|
Known
Issues in 8.8.0.1009 Production Version
|
|
Reference No
|
Description
|
Affected OSes
|
|
2723864
|
RAID volume can become unavailable
when trying to read a bad block
|
Vista, XP
|
|
2688529
|
Window OS does not boot with PC
Card
|
Vista, XP
|
|
2688481
|
Errors seen after volume data
verification on expanded RAID volumes
|
Vista, XP
|
|
2688478
|
Incorrect un-initialization status
after migrating RAID1 to RAID0
|
Vista, XP
|
|
2688477
|
Fail to modify Recovery Volume via
"Volume Modify"
|
Vista, XP
|
|
2688400
|
No illustration & detail
appear in IMSM Basic View while RAID1 is Rebuilding
|
Vista, XP
|
|
2688383
|
Port Number and Number of Disks
shows incorrect in Basic Mode View
|
Vista, XP
|
|
2688382
|
No information of RAID0
"Failed" appear in IMSM Basic View
|
Vista, XP
|
|
2549948
|
Creation of a RAID0 volume fails when disk used for creation is a
spanned or dynamic disk
|
Vista
|
|
2519035
|
D-state cycling single disk during initialization 3 drive RAID5
causes volume to fail after pulling power to a single drive
|
Vista
|
|
2518139
|
User Interface Basic mode displays unknown port when 2 disks
have smart errors
|
Windows XP
|
|
2332390
|
JPN: inconsistent font style and font size in Create Recovery
Volume dialog
|
Vista, Windows XP
|
|
106842
|
'Volume Creation Completed' message covered by Intel Matrix
Storage Manager User Interface
|
Windows XP
|
|
2076615
|
Splash screen displays for extended period of time at boot
|
Windows XP
|
|
2330169
|
CHS: Next button corrupted on Welcome screen of Create Recovery
Volume Wizard, Convert Recovery Volume to RAID 1 Wizard, and Modify Recovery
Volume Wizard.
|
Vista
|
|
2552285
|
Unable to create RAID volume when sufficient drives are present
after hot-remove/reinsert
|
Windows XP-64
|
|
2553015
|
When initiating RAID1 rebuild will get message “Wizard unable to
start rebuild process” but rebuild happens
|
Windows XP
|
|
2330162
|
User Interface Progress dialog: progress bar missing, bitmap
corrupted or missing, or cut text
|
Vista
|
|
2553091
|
Check for Correct Recovery Volume, selecting BACK during
creation causes recovery drive to change
|
Vista-64
|
|
2554032
|
Partition disappeared but the ‘disk’ did not in Vista failing RAID 10 testing
|
Vista
|
|
2554217
|
IOMeter* sequential writes on 6-disk R5 slow
|
All OS’s
|
|
2554610
|
IAAMonitor App not responding
while shutdown after Safe Mode installation
|
Windows XP
|
|
2554680
|
File write performance degraded with Gen II drives and Cache On
|
Vista, Windows XP
|
|
2553965
|
Unable to load driver using f6 during system repair or system
restore process under Vista
|
Vista, Vista-64
|
|
77332
|
Failure to enumerate disk causes crash in Intel Matrix Storage
Manager
|
Windows XP
|
|
2553384
|
SATA ODD never gets spin down request or D1 power event
|
Vista
|
|
2554879
|
Driver property page port location information is incorrect on
Cantiga
|
Windows XP
|
|
2555515
|
system lock due to low memory - with DVD playing and IO
|
Windows 2003
|
|
2556588
|
Intel Rapid Recover Technology: Degraded/Normal/Master Offline
goes Normal
on failed volume
|
Vista
|
|
2556593
|
Intel Rapid Recover Technology: Degraded/Syncing state, recovery
disk failure/remove does not match state table
|
Vista
|
|
2556715
|
Intel Rapid Recover Technology: Sync does not re-start with
invalid partner in manual sync mode
|
Vista-64
|
|
2556718
|
Intel Rapid Recover Technology: Basic Mode - Extra port number
shown on the right side of the Volume Picture
|
Vista, Vista-64, Windows XP
|
|
2556799
|
Intel Rapid Recover Technology: Fast sync log is corrupt if no
data is written to new volume
|
Vista-64
|
|
2556876
|
System takes 1-2 minutes to fully enter into hibernation when
disk write back cache is disabled
Workaround: Enable disk write back cache
|
Vista
|
|
2557059
|
The system fails to resume from hibernation when disk write back
cache is disabled
Workaround: Enable disk write back cache
|
Vista
|
|
2662527
|
CSMI_SAS_RAID_SET_STATUS has invalid value
|
Windows XP
|
|
2662528
|
CSMI_SAS_RAID_DRIVES has invalid value On a two drive RAID
system DriveCount
|
Windows XP
|
|
2554851
|
Default blinking behavior for Activate port LED is ‘slow
blinking’ instead of "On"
(non-blinking), the expected behavior
|
Vista
|
|
2556732
|
DC Mode – “ Enable continuous mode” button label does not change in basic mode
once the recovery volume level is changed from 'request' to 'continuous',
|
Windows XP
|
|
2556766
|
Modification of one volume fails during migration of a different
volume
|
Vista,Vista-64,Windows
2003,Windows XP,Windows XP-64
|
|
2556767
|
Creating a volume from an existing disk during migration of
another volume returns an error message that the existing the wizard need to
close before opening a new wizard
|
Vista,Vista-64,Windows
2003,Windows XP,Windows XP-64
|
|
2556995
|
UI_HEB_ARA: Unlock Hard Drive messages need to be RTL-enabled
|
Vista
|
|
2557173
|
ATA command SET MAX ADDRESS EXT does not work properly on
Vista64
|
Vista-64
|
|
2662461
|
Action unavailable to “Delete volume” or “Reset HDD to Non RAID”
in Intel® Matrix Storage Manager console, when you try to delete a
unsupported recovery volume or reset the member disk of the recovery volume
under Intel® Matrix Storage Manager console on ICH9R
Workaround: To delete recovery volume or reset disk to non RAID, go to
OROM UI
|
Windows XP-64
|
|
2662524
|
0xD5 BSOD with Driver Verifier While Hot Plugging from one drive
to another on same port
|
Vista-64
|
|
2662475
|
A Dirty Shutdown of a Recovery volume while in DC mode will
cause the volume to fail instead of causing the fast-synch log to be
invalidated
|
Windows XP
|
|
2556947
|
0x7B BSOD after install driver in AHCI mode when drive with
metadata in the system
|
Vista-64
|
|
2662540
|
RAID volume rebuilding happens on different volume than it is
suggested by UI Wizard when two degraded volumes are available on the system
|
Windows XP
|
|
2662542
|
Driver stops enumerating hotplug
events while hot plugging an ATAPI device
|
Vista-64
|
|
2662548
|
Text misaligned in Modify Volume Wizard 3rd screen
|
Vista
|
|
2662561
|
Intel matrix storage manager stall I/O to a disk connected with
bad SATA cable and does not restart
|
Vista
|
|
2662601
|
SATA port disappears in UI when hot swap of CD drive with hard
drive.
|
Vista-64
|
|
2662520
|
Intel Rapid Recover Technology: UI wizard allows user to select
non-OS drive as a master drive when there are only 2 drives
|
Vista
|
|
2662523
|
Creation of raid volume failed when another drive [which is not
involved in setup] is pulled out. Issue does not occur with scenario
"create from existing"
|
Vista
|
|
2662501
|
UI_HEB_ARA: Bitmap image appears in title of Create Recovery
Volume Wizard screens
|
Vista
|
|
2687790
|
Device Initiated Power
Management (DIPM) is not working for SATA ODDs
|
Vista
|
|
2662633
|
Driver misses hot-unplug events with Link Power Management
disabled in registry
|
Vista-64
|
|
2687769
|
UI-ARA-HEB-ELL-RUS-8.5.0.9154-MUI RCR: Port names are corrupted
in the Basic Mode after creating RAID 1 volume
|
Windows XP
|
|
2330162
|
UI Progress dialog: progress bar missing, bitmap corrupted or
missing, or cut text.
|
Vista
|
|
2330169
|
CHS: Next button corrupted on Welcome screen of Create Recovery
Volume Wizard, Convert Recovery Volume to RAID 1 Wizard, Convert RAID 1 to
Recovery Volume Wizard, and Modify Recovery Volume Wizard.
|
Vista
|
|
2332390
|
JPN: inconsistent font style and font size in Create Recovery
Volume dialog
|
Vista
|
|
2556995
|
UI_HEB_ARA: Unlock Hard Drive messages need to be RTL-enabled
|
Vista
|
|
2687830
|
UI(ELL/HUN): Cut text in dialogs with " - Encrypted"
string
|
Vista
|
|
2687840
|
OROM disk status shown as "Smart Event" for a two
drive Raid0 volume after dirty shutdown while UI still displays as
“Normal"
|
Vista
|
|
2687888
|
Hot plug of drive during DVD playback causes the movie to
hang/halt
|
Windows XP
|
|
2687894
|
UI-HUN-1019-The first option-" Enable Continuous
Update"- on the right click menu of recovery Volume has corrupted
characters.
|
Windows XP
|
|
2687971
|
UI-CHT-Incorrect Translations on Error message when migrate a
volume with encrypted hard drive
|
Vista
|
|
2687995
|
When a missed locked member disk of a degraded RAID 1 volume is
plugged back and unlocked in the BIOS,
the locked member disk of the RAID 1
volume shows a status of "failed" in the IMSM UI or "Error
Occurred" status at the OROM UI
|
Windows XP
|
|
2688016
|
Reads to a pass-thru drive hang during migration of 3 drive RAID 0 volume to 4 drive RAID 0 volume and
intermittent BSOD happens upon deleting the volume after hang when the Intel
matrix storage manager console is open
|
Vista
|
|
2688060
|
Expansion of volume failed from four disk RAID5 to five disk
RAID5
|
Vista-64
|
|
2688076
|
After enabling recovery drive in OROM and rebooting to OS upon
master drive failure, Intel Matrix Storage Console failed to display the
“Switch to Advance Mode View” button and partially displayed the Basic Mode
GUI.
Workaround: Go to “View->Advance Mode” to see the drives and
parameters
|
Windows XP
|
|
2688092
|
Disk Manager Does Not Show RAID Volume After Unlocking Passwords
on Member Disk(s) in the Intel Matrix Storage Manager console
|
Vista
|
|
2687937
|
ODD icon does not update when unplugging the ODD
|
Windows XP
|
|
2688155
|
Hot
plug/unplug of eSATA device during DVD playback causes the movie to hang up
for a moment
|
Vista
|
|
2688481
|
Errors seen
after volume data verification on expanded RAID volumes
|
Windows XP, Vista
|
|
2688467
|
Playing
DVD with some SATA ODD’s causes the DVD to freeze
intermittently
|
Windows
XP, Vista
|
|
2688400
|
No
illustration & detail appear in IMSM Basic View while RAID1 is Rebuilding
|
Vista
|