IBM ThinkPad                                            December 20, 1996
MPEG Features Diskette for Windows 95 Version 1.12
==================================================

What This Diskette Does
-----------------------

The accompanying MPEG Features Diskette can enable or update MPEG
function in the ThinkPad system.

Only the ThinkPad 760ED is supported.

To determine whether you have to update the program,
refer to "Summary of Changed and Fixed Items."

To update the program, refer to "Installation Guide."


Released Version
----------------

Version 1.00     New model support
Version 1.10     A fix for some problems
Version 1.11     A fix for some problems
Version 1.12     A fix for some problems


Summary of Change
-----------------
  Key: <n.nn>  Diskette version (for example, 1.00 means Version 1.00)
        (New)  New function or enhancement
        (Fix)  Correction to existing function

<1.00>
 - (New) Support for ThinkPad 760ED.

<1.10>
  - (Fix) The power saving function is updated.
  - (Fix) The out-of-lip-sync problem for the PAL clip with irregular
          resolution size is fixed.
  - (Fix) MPEG video no longer halts during chapter seek.
  - (Fix) The flashing noise is eliminated in specific MPEG file play.
  - (Fix) The Thermal problem is fixed.

<1.11>
  - (Fix) System hang in MPEG play when docked into PCI Docking station

<1.12>
  - (Fix) MPEG video of a small file size cannot be played repeatedly.


Installation Guide
------------------

Note:
    - Use this driver diskette only for the ThinkPad 760ED.
    - Before installing, make sure that you have installed
      the following software in the computer:
         - Video Features Diskette for Windows 95 (Version 1.10 or above)
         - Mwave DSP Features Diskette for Windows 95
         - Video Capture Driver II for Windows 95 (Version 1.11 or above)

   1. Start Windows 95.

   2. Open My Computer.

   3. Go to Control Panel, and then go to Add New Hardware.

   4. Click on Next. When asked "Search for your new hardware?,"
      select No.

   5. Click on Next and select Sound, video and game controller.

   6. Click on Next.

   7. Insert the MPEG Features Diskette for Windows 95 into the
      diskette drive.  Click on Have Disk....

   8. Select IBM MPEG CD-i/VideoCD (mci) and click on OK.

   9. Click on OK, and click on Finish.

  10. When Windows 95 prompts you to restart the computer, click on No.
      Repeat step 3 to 10 to install IBM MPEG Files/ISO9660 (mci).
      On step 8, however, select IBM MPEG Files/ISO9660 (mci).

  11. When Windows 95 prompts you to restart the computer, click on No.
      Repeat step 3 to 10 to install IBM MPEG PCI Bridge.
      On step 8, however, select IBM MPEG PCI Bridge.

  12. If this is the first time to install IBM MPEG PCI Bridge,
      you must do the following one-time operation.
      Select the following in sequence.

      Control Panel -> System -> Device Manager -> Other Devices
      ->PCI Multimedia Device.

      Select Remove and OK (This procedure removes
      the device from the unknown class and adds it to sound,
      video, and game controllers).

  13. Shut down the system and reboot.


Trademarks
----------
IBM and ThinkPad are trademarks of IBM Corporation.
Windows is a trademark of Microsoft Corporation.