*** The PC Bindery *** Version 2.3 (C)1993 Rasmussen Software Inc. This program requires a printer from the HP LaserJet family, or a compatible. To print out the documentation for this program and see a demonstration of its abilities, type the following at the DOS prompt: If your LaserJet II or better has a face down output tray, type: PCBIND pcbind.prn /FD where is the name of the port your HP LaserJet II/compatible printer with a face down output tray is connected to. OR If your LaserJet II or better has only a face up output tray, type: PCBIND pcbind.prn /FU where is the name of the port your HP LaserJet II/compatible printer with a face up output tray is connected to. OR If you have a LaserJet or LaserJet Plus/compatible, type: PCBIND lj1doc.prn /FU where is the name of the port your HP Laserjet/Plus/compatible is connected to. OR If you have a LaserJet IID, IIID or compatible duplex printer, type: PCBIND pcbind.prn /D where is the name of the port your duplex printer is connected. After the printer has finished printing, you will be asked to reinsert the paper and press on the computer. Go to the printer, and put the paper into the manual feed tray so that the top of the printing is on the left side of the printer, and that the paper is face down in the printer. Press on the computer, and the printer will print the back side of the manual. Fold it in half, and read about how to make your own booklets. PLEASE NOTE: PCBIND is a Shareware program that requires registration if you find it useful. The unregistered version will only print 12 pages. To register, and recieve a fully functional copy, please print out the file REGISTER.FRM included in this archive, and send it to the address printed on the registration form.