README.TXT - Documentation Supplement
                October 5, 1993 - Beta Release 0.90
 
                       Hercules Dynamite(tm)
     Tseng ET4000/W32 & W32i OS/2 2.1 Display Driver Diskette

          Hercules Dynamite Card(tm)        (Model D201)
          Hercules Dynamite Pro(tm) 1MB     (Model D301)
          Hercules Dynamite Pro 2MB         (Model D302)
          Hercules Dynamite VL(tm)          (Model D501)          
          Hercules Dynamite VL Pro(tm) 1MB  (Model D601)
          Hercules Dynamite VL Pro 2MB      (Model D602)

                                             

  Contents:

    Before You Begin

    Installing the Display Drivers

    How To Report A Bug To Hercules



  Before You Begin
  ----------------
  
  The beta OS/2 2.1 display driver files contained on this 
  diskette support Hercules Dynamite products based on either 
  the Tseng Labs ET4000/W32 or ET4000/W32i graphics accelerator 
  chip.
                            
                            

  Installing the Display Drivers
  ------------------------------
  
  These instructions assume that OS/2 2.1 is already installed
  and running with your Hercules Dynamite product. 

  1.  Open OS/2 SYSTEM.

  2.  Open COMMAND PROMPTS.

  3.  Open either OS/2 WINDOW or OS/2 FULL SCREEN.

  4.  Insert the Tseng ET4000/W32 & W32i OS/2 2.1 Display Driver 
      Diskette in drive A:.


  5.  Type the following:

         CD \OS2\INSTALL [Enter]
         COPY A:\TSENGW32.DSC [Enter]
         DSPINSTL [Enter]

  6.  From the DISPLAY DRIVER INSTALL window,
         select PRIMARY DISPLAY
         select OK.

  7.  From the PRIMARY DISPLAY ADAPTER TYPE window,
         select TSENG LABORATORIES ET4000/W32i
         select OK.

  8.  From the MONITOR CONFIGURATION/SELECTION UTILITY window,
         select INSTALL USING DEFAULTS FOR MONITOR TYPE
         select OK.

  9.  From the SELECT DISPLAY RESOLUTION window,
         select the desired resolution
         select OK.

  10. From the SOURCE DIRECTORY window,
         select INSTALL.

  11. When the drivers are completely installed, you will be 
      prompted to shut down and restart the system for changes 
      to take effect.
         select OK.

  12. Remove the diskette from drive A:.

  13. Shut down and restart.



  How To Report A Bug To Hercules
  -------------------------------

  A text file called BUGFORM.TXT has been provided on this 
  diskette so that you can report to Hercules any bugs that 
  you may encounter with these display drivers.    

  To report a bug, simply fill in the blanks in the text file 
  and either Fax it to 510-623-1112, or upload it to the 
  Hercules BBS at 510-623-7449 (V.32bis), 510-623-7034 (V.32) 
  or 510-623-7142 (2400 baud). 

  Please send it to the attention of: 

     HERCULES DYNAMITE OS/2 2.1 
     DISPLAY DRIVER BETA ADMINISTRATOR.


  ** End of File **