Introduction
------------
Welcome to the Graphiti section of the Media Gallery CD!
The software in this area is ONLY for the following
SPEA Graphiti series boards:

  Boards with a Hitachi processor:
  (Directories: PAINTER, GALLERY, PAINT_GAL)
  - Painter
  - Gallery

  Boards with a TMS processor:
  (Directories: FGA, HILITE, HIL_FGA)
  - FGA
  - FGA860-HE
  - HiLite
  - HiLite Pro

  Boards and subsystems with an i860 processor:
  (Directories: FIRE, GX, FIRE_GX)
  - FIRE
  - FGA860-GX

Creating Installation Disks
---------------------------
In order to install software for these boards from the Media Gallery CD
it is necessary to create installation disks. This is done by simply
changing to the respective directory on the CD and by copying its
contents onto a 1.44MB disk (a DOS label is not necessary). If several
subdirectories exist (DISK1, DISK2 etc.) then you must create a
separate disk for each subdirectory.

Structure on the CD
-------------------
To enable you to find the software you need quickly, we have created
a directory structure which has 4 main groups:

  - SUPERDSK   (contains the last release of the Superdisk software -
      BOARD     the installer and all drivers)
        DISK1

  - DRIVERS    (individual drivers, possibly newer than those
      DRIVERS   on the Superdisk, or not contained there, as
        BOARD   they became available at a later date)
          DISK1

  - TOOLS      (Add-on software)
      BOARD
          DISK1

  - DEVPMNT    (Development software, e.g. for 2D and 3D applications)
      TOOLKIT

Installing from the Disks
-------------------------
After you have copied the software to the disk(s), read the
README.ENG file located in the source directory (e.g.
...\SPEA\GRAPHITI\SUPERDSK\FIRE\DISK1\README.ENG
This contains further information about the installation and
any last-minute changes. If the installation of a particular
application is not described there, the description in the
manual you received with your board applies.

Release-Information
-------------------
The version numbers of the software are stated in the README.ENG
of the respective subdirectory for each software package.

SPEA Software AG
AvT/30.6.95