rmem}
pfreq}
rmodeA
rfreq
check
Memchan
@	Selectmem
Setfreqs"
SetmodeK
@	Selectvfo
Mmode
COMPp
GETFREQ
RQMODE
SETMOD
SETFRQ
SETVFO
SETMEMCHAN
	STOREFTOM
	WRITEMTOV
count
Icom-735 Control Program
Robert A. Harris
WB4HRH
CIS# 74365,162
VERSION #3
This program was written in Quick Basic Ver. 4.5
All code is in the Public Domain
Set Com: Port
 WHICH COM: PORT ? ( 1 or 2 )"
COM1:1200,N,8,1"
COM2:1200,N,8,1"
type of rig
 Select ICOM Radio "
{1} IC-735
{2} IC-725
{3} IC-7000"
{4} IC-761
{5} IC-781
IC-735
IC-725
IC-7000"
IC-761
IC-781
Not a Selection ....
Initialize
Select Memory Mode 1
Written by R. A. Harris"
WB4HRH
MAIN MENU
GET FREQUENCY.
CALL rfreq(d1$, d2$, d3$, d4$)
GET MODE
 CONTROL PROGRAM
{F} Set Frequency"
{M} Set Mode
{V} Select VFO
{C} Select Memory Channel"
{S} Store Frequency in Memory"
{W) Write Memory to VFO"
{U} Update Status"
{Q} Quit Program
CALL pfreq
Brought to you by WB4HRH
R.A.HARRIS
CIS# 74365,162
COMMUNICATIONS PROBLEM
 CHECK ALL CONNECTIONS
( PRESS ANY KEY )"
 Memory Channel: "
pfreq
print on screen
 Frequency: 
rmode
print on screen
 Mode: "
            
Bandwidth if present
B-width: WIDE"
B-width: MEDIUM"
B-width: NARROW"
rfreq
SHARED icom$
check
LOCATE 2, 1
PRINT r$; 
Memchan
Selectmem
Select Memory Channel
 CONTROL PROGRAM
{M} Memory Mode"
{#} Channel Number
{U} Channel UP
{D} Channel Down
{Q} Return to Menu
 Memory Channel: "
Select Memory Mode
 Memory Channel: "
Setfreqs
FREQUENCY INPUT MODULE
 CONTROL PROGRAM
INPUT FREQUENCY : 
Press ENTER to end
          
ENTER AND PRINTd
MAIN ROUTINE
INPUT ROUTINE
        
SEND INPUT TO RADIO
Setmode
Set the mode
 CONTROL PROGRAM
{U} USB"
{L} LSB"
{A} AM
{F} FM
{C} CW
SEND INPUT TO RADIOM
Selectvfo
Selct VFO`
 CONTROL PROGRAM
{A} Select VFO A
{B} Select VFO B
{Q} Return to Main Menu"
SEND INPUT TO RADIOn
Mmode
Put in Memory Channel Mode'
Selct VFO`
 CONTROL PROGRAM
{A} Write to VFO A
{B} Write to VFO B
SEND INPUT TO RADIO