer's memory size can limit the resolution you can choose. ═══ spooling ═══ The process of temporarily storing print jobs while waiting for an available printer or port at a print-destination. Spooling jobs frees system resources from waiting for a relatively slow device to provide output, and keeps the contents of each print job separated from the contents of every other print job. ═══ radio button ═══ A circle with text beside it. Radio buttons are combined to show you a fixed set of choices from which only one can be selected. The circle is partially filled when a choice is selected. Contrast with check box. ═══ downloaded font ═══ A soft font copied (downloaded) to the memory of a printer. ═══ soft font ═══ Optional fonts shipped as files. Soft fonts must be installed onto the hard disk before they can be selected from programs. See also downloaded font. ═══ default ═══ A value, attribute, or option that is assumed when another is not explicitly specified. ═══ file name ═══ A name assigned or declared for a file. The file name includes an extension (if there is one). If you are using HPFS, the file name can be up to 254 characters and can include any number of periods. The following is an example of a path and file name in the HPFS file system where C: is the drive, the first \ is the root, INCOME is the directory, and SALES.FIGURES.FOR.SEPTEMBER is the file name: C:\INCOME\SALES.FIGURES.FOR.SEPTEMBER If you are using the FAT file system, the file name can be up to eight characters and can be followed by an optional three-character extension. The following is an example of a path and file name in the FAT file system where C: is the drive, the first \ is the root, INCOME is the directory, TAX is a subdirectory, and SALES.TXT is the file name and extension: C:\INCOME\TAX\SALES.TXT ═══ queue ═══ A list of jobs waiting to print or plot at a particular print destination. See also spooling and spooler ═══ 53. Help for Device Defaults ═══ Use Device defaults to request multiple copies, specify orientation, resolution, performance options, and elect to download system fonts. You can select a tray-loaded form or indicate that you will feed forms by hand, and specify output bin if your printer has more than one place for holding printed pages. You also can select dual-sided printing for printer models offering this feature. Some programs display a similar window, enabling you to assign these types of properties for a specific document or template. You can also set up default job properties for a particular print queue. When setting up a printer driver, you select device defaults that take effect if neither the queue nor the program supplies job properties. For a detailed explanation of each field, select from the list below: o Copies o Orientation o Fast system fonts o Printer patterns o HP-GL/2 o Large buffers o Resolution o Form o First page o Remaining pages o Paper feed. o 1 or 2 sided printing o Output bin o RET o Economode o ImageAdapt o Effects o OK ═══ 54. Help for Output Bin ═══ Select the appropriate radio button to indicate where you want the printer to route your printed pages. You only use this field if your printer has more than one output bin. ═══ 55. Help for Effects ═══ Select Effects if you want to install or select patterns. ═══ 56. Help for LaserJet Printing Effects ═══ This window has two sections. Use the fields in the top half of the window to select the patterns you want for filling the characters in a print job and for the background behind those characters. For example, you might select gray shading to fill the characters, or diagonal lines to fill the page behind the characters. Your printer has 15 predefined patterns. Use the User Defined Patterns fields in the lower half of the window to install additional patterns. For a detailed explanation of each field, select from the list below: o Pattern mode o Pattern o Background (destination) o New patterns directory o New patterns o Installed patterns o OK o Reset o Open o Add o Delete o Cancel ═══ 57. Help for Pattern Mode ═══ Use this field to indicate whether you want the background pattern from your job to show within the borders of the characters. Select the Opaque radio button if you do not want the background pattern to mix with the pattern of the characters. (If you do not select a pattern for the characters, they appear as either all black or all white.) Select the Transparent radio button if you want the background pattern to mix with the character pattern or gray tone. ═══ 58. Help for Pattern ═══ This field shows the pattern currently selected to fill the characters for your print jobs. Next to the Pattern field is a box that has a picture of the pattern. To see the other patterns that are currently installed on your system, select the arrow to the right of the field. Each time you select a different pattern, a picture of that pattern appears in the box to the right of the field. Your printer has 15 predefined patterns and shades of gray, including black and white. You can install additional patterns. ═══ 59. Help for Background (Destination) ═══ This field shows the pattern currently selected to fill the page behind the characters for your print jobs. Next to the Background (destination) field is a box that has a picture of the pattern. To see the other patterns that are currently installed on your system, select the arrow to the right of the field. Each time you select a different pattern, a picture of that pattern appears in the box to the right of the field. Your printer has 15 predefined patterns and shades of gray, including black and white. You can install additional patterns. ═══ 60. Help for New Patterns Directory ═══ Use this field to indicate the location of pattern files you want to install. Usually, you install new patterns from a diskette, so the field contains the initial value A:\. You can type a different path, if, for example, you create your own patterns and store them on your hard disk. ═══ 61. Help for New Patterns ═══ This field displays file names for patterns stored in the New patterns directory. To fill the list: 1. Insert the appropriate diskette in drive A, or fill in the New patterns directory field with the location of the patterns on your hard disk. 2. Select Open. You can scroll the list to see more pattern files names. Select any you want to install, then select Add to add the selected patterns to the Installed patterns field. ═══ 62. Help for Installed Patterns ═══ This list contains the file names containing the patterns currently installed and available for selection in the Pattern and Background (destination) fields. ═══ 63. Help for Open ═══ Select Open to read pattern files from the drive and directory identified in the New pattern directory field. ═══ 64. Help for Add ═══ Select Add to add selected New patterns to the Installed patterns field. ═══ 65. Help for Delete ═══ Select Delete to remove selected patterns from the Installed patterns list.