Here are instructions for setting up DSL for Zipcon on Windows 95/98.

Qwest users: please be sure the DSL adapter is in RFC 1483 Bridging mode.

1) Go into the Start menu.
2) Choose Settings.
3) Choose Control Panel.
4) Double click on Network.
5) Double click on "TCP/IP".
6) Under the IP address tab, choose "Specify IP Address".
   Fill in the IP address and netmask you received from Zipcon.
7) Under the Gateway tab, if anything is listed in installed
   gateways, click on them one at a time and click Remove.
   Then type in the gateway address you received from Zipcon.
   and click Add.
8) Under the DNS tab, choose "Enable DNS".  If anything is listed
   in "DNS Server search order" click on it and click Remove.
   Type in: 209.221.136.4 and click Add, then type
   in: 209.221.136.9 and click Add again.

Thats it, click the OK button and the OK button again.  Your PC should
then want to reboot.  After rebooting, it should be all set up.

  If you have problems or questions, please let me know.  Thanks, Dan

Daniel Pewzner  ------------------The Zip Connection------------
zip@zipcon.net        Need help? try http://www.zipcon.net/help
voice: 206-524-0612
data:  206-576-7500  206-576-7501  206-524-7696 ----------------