NOTE:
This Q&A is relevant only for the Futura II cards that are DSP (digital signal processor) capable. These seven-inch cards are identified as those having a two row parallel connector just above the NuBus connector on the board where the optional DSP board attaches. These boards also do NOT have a rotary switch for display configuration on the card itself. Information on the non-DSP capable Futura II family is in another article.
For detailed instructions faxed to you on how to identify your E-Machines graphic card, request document #1248.
Q: What software do I need to make use of the DSP daughtercard on my Futura II DSP card?
A: You may use the SuperMac IPA/GX Controls 3.0 software, with one catch: you will not be able to use the GX Controls plug-in. Install the Image Accel 3.0 plug-in in your Photoshop Plug-ins folder and the Image Processing Mgr 1.2 control panel in the Control Panels folder within your System folder. If you are using Photoshop 2.5 or 2.5.1, you can also use the IPA Motion Blur 2.5.6 plug-in. Be sure to trash your Photoshop Prefs file after installing any of this software. This software can be downloaded from the Radius Software libraries on America Online (keyword: Radius), eWorld (shortcut: Radius), CompuServe (Go: MACBVEN), AppleLink (Third Parties P-Z), the internet (www.radius.com or ftp.radiusvintage.com), and the Radius Online BBS at (408) 541-6190.
Q: Is my display card compatible with System 7.5 and later?
A: Extensive testing has not been done with E-Machines cards system 7.5 or later. Therefore, final compatibility results are not available. System 7.5 and later will likely remain unsupported.It is very likely, however, that the hardware itself will be fine under System 7.5 and later; the E-Machines software, on the other hand, will not be. In particular, the E-Machines control panel is known to be incompatible with System 7.5 and later.
Q: Where do I get software updates for my E-Machines card?
A: The latest versions of all E-Machines software are available in the Radius Software libraries on America Online (keyword: Radius), eWorld (shortcut: Radius), CompuServe (Go: MACBVEN), AppleLink (Third Parties P-Z), and the Radius Online BBS at (408) 541-6190.
Q: How do I check my ROM Version for my display card?
A: To check the ROM version, the card must be first be installed into a Macintosh CPU that has at least one NuBus slot. Next, the E-Machines Diagnostics program must be used to determine the ROM version. The Diagnostics program is located on the E-Machines Accessories disk that came with your product. It is also available for download as part of the E-Machines 3.5.5 archive in the Radius Software libraries on America Online (keyword: Radius), eWorld (shortcut: Radius), CompuServe (Go: MACBVEN), AppleLink (Third Parties P-Z), and the Radius Online BBS at (408) 541-6190.
Q: Does my card support Apple's switch on the fly operation?
A: The E-Machines display cards do not support switch-on-the-fly resolution changing.
Q: I Installed the Futura II into a new Power Macintosh and I am getting a scrambled display. Is my Futura II card Power Macintosh compatible?
A: The Futura II is Power Macintosh compatible with ROM version 1.1 or later, and E-Machines software 3.5.6. Because these Futura II cards have a re-programmable FLASH ROM , a software updater entitled, "Futura II Update for Power Macintosh" is available on many on-line services to update the Futura II display card. The E-Machines 3.5.6 software upgrade is also included. Please note that the Power Macintosh 6100 (or any PDS-based Power Macintosh thereafter) require a seven-inch board, such as the Futura, and Apple's NuBus Adapter card, available from Apple resellers.
The Futura II Update for Power Macintosh is available in the Radius Software libraries on America Online (keyword: Radius), eWorld (shortcut: Radius), CompuServe (Go: MACBVEN), AppleLink (Third Parties P-Z), and the Radius Online BBS at (408) 541-6190.
Q: I installed my Futura II card into a Power Macintosh and received a "Bad F-Line" error upon startup. If I remove the E-Machines software, everything works fine. What's wrong?
A: E-Machines software version 3.5.6 is required for Power Macintosh systems. This version of the E-Machines software is included in the "Futura II Update for Power Macintosh" software archive. You may obtain the "Futura II Update for Power Macintosh" software from the Radius Software libraries on America Online (keyword: Radius), eWorld (shortcut: Radius), CompuServe (Go: MACBVEN), AppleLink (Third Parties P-Z), and the Radius Online BBS at (408) 541-6190.
Q: I have more than one display on my Power Macintosh and my system occasionally crashes, what could be wrong?
A: If a monitor that is NOT being driven by an E-Machines card is the primary display containing the menu bar, then you must disable the "E-Machines Menu Available On Menu Bar" option in the E-Machine control panel's Menu Options section. This feature is only available for E-Machines cards driving primary monitors and will otherwise cause problems.
Q: Why can't I change resolutions on my multi-resolution monitor? Each time I select a different switch setting, there is no change of the display.
A: (same as above) Without the proper E-Machines cable, the switch on the E-Machines display card will not be functional. To order the cable, dial 1-800-977-7060 and request part number 0008773-0001.
Q: In the manual, it indicates I need to adjust a rotary switch to obtain different resolutions, but I can't find any switch. How do I change resolution?
A: On the Futura II/DSP family cards, there is no configuration switch. It is better to restart your Macintosh while holding down the 'E' key. This will trigger the card's "round robin" auto-configuration mode. During the startup process, the screen will begin to cycle through different timing modes and resolutions. When a clear image appears with your desired screen resolution, release the 'E' key immediately. Your Macintosh will restart and the image should now be proper.
Q: I'm not getting a proper image on my display. How do I configure the card to make it work with my monitor?
A: Restart your Macintosh while holding down the 'E' key. This will trigger the card's "round robin" auto-configuration mode. During the startup process, the screen will begin to cycle through different timing modes and resolutions. When a clear image appears with your desired screen resolution, release the 'E' key immediately. Your Macintosh will again restart and the image should now be proper.
Q: Can I attach a Spectrum Power DSP upgrade AND an Ethernet daughtercard to my Futura II card at the same time?
A: No, the Spectrum Power DSP upgrade and the Ethernet daughtercard may not be used at the same time. You may use one or the other.
Comments to support@radius.com