;   In order to be effective, changes to this file must be acted upon
;   by PK.EXE.
;
;   PK.EXE should be executed in the pE directory (where pe.exe is)
;
;   PK [key.txt]
;
;     one can also specify wp.txt or ws.txt.  Output will always be
;     KEY.PED in the same directory where the .txt file was found.
;
; ÛßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛ
; Û	    IF YOU'RE NOT SURE OF WHAT YOU'RE DOING - PLEASE MAKE A	    Û
; Û		   COPY OF KEY.PED BEFORE YOU RUN PK.EXE		    Û
; ÛÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÛ
;
;   If you're in to wordstar commands - take a look at ws.txt.
;
;   Registered users also receive wp.txt (WordPerfect keystroke emulation)
;
;   Data following semi-colons are treated as commentary
;
;   Key names are defined as follows
;
;	   f1 - means function key F1
;	  ^f1 - means control key and F1
;	  f1 - means shift key and F1
;	  @f1 - means alt key and F1
;
;   two (or more) keys can be used for a single command as
;   long as the keys in the sequence are joined with an
;   underscore character, like this: ^a_c
;
;   note, however, that the first key in a two key sequence cannot
;	  then be used as a single key.  So, in the above sequence,
;	  ^a (alone) could not also be assigned a function.  It would have
;	  no effect.
;
;   one or more spaces follow each field and are field separators
;
;   The ordering of keys in this file is arbitrary, put it in whatever
;   order you feel is logical.
;
;   While a function may have more than one key assigned, the same key
;   cannot be used for more than one function.
;
;   Note that key names go in field one, functions in field two.
;
; 1	 2    ;and these are comments just as any line that begins with a ;

^^_^a	^a		;these assignments allow the keyin
^^_^b	^b		;of any literal control character by
^^_^c	^c		;first typing ^ (control circumflex)
^^_^d	^d		;followed by the control character you
^^_^e	^e		;want.
^^_^f	^f
^^_^g	^g
^^_^h	^h
^^_^i	^i
^^_^j	^j
^^_^k	^k
^^_^l	^l
^^_^m	^m
^^_^n	^n
^^_^o	^o
^^_^p	^p
^^_^q	^q
^^_^r	^r
^^_^s	^s
^^_^t	^t
^^_^u	^u
^^_^v	^v
^^_^w	^w
^^_^x	^x
^^_^y	^y
^^_^z	^z
^^_^[	^[
^^_^\	^\
^^_^]	^]
^^_^^	^^
^^_^_	^_

`	LastAscii	;this character will produce the last character the
			;ascii window was set to - if ascii window is never
			;called it will be itself.
;
; f1 - f10
;

f1	ExecuteCommand	;provides a menu of all commands and keystrokes
f2	JumpNext	;jump (cycle) to next window number
f3	InsertDelLine	;undeletes the just deleted line
f4	DeleteLine	;deletes the current line
f5	FindForward	;find a string from cursor towards "bottom"
f6	FindBackward	;find a string from cursor towards "top"
f7	FloatBlock	;move a column block of text with arrow keys or mouse
f8	PrevMark	;position cursor to saved location (SetMarks)
f9	GoTo		;go to line number, offset (hex edit), or bookmark
f10	Menu		;another way to get to menu

; extended keyboard only

f11	OpenDosWindow	;open a window with the text from DOS screen
f12	StackWin	;minimize all windows into 'stacks'

; shift f1 - f10

f1	MatchBrace	;locate the corresponding { ( or [
f2	JumpPrev	;jump to previous window
f3
f4
f5	FoundList	;Build a list of found items and put into FIND.PED
f6
f7
f8
f9	ToggleDecHex	;set either decimal or hex offsets (hex edit only)
f10	SetParagraphStyle   ;set left, right, indent and paragraph alignment

f11	ToggleBorders	;allow/disallow borders
f12	JumpZoom	;maximize a window when jumped to

; control f1 - f10

^f1	RecordMacro	;assign multiple keystrokes/commands to a single key
^f2	SaveOptions	;save all settings (including macros) to env.ped
^f3	InsertDelSeg	;Undo delete to end of line
^f4	DeleteToEol	;delete to end of line
^f5	ToggleCase	;make fine case sensitive or not
^f6	ToggleWordprocess ;sets automatic paragraph alignment as you type
^f7	SetTabs 	;set tab stops, detab increment and tabs/blanks
^f8	SetMarks	;store position of cursor
^f9
^f10	UndoPara	;will undo last paragraph alignment

; extended keyboard only

^f11	SetLineLength	;allows word wrap at specified margin
^f12	Minimize	;minimize current window

; alt f1 - f10

@f1  AsciiChart      ;allows you to choose any ASCII character
@f2  Calendar	     ;dates
@f3
@f4
@f5  RegularExp      ;turns "regular expression" (patterns) on/off
@f6  AllWindows      ;search and replace across all windows when set
@f7  ToggleAutoTab   ;when on, tabs/shifttabs after { or }
@f8
@f9
@f10 StartUp	     ;can be assigned a series of commands to be executed
		     ;when pE begins

; extended keyboard only

@f11 ShowMacros      ;shows any currently assigned macros
@f12 Maximize	     ;maximizes current window

; alt a-z

@a  AlignParagraph   ;formats paragraph
@b  BlockMarkColumn  ;marks a rectangular area of file
@c  CascadeWin	     ;arranges windows in overlapped fashion
@d  DosCommand	     ;goes to DOS to execute specified command
@e  EditFile	     ;edits an existing file in new window
@f  DefineFind	     ;defines find string (and initiates search)
@g  ToggleGraphics   ;redefines qwerty keyboard into graphics characters
@h  ToggleHex	     ;file is edited in "hex dump" mode
@i  EditIncludeFile  ;opens a file enclosed in < > on current cursor row
@j  JumpList	     ;shows all open windows, allows selection
@k  KloseWindow      ;closes current window
@l  BlockMarkLines   ;marks a range of lines
@m  MergeFile	     ;merges a specified file into current file
@n  NewFile	     ;clears current window to edit a "new file"
@o  OpenFile	     ;opens a file in current window
@p  PrintLines	     ;prints file to printer or file (F3 after @p)
@q  QuickExit&Save   ;Saves file and exits (if changed)
@r  DefineReplace    ;Sets search and replace strings
@s  SaveFileAs	     ;Allows filename change before saving
@t  TileWindows      ;Arranges windows in 2, 3, or 4 'Tiles'
@u  UnmarkBlock      ;Un mark a block
@v  ViewOnly	     ;Open a file in uneditable window.
@w  OpenWindow	     ;Opens a new window called "NO_NAME"
@x  Exit	     ;Exits with prompt to save changed files
@y  DefineTag	     ;Allows saving of 26 'bookmarks' for later goto
@z  ZoomWindows

; alt 1 - 0

@1  SingleLineBox    ;draws a single line box around a marked rectangle
@2  DoubleLineBox    ;draws a double line box around a marked rectangle
@3  TwoDownBox	     ;double down single across
@4  TwoAcrossBox     ;double across single down
@5  ThickLineBox     ;'fat' box
@6  ASCIIOneBox      ;/
@7  ASCIITwoBox      ;|various styles of boxes without use of graphic
@8  ASCIIThreeBox    ;|characters
@9  ASCIIFourBox     ;\
@0  UndoBlock	     ;Undoes last box draw and last block search&replace

@-  ManifestFilename  ;inserts current filename at cursor
@=  ManifestCalcValue ;inserts calculater register at cursor

; numeric keypad

Home	Home		;cursor moves to beginning of line/edge of window
End	End		;cursor moves one character past end of line
^Home	PageTop 	;cursor moves to top line of window, column stays same
^End	PageBottom	;cursor moves to bottom line, column doesn't change

Ins	Ins		;characters typed are inserted/replaced
Del	Del		;the character above the cursor is deleted

Up	Up		;cursor moves one line up, same column
Right	Right		;cursor moves one character right, same row
Down	Down		;cursor moves one line down, same column
Left	Left		;cursor moves one character right, same row

^i	TabRight	;cursor moves one tab stop to right
tab	TabLeft 	;cursor moves one tab to left
			;if ins is on, tab will "push" all characters to right
			;of cursor one tab stop, if off only cursor moves

			;if block is marked, all lines in block move one tab


Grey-	Cut		;"cuts" the marked block (or a single line) to "scrap"
			;also called clipboard, buffer....

Grey+	Paste		;"pastes" the contents of the "scrap" into file;
			;the effect differs depending on Ins/Replace mode.
			;cut and paste are not user assignable keys
			; OutputBlock and InsertDelBlock are the names of the
			; commands (see ^q_c and ^q_b)

			;Cut cuts text to file pb$$$$.ped(no affect on scrap)
			;Paste pastes text from  pb$$$$.ped (not from scrap)

Grey*	CopyToScrap	;copies block to scrap, replacing

PgUp	PgUp		;displays previous screen of file
PgDn	PgDn		;displays next screen
^PgUp	FileTop 	;positions to first line of file
^PgDn	FileBottom	;positions to last line of file


^Right	WordRight	;moves cursor to start of next word
^Left	WordLeft	;moves cursor to start of prev word

; control key combinations

^a_b	AddBlock	;adds up a block (hopefully) of numbers

^a_c	Center		;center text in block or between margins
^a_l	LeftFlush	;left flush text
^a_r	RightFlush	;right flush text

^c	Calculator	;call calculator
^d_d	DateEntry	;enter the date into file at cursor
^d_t	TimeEntry	;enter the time into file at cursor

^Del	UndeleteBlock	;deleted with del key

^e	RightEdge	;move cursor to right edge of window (east)
^w	LeftEdge	;move cursor to left edge of window (west)

^h	BackSpace	;delete the character to the left of the cursor


^k_k	BlockMarkStream ;marks a block beginning at the current cursor
			;position one character at a time
			;holding the control key while dragging the mouse
			;will also mark this kind of block
			;shift and arrow keys will also work
			;this command is provided a key sequence primarily
			;for macro assignment.

^k_f	FillBlock	;allows filling a block with a specified character

^k_d	SingleSpace	;deletes blank lines from cursor on or within block
^k_l	LowerCase	;lower cases all characters in block
^k_u	UpperCase	;upper cases all characters in block
^k_m	MoveBlock	;moves the specified block to new location
			; - does a cut from old location and a paste in new
^k_n	DoubleSpace	;inserts a blank line between each line
^k_s	SaveFile	;writes file from memory to disk (uses assigned name)
^k_t	MarkWord	;marks a single word
^k_w	WriteBlock	;allows a range of marked lines to be written to file
^k_x	RestoreLine	;restores line if edit has not been "committed"

^m	Enter		;action depends on Ins/Replace; generally moves
			;one line down in file

^n	InsertLine	;inserts a blank line and positions cursor on it

^q_c	OutputBlock	;cuts block to pb$$$$.ped (see cut and paste)
^q_b	InsertDelBlock	;merges text from pb$$$$.ped (only)

^q_l	LeaveEditorNow	;exits editor - NO SAVES or PROMPTS, just exits.

^q_n	WordCount	;counts words within spaces.


^t	DeleteWord	;deletes next word
^q_t	InsertDelWord	;inserts a word deleted with DeleteWord

^q_j	JoinLine	;concatenates next line onto current line
^q_u	DupLine 	;duplicates from cursor on and inserts that text onto
			;next line, will also replace if Replace is on.

^q_w	ParagraphUp	;moves cursor to paragraph above this one
			; also pgup (shift page up)
^q_z	ParagraphDown	;moves cursor to paragraph below this one
			; also pgdn (shift page down)
^q_y	DeleteToEol	;deletes from the cursor to end of line

^r	RepeatChar	;repeats a character or command a specified number
			;of times
^s	SortBlock	;sorts a block in ascending ascii order.

^bs	DeletePrevWord	;deletes the word to the left of the cursor

^y	DeleteLine	;deletes the current line
^u	InsertDelLine	;undeletes the just deleted line

^Up	CursorToTop	;positions line cursor is on to the top of the window
^5	CursorToCtr	;positions line cursor is on to center of window
^Down	CursorToBot	;positions line cursor is on to bottom row of window

^v_h	HorizontalRuler ;puts a horizontal ruler on the screen
^v_v	VerticalRuler	;puts a vertcal ruler on screen
^v_u	ToggleUnixLines ;allows Unix ASCII files to be read and written
^v_x	ToggleLines	;changes video display from 25 to 43/50 lines & back

^v_t	CursorToTop	;positions line cursor is on to the top of the window
^v_c	CursorToCtr	;positions line cursor is on to center of window
^v_b	CursorToBot	;positions line cursor is on to bottom row of window

^v_a	ASCIIChart	;calls ASCII window

^[	CancelOp	;ESC key generally cancels operation

^\	ToggleMacro	;turns macro processing on/off
^_	ClearMacro	;undefines a macro

; extended keyboard extra keys

@Enter	OpenLine     ;remaining characters on line are pushed to next line
			;cursor remains stationary

^Grey/			;this is the grey / on the numpad
^Grey-
^Grey+	WrapLines	;wraps long lines on input (only)
^Grey*	AppendToScrap	;marked text is added to current contents of scrap
^Ins	VisibleSpaces	;Makes blanks visible/invisible

@Home	SizeWindow   ;allows window to be sized
@End	MoveWindow   ;allows window to be moved

@Up	ScrollUp     ;scrolls text down (not the cursor)
@Down	ScrollDown   ;scrolls text up
@Left	ScrollLeft   ;etc, etc, etc,
@Right	ScrollRight  ;etc, etc, etc,

@PgUp		     ;grey one
@PgDn		     ;grey one
@Ins	LeaveBlanks  ;do NOT trim blanks from end of lines
@Del
@/	Delay	     ;sets execution delay in macros
@Tab	OptionMenu   ;calls up the option menu to set different flags


;
; commands below are not assigned to any keys
;

SetColors		;changes the colors of windows, menus and messages
SetInsRpl		;sets Ins/Rpl mode on startup
DisplayOwner		;displays name of user who installed pE
SetBackup		;sets backup directory path
SetCursor		;sets cursor size and shape
ToggleMenu		;turns menu line on/off