Subject: MWave and MSMail remote client
	Replacement for document TP755E03.DOC dated previous to 03/13/95 2:19 PM

This MSMail fix is for users of the 755CE, 755CsE or 755CD with the DSP modem. 
It WILL NOT work if applied to other systems and users may experience problems 
with MicroSoft MSMail Remote. Following is a short study into apparent 
incompatibilities between MicroSoft Mail Windows Remote Client v3.x and the 
DSP MWave modem as shipped in the IBM ThinkPad 7xx (755CE, 755CsE, 755CD) 
series.

When a user attempts to use MicroSoft Mail Windows Remote Client v3.x on an 
IBM ThinkPad with the MWave modem installed, the installation will complete 
normally. When the user attempts to connect to the postoffice to send/receive 
mail, the software will appear to hang with the message "Initializing modem".

Apply the following fix to eliminate the problem: Obtain the MSMMWAVE.EXE file 
from the IBM BBS (1-919-517-0001).

1. Execute the MSMMWAVE.EXE file and follow the instructions displayed on the 
terminal.  This will create the following files:
 
 MWAVE.SCR      Compiled MSMail modem file
 MWAVE.MDM      Source file for the compiled MDM file.  If necessary your 
		system administrator can modify this file and recompile for 
		you
 TP755E03.TXT   Text version of this document
 README.TXT     Important information customers should be aware of.
 
2. Copy the MWAVE.SCR file to c:\windows\msmail\msrmt\glb.  
 
 This script file contains the standard modem setup strings used by the 
 External, Transmit and Listen programs. There are five procedures defined 
 in this script file for setting up the modem and for connecting to a remote 
 External machine.
 
The modem setup strings used here will be adequate for most people but there 
may be some changes required if you are dialing overseas and require a longer 
wait for Carrier Detect (S7 register) or if you wish to change the speaker 
volume.  Note that if you used the -Innn option  in version 1.0 or 2.0 that 
you will have to modify the S7 register and recompile this script file.
 
The MWAVE.MDM file is the text version of the script file and is included for 
your Mail Administrator who will have the necessary script complier required 
to create a usable MWAVE.SCR file if chages are necessary.  For more 
information regarding modem options consult your modem manual.
 
3. Edit the MSMAIL.INI file, located in the Windows subdirectory, and add the 
following line under the [sfsremote] section.: 

 NOTE: the “0” is a zero.
 
 EXCLUSIVE=0
 
NOTE: To establish communications with two modems, both modems must have the 
appropriate modem script installed.  If the customer does not have a script 
he should check the MicroSoft MSWGA forum on CompuServ, library number 3.

NOTE: If the user starts heavy system usage applications such as PageMaker or 
CorelDraw during a communication session he may experience loss of carrier.  
This is no different than any other communication application.  At the worst 
there is potential of corrupting the file resulting in data loss.


ThinkPad 755 CE, CsE, CD
and all MWAVE modems
Update for Microsoft MSMail Remote


Modem Problem Solving Strategy - John Terdik
03/13/95 2:21 PM                
TP755E03.DOC