XDVIK

NAME

SYNOPSIS

DESCRIPTION

This program has the capability of showing the file shrunken by various (integer) factors, and also has a ``magnifying glass'' which allows one to see a small part of the unshrunk image momentarily.

Before displaying any page or part thereof, it checks to see if the dvi file has changed since the last time it was displayed. If this is the case, then xdvi will reinitialize itself for the new dvi file. For this reason, exposing parts of the xdvi window while TeX is running should be avoided. This feature allows you to preview many versions of the same file while running xdvi only once. #ifbuttons

In addition to using keystrokes to move within the file, xdvi provides buttons on the right side of the window, which are synonymous with various sequences of keystrokes. #endif #ifps

xdvi can show PostScript<tm> specials by any of three methods. It will try first to use Display PostScript<tm>, then NeWS, then it will try to use Ghostscript to render the images. All of these options depend on additional software to work properly; moreover, some of them may not be compiled into this copy of xdvi.

For performance reasons, xdvi does not render PostScript specials in the magnifying glass. Furthermore, it does not yet support `!' or `header=' specials. #endif If dvi_file is not specified, a file-selection widget is popped up for you to choose the dvi file from.  

OPTIONS

+page

Specifies the first page to show. If + is given without a number, the last page is assumed; the first page is the default.

-altfont font

(.altFont) Declares a default font to use when the font in the dvi file cannot be found. This is useful, for example, with PostScript <tm> fonts.

-background color

(.background) Determines the color of the background. Same as -bg.

-bd color

(.borderColor) Determines the color of the window border.

-bg color

(.background) Determines the color of the background.

-bordercolor color

Same as -bd.

-borderwidth width

(.borderWidth) Specifies the width of the border of the window. Same as -bw.

-bw width

(.borderWidth) Specifies the width of the border of the window.

-copy

(.copy) Always use the copy operation when writing characters to the display. This option may be necessary for correct operation on a color display, but overstrike characters will be incorrect. #ifgrey If greyscale anti-aliasing is in use, the -copy operation will disable the use of colorplanes and make overstrikes come out incorrectly. #endif See also -thorough.

-cr color

(.cursorColor) Determines the color of the cursor. The default is the color of the page border.

+maketexpk

(.maketexpk) Invoke MakeTeXPK to create missing fonts, regardless of the compile-time default. -maketexpk says not to invoke MakeTeXPK.

-mfmodestring

(%%dot%%mfmode) Use string for the Metafont mode passed to MakeTeXPK. If this is not set, the `mfmode' resource is used. if that is not set, the mode is left unspecified, which causes MakeTeXPK to guess from the resolution.

-d debugnum

(.debugLevel) If nonzero, prints additional information on standard output. The number is taken as a set of independent bits. The meaning of each bit follows. 1=bitmaps; 2=dvi translation; 4=pk reading; 8=batch operation; 16=events; 32=file opening; 64=PostScript communication; 128=Kpathsea stat(2) calls; 256=Kpathsea hash table lookups; 512=Kpathsea path definitions; 1024=Kpathsea path expansion; 2048=Kpathsea searches. To trace everything having to do with file searching and opening, use 4000.

-density density

(.densityPercent) Determines the density used when shrinking bitmaps for fonts. A higher value produces a lighter font. The default value is 40. Same as -S.

-display host:display

Specifies the host and screen to be used for displaying the dvi file. By default this is obtained from the environment variable DISPLAY. #ifbuttons

-expert

(.expert) Prevent the buttons from appearing. See also the `x' keystroke. #endif

-fg color

(.foreground) Determines the color of the text (foreground).

-foreground color

Same as -fg. #ifgrey

-gamma gamma

(.gamma) Controls the interpolation of colors in the greyscale anti-aliasing color palette. Default value is 1.0. For 0 < gamma < 1, the fonts will be lighter (more like the background), and for gamma > 1, the fonts will be darker (more like the foreground). Negative values behave the same way, but use a slightly different algorithm. #endif

-geometry geometry

(*geometry) Specifies the initial geometry of the window.

-hl color

(.highlight) Determines the color of the page border. The default is the foreground color.

-hush

(.Hush) Causes xdvi to suppress all suppressable warnings.

-hushchars

(.hushLostChars) Causes xdvi to suppress warnings about references to characters which are not defined in the font.

-hushchecksums

(.hushChecksums) Causes xdvi to suppress warnings about checksum mismatches between the dvi file and the font file.

-hushspecials

(.hushSpecials) Causes xdvi to suppress warnings about \special strings that it cannot process.

-icongeometry geometry

(.iconGeometry) Specifies the initial position for the icon.

-iconic

(.iconic) Causes the xdvi window to start in the iconic state. The default is to start with the window open.

-keep

(.keepPosition) Sets a flag to indicate that xdvi should not move to the home position when moving to a new page. See also the `k' keystroke.

-l

(.listFonts) Causes the names of the fonts used to be listed.

-margins dimen

(.Margin) Specifies the size of both the top margin and side margin. This should be a decimal number optionally followed by ``cm'', e.g., 1.5 or 3cm, giving a measurement in inches or centimeters. It determines the ``home'' position of the page within the window as follows. If the entire page fits in the window, then the margin settings are ignored. If, even after removing the margins from the left, right, top, and bottom, the page still cannot fit in the window, then the page is put in the window such that the top and left margins are hidden, and presumably the upper left-hand corner of the text on the page will be in the upper left-hand corner of the window. Otherwise, the text is centered in the window. See also -sidemargin, -topmargin, and the keystroke `M.'

-mgs size

Same as -mgs1.

-mgs[n] size

(.magnifierSize[n]) Specifies the size of the window to be used for the ``magnifying glass'' for Button n. The size may be given as an integer (indicating that the magnifying glass is to be square), or it may be given in the form widthxheight. See the MOUSE ACTIONS section. Defaults are 200x150, 400x250, 700x500, 1000x800, and 1200x1200. #ifdps

-nodps

(.nodps) Inhibits the use of Display PostScript<tm> for displaying PostScript<tm> specials. Other forms of PostScript emulation, if installed, will be used instead. #endif #ifghost

-noghostscript

(.noghostscript) Inhibits the use of GhostScript for displaying PostScript<tm> specials. #endif #ifgrey

-nogrey

(.grey) Turns off the use of greyscale anti-aliasing when printing shrunken bitmaps. (In this case, the logic of the corresponding resource is the reverse: -nogrey corresponds to grey:off; +nogrey to grey:on.) See also the `G' keystroke. #endif #ifnews

-nonews

(.nonews) Inhibits the use of NeWS<tm> for displaying PostScript<tm> specials. Ghostscript, if enabled by the installation, will be used instead. #endif #ifps

-nopostscript

(.nopostscript) Turns off rendering of PostScript<tm> specials. Bounding boxes, if known, will be displayed instead. This option can also be toggled with the `v' keystroke. #endif

-offsets dimen

(.Offset) Specifies the size of both the horizontal and vertical offsets of the output on the page. This should be a decimal number optionally followed by ``cm'', e.g., 1.5 or 3cm, giving a measurement in inches or centimeters. By decree of the Stanford TeX Project, the default TeX page origin is always 1 inch over and down from the top-left page corner, even when non-American paper sizes are used. Therefore, the default offsets are 1.0 inch. See also -xoffset and -yoffset.

-p pixels

(.pixelsPerInch) Defines the size of the fonts to use, in pixels per inch. The default value is %%bdpi%%.

-paper papertype

(.paper) Specifies the size of the printed page. This may be of the form widthxheight (or widthxheightcm), where width is the width in inches (or cm) and height is the height in inches (or cm), respectively. There are also synonyms which may be used: us (8.5x11), usr (11x8.5), legal (8.5x14), foolscap (13.5x17), as well as the ISO sizes a1-a7, b1-b7, c1-c7, a1r-a7r (a1-a7 rotated), etc. The default size is %%defaultpagesize%%.

-rv

(.reverseVideo) Causes the page to be displayed with white characters on a black background, instead of vice versa.

-s shrink

(.shrinkFactor) Defines the initial shrink factor. The default value is 3.

-S density

(.densityPercent) Determines the density used when shrinking bitmaps for fonts. A higher value produces a lighter font. The default value is 40. Same as -density.

-sidemargin dimen

(.sideMargin) Specifies the side margin (see -margins).

-thorough

(.thorough) xdvi will usually try to ensure that overstrike characters (e.g., \notin) are printed correctly. On monochrome displays, this is always possible with one logical operation, either and or or. On color displays, however, this may take two operations, one to set the appropriate bits and one to clear other bits. If this is the case, then by default xdvi will instead use the copy operation, which does not handle overstriking correctly. The -thorough option chooses the slower but more correct choice. See also -copy.

-topmargin dimen

(.topMargin) Specifies the top and bottom margins (see -margins).

-version

Print information on the version of xdvi.

-xoffset dimen

(.xOffset) Specifies the size of the horizontal offset of the output on the page. See -offsets.

-yoffset dimen

(.yOffset) Specifies the size of the vertical offset of the output on the page. See -offsets.

KEYSTROKES

q

Quits the program. Control-C and control-D will do this, too.

n

Moves to the next page (or to the nth next page if a number is given). Synonyms are `f', Space, Return, and Line Feed.

p

Moves to the previous page (or back n pages). Synonyms are `b', control-H, and Delete.

g

Moves to the page with the given number. Initially, the first page is assumed to be page number 1, but this can be changed with the `P' keystroke, below. If no page number is given, then it goes to the last page.

P

``This is page number n.'' This can be used to make the `g' keystroke refer to actual page numbers instead of absolute page numbers.

Control-L

Redisplays the current page.

^

Move to the ``home'' position of the page. This is normally the upper left-hand corner of the page, depending on the margins as described in the -margins option, above.

u

Moves up two thirds of a window-full.

d

Moves down two thirds of a window-full.

l

Moves left two thirds of a window-full.

r

Moves right two thirds of a window-full.

c

Moves the page so that the point currently beneath the cursor is moved to the middle of the window. It also (gasp!) warps the cursor to the same place.

M

Sets the margins so that the point currently under the cursor is the upper left-hand corner of the text in the page. Note that this command itself does not move the image at all. For details on how the margins are used, see the -margins option.

s

Changes the shrink factor to the given number. If no number is given, the smallest factor that makes the entire page fit in the window will be used. (Margins are ignored in this computation.)

S

Sets the density factor to be used when shrinking bitmaps. This should be a number between 0 and 100; higher numbers produce lighter characters.

R

Forces the dvi file to be reread. This allows you to preview many versions of the same file while running xdvi only once.

k

Normally when xdvi switches pages, it moves to the home position as well. The `k' keystroke toggles a `keep-position' flag which, when set, will keep the same position when moving between pages. Also `0k' and `1k' clear and set this flag, respectively. See also the -keep option. #ifbuttons

x

Toggles expert mode (in which the buttons do not appear). Also `0x' and `1x' clear and reset this mode, respectively. See also the -expert option. #endif #ifgrey

G

This key toggles the use of greyscale anti-aliasing for displaying shrunken bitmaps. In addition, the key sequences `0G' and `1G' clear and set this flag, respectively. See also the -nogrey option.

If given a numeric arg that is not 0 or 1, greyscale anti-aliasing is turned on, and the gamma resource is set to the value divided by 100. E.g., `150G' turns on greyscale and sets gamma to 1.5. #endif #ifps

v

This key toggles the rendering of PostScript<tm> specials. If rendering is turned off, then bounding boxes are displayed when available. In addition the key sequences `0v' and `1v' clear and set this flag, respectively. See also the -nopostscript option. #endif

F

Read a new DVI file (if the SELFILE file selection widget was not disabled at compile-time).

MOUSE ACTIONS

Also, the scrollbars (if present) behave in the standard way: pushing Button 2 in a scrollbar moves the top or left edge of the scrollbar to that point and optionally drags it; pushing Button 1 moves the image up or right by an amount equal to the distance from the button press to the upper left-hand corner of the window; pushing Button 3 moves the image down or left by the same amount.  

ENVIRONMENT

The environment variable XDVIFONTS determines the path(s) searched for fonts in the following manner. The string consists of one or more strings separated by colons. In each such string, the substring %f is changed to the font name; %d is changed to the magnification; and %p is changed to the font file format (``pk'' or ``gf''). If no %f appears in the string, then the string ``/%f.%d%p'' is added on the end. For example, if the string is ``/usr/local/tex/fonts'' and the font is cmr10 at 300 dots per inch, then it searches for /usr/local/tex/fonts/cmr10.300pk and /usr/local/tex/fonts/cmr10.300gf, in that order. An extra colon anywhere in XDVIFONTS causes the system default paths to be tried at that point. If the font is not found in the desired size, then xdvi will #ifmakepk invoke Metafont to create the font in the correct size. Failing that, it will #endif try to find the nearest size. If the font cannot be found at all, then xdvi will try to vary the point size of the font (within a certain range), and if this fails, then it will use the font specified as the alternate font (cf. -altfont).

In addition, a %F specifier is available; it is a synonym for %f, but it does not inhibit putting the string ``/%f.%d%p'' at the end. Finally, a %b specifier is available; it is converted to the current resolution being used (i.e., the value of the -p parameter or the .pixelsperinch resource. #iftexfonts

For compatibility with TeX, you may also use TEXFONTS in place of XDVIFONTS, although in that case the variable should not include any ``%'' specifiers. The reason for recognizing TEXFONTS is that certain versions of TeX also support the convention regarding an extra colon in the font path; therefore, users who create their own fonts can put both their .tfm and raster files in the same directory and do ``setenv TEXFONTS :MFdir'' or ``setenv TEXFONTS MFdir:'' in order to get both TeX and xdvi to search their directory in addition to the system standard directories. The XDVIFONTS variable overrides the TEXFONTS variable, so that on those sites where TEXFONTS must be set explicitly, and therefore this feature is not useful, the XDVIFONTS variable may be set to an empty string (i.e., ``setenv XDVIFONTS'') to cause xdvi to ignore TEXFONTS.

xdvi also recognizes the PKFONTS and TEXPKS variables, which are checked after XDVIFONTS but before TEXFONTS. #endif #ifsubdir

You can also enable recursive searching in the font path by using the ``*'' and ``**'' specifiers. At this point in the path, xdvi will recursively search subdirectories of the given directory in order to find font files. A single asterisk limits the search to one level; a double asterisk will search through an arbitrary number of levels. Also, the variable TEXFONTS_SUBDIR can be used to give a colon-separated list of directories to recursively search. This is equivalent to including the specifiers with a ``*'' after each; the usual conventions regarding extra colons applies here, too, relative to a default subdirectory path. Asterisks may not be preceded by a ``%'' specifier in any path component. #endif

The XDVISIZES environment variable may consist of a list of resolutions separated by colons, expressed in integer dots per inch. If a font cannot be found or made at its stated size, these sizes are tried as a fallback. See the Kpathsea manual for more details. xdvi will also try the actual size of the font before trying any of the given sizes.

Virtual fonts are also supported, although xdvi does not have any built-in fonts to which they can refer. The search path for .vf files can be specified with the environment variable XDVIVFS in a similar manner to that for the XDVIFONTS variable. #iftexfonts xdvi will also check the VFFONTS variable if the XDVIFONTS variable is not set. #endif Virtual fonts are searched for immediately after looking for the font as a normal font in the exact size specified.  

FILES

%%DEFAULT_FONT_PATH%% Font pixel files.

%%DEFAULT_VF_PATH%% Virtual font files.

SEE ALSO

AUTHORS

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

KEYSTROKES

MOUSE ACTIONS

ENVIRONMENT

FILES

SEE ALSO

AUTHORS