
^m╒═══════════════════╤═════╤═════════════════════╤═════╤════╡^t Toggles ^m╞═╤═════╕
│ ^nSound             ^m│ ^hOn  ^m│ ^nDialer auto untag   ^m│ ^hOn  ^m│ ^nClosing screen ^m│ ^hOn  ^m│
│ ^nTransfer info     ^m│ ^hOn  ^m│ ^nAuto save history   ^m│ ^hOn  ^m│ ^nBaud in status ^m│ ^hOn  ^m│
│ ^nHide passwords    ^m│ ^hOn  ^m│ ^nShow big CONNECT    ^m│ ^hOn  ^m│ ^nTransfer slice ^m│ ^hOff ^m│
│ ^nConnect noise     ^m│ ^hOn  ^m│ ^nJump back to phone  ^m│ ^hOff ^m│ ^nRegInfo bright ^m│ ^hOn  ^m│
│ ^nMouse             ^m│ ^hOff ^m│ ^nBackup cfg/phone    ^m│ ^hOn  ^m│ ^nAsk phone      ^m│ ^hOn  ^m│
│ ^nTag advance       ^m│ ^hOn  ^m│ ^nChange when Ctrl    ^m│ ^hOn  ^m│ ^nSecond backup  ^m│ ^hOn  ^m│
│ ^nAuto Ansi         ^m│ ^hOn  ^m│ ^nChange when Alt     ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nStart in phone    ^m│ ^hOff ^m│ ^nChange when Ctrl+Sh ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nAsk at Alt-X      ^m│ ^hOff ^m│ ^nAfter transfer beep ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nAsk at Alt-H      ^m│ ^hOff ^m│ ^nAuto-open capture   ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nOpen logfile      ^m│ ^hOn  ^m│ ^nOverwrite capture   ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nQuick dialing bar ^m│ ^hOff ^m│ ^nReturn aborts dial  ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nStart in top      ^m│ ^hOff ^m│ ^nWrap word in chat   ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nEnhanced keyboard ^m│ ^hOn  ^m│ ^nKey click           ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nAutosave config   ^m│ ^hOn  ^m│ ^nCtrl in capture     ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nCrypt cfg/fon     ^m│ ^hOff ^m│ ^nBlind support       ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nOpening screen    ^m│ ^hOn  ^m│ ^nPassword checking   ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nAuto update baud  ^m│ ^hOn  ^m│ ^nShell information   ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nFlush Cache       ^m│ ^hOn  ^m│ ^nImport descriptions ^m│ ^hOn  ^m│ ^n               ^m│ ^h    ^m│
│ ^nPhonebook after   ^m│ ^hOn  ^m│ ^nCapture keystrokes  ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nSave scrollback   ^m│ ^hOn  ^m│ ^nAsk device at start ^m│ ^hOff ^m│ ^n               ^m│ ^h    ^m│
│ ^nSave tagfile      ^m│ ^hOn  ^m│ ^nSave before dial    ^m│ ^hOff ^m│ ^nReset toggles  ^m│ ^h    ^m│
╘═══════════════════╧═════╧═════════════════════╧═════╧════════════════╧═════╛

 ^hSound^n

  Turn on/off all alarms/beeps. You can also set a time period where
  sounds could be disabled.

 ^hTransfer info^n

  Enable/Disable statusbar, activity bar and block information. If you suspect
  something is slowing down the system, then turning this off might improve
  the speed a little.

 ^hHide passwords^n

  If hide is on, all characters typed will be shown as dots on the screen
  when any password is entered.

 ^hConnect noise^n

  Make a sound when carrier is received.

 ^hMouse^n

  Allow use of mouse.

 ^hTag advance^n

  When anything is tagged, then jump to next line.

 ^hAuto Ansi^n

  Some systems sound an ANSI request cursor position; if enabled Terminate
  will respond and the other end will assume you are capable of ANSI.

 ^hStart in phone^n

  Jump directly to the phonebook at startup.

 ^hAsk at Alt-X^n

  Ask: "Are you sure?" when pressing Alt-X in Terminal mode.

 ^hAsk at Alt-H^n

  Asks if you are sure you want to hangup the line when pressing Alt-H.

 ^hOpen logfile^n

  Enable logfile at startup.

 ^hQuick dialing bar^n

  Use Quick Dialling Bar in phonebook.

 ^hStart in top^n

  After loading a phonebook, place menubar at the top.

 ^hEnhanced keyboard^n

  Allow use of F11 and F12 on enhanced keyboard (AT).

 ^hAutosave config^n

  Make sure your configuration is always saved.

 ^hCrypt cfg/fon^n

  Encrypt configuration file and all phonebooks next time they are
  saved. The encryption will change each time.

 ^hOpening screen^n

  Skip the TERMINATE picture when starting (only registered users).

 ^hAuto update baud^n

  Update baudrate in phonebook to show the last connect rate obtained
  on that system.

 ^hFlush Cache^n

  Flush diskcache right after saving configuration and any phonebooks,
  to make sure nothing is lost.

 ^hPhonebook after^n

  When you get hung up by the system you just called or logoff the system,
  this function will allow you to force Terminate directly into the phonebook
  afterwards.

 ^hSave scrollback^n

  Save the entire scrollback buffer and position in TERMINAT.SBK and reload
  next time you startup Terminate.

 ^hSave tagfile^n

  Load latest tagfile at startup. The file is called TERMINAT.TBK and is
  placed in the Terminate directory. With this function both filenames and
  tagged filenames be remembered for next time.

 ^hDialer auto untag^n

  When you connect to a remote system, Terminate will untag all entries that
  have the same 5 first characters in the system name.

 ^hAuto save history^n

  Save and load the contents of history strings at startup/closedown
  Look in ^hAlt-F9^n for more information.

 ^hShow big CONNECT^n

  When carrier is detected a gigantic CONNECT picture will be shown.

 ^hJump back to phone^n

  Upon a no connect string like BUSY or NO CARRIER, dialling is aborted and
  return to phonebook.

 ^hBackup cfg/phone^n

  Make backup files of configuration (.CBK) and phonebooks (.PBK).

 ^hChange when Ctrl^n

  Change statusline when holding down Ctrl in terminal mode

 ^hChange when Alt^n

  Change statusline when holding down Alt in terminal mode

 ^hChange when Ctrl+Sh^n

  Change statusline when holding down Ctrl+Shift in terminal mode

 ^hAfter transfer beep^n

  Keep on beeping until any key is pressed after a filetransfer is
  completed, will timeout after 60 seconds.

 ^hAuto-open capture^n

  Enable the auto-open capture feature.

 ^hOverwrite capture^n

  Force overwrite of capture when the auto-open feature is used.

 ^hReturn aborts dial^n

  If enabled then Return will hangup the line instead of return.

 ^hWrap word in chat^n

  Use wordwrap in chat mode.

 ^hKey click^n

  Make a click sound when pressing any key.

 ^hCtrl in capture^n

  If disabled, then Ctrl codes will be filtered off in capture files.

 ^hBlind support^n

  Read BLIND.DOC for more information.

 ^hPassword checking^n

  Use the password checker, when entering passwords.
  Terminate will warn you when you password that are too easy to guess.
  Terminate will search a file through with bad passwords called
  PASSWORD.BAD (Normally in the utility directory).
  You should never use passwords that only consist of numbers or the
  same letter like '911' or 'AAAA'. You should also never use your
  wife/girlfriend/children or any other human names, because they are
  the first names a hacker will try with. If you have a dog called
  Fido, you can mix in some numbers like: 'F0I1D2O3' nobody will then
  guess it because the combinations are too high and will take too many
  tries. If you only use these passwords, the only way a person can
  get your passwords is if he gets direct access to your computer or the
  system you are calling.
 
 ^hShell information^n

  Show information on screen when calling external programs.

 ^hImport descriptions^n

  When uploading, Terminate will search FILES.BBS/DESCRIPT.ION for a
  description of the file. When you are finished uploading and the system
  asks you for the description, you can press Alt-F9 and send that descript-
  ion. This will only operate if you select 16 or less files to upload.

 ^hCapture keystrokes^n

  When capturing with Alt-L or Autocapture. Then you can record all the
  keystrokes that you press in terminal mode. If you press an A then [A,65]
  will be recorded. The 65 is the ascii value for 'A'. Please do not abuse
  this function.

  ^hAsk device at start^n

  If you are using several devices, it might be a usefull feature for you
  to select the current device when starting up Terminate.

  ^hSave before dial^n

  When you are installing a new device or setting up new drivers, you
  should save your phonebook before dialing, because if your driver does
  not work it could hang the machine and you would loose your changes.
  When you are sure everything works, you should turn off this function.

  ^hClosing screen^n

  When leaving Terminate you can disable the last screen.

  ^hBaud in status^n

  When enabled Terminate will show the connect bps in the statusline
  when you are online. The device speed is really not important because
  normally the port is locked at 19200 or 38400 (If using a modem faster
  than 2400 baud). If for some reason you don't want the connect bps
  to be shown you can turn it off here.

  ^hTransfer slice^n

  Release some timeslices while transfering files, giving more time to
  the other tasks.

  ^hRegInfo bright^n

  If you bought Terminate PROFESSIONAL the registration information will
  be shown when pressing Alt-O. If you want to use dark gray when
  showing the information (almost invisible) turn this off.

  ^hAsk phone^n

  When changing phonebooks (Alt-D) with P, this will ask if this phonebook
  should be default for the current device. If you think it is annoying
  just turn it off and it will make it the current book everytime you
  change book.

  ^hSecond backup^n

  The configuration and the phonebooks are the most important datafiles
  for Terminate. When you enable this function Terminate will create
  an extra backup of these files if ^hBackup cfg/phone^n is enabled.
  Here is what actually is done:

   1. Erase     TERMINAT.2BK
   2. Rename    TERMINAT.PBK  -> TERMINAT.2BK
   3. Rename    TERMINAT.FON  -> TERMINAT.PBK
   4. Write new TERMINAT.FON

  The same procedure is followed for the configuration.

  ^hReset toggles^n

  Sets all toggles to 'factory' settings. These settings are the same as
  the first time you accessed this menu.

