this is the oscillator part
of the synth
oct 1 = oscillator octave 1
oct 2 =
oscillator octave 2
pmd 1 = phase modulation depth oscillator 1
pmd 2 =
phase modulation depth oscillator 2
note 2 = oscillator 2 note this one
is easy to tune soo try this one first !!!
the tune 1 is the oscillator 1
detuner its a very big detuner
this is the phase modulation part of the synth
oct 1 = phasemodulation octave 1
oct 2 =
phasemodulation octave 2
the tune 1 is also a very big detuner
in the green box you see c and
tune
you can set tune at note and select the note you
want
try this firts !! but if you don`t get a good noise thy the normal
detuner tune1
THERE ARE 2 ADSR AND THERE NOT ONLY USED FOR
THE FILTER BUT ALSO FOR THE VOLUME
(WHY? SAVES A LOT OF CPU!
;)
THE FILTERS ARE
LOW PASS
HI
PASS
BAND PASS
AND 4 POLE (MOOG FILTER WITH HI RESONANCE)
the auto filter
just turn up de knob and in the green box you can select the speed
(now it`s 1/4)
gate will start when you hit a key
free starts at any
point
start=it`s starts when you hit the firts key
the panner
just turn up de knob and in the green box you can
select the speed now it`s 1/4 also ;)
free starts at any point and gate will
start when you hit a key
boost =
extra bass
volume = main volume
trigger = retrigger
this is the sequencer ;) the fun part of the synth
ok the
sequencer is still a beta i`m working on key gate ect..
in the picture you see that it now triggers the oscillators
(osc)
you can also select filter
below sequence you see 16 ping
16
ping = 16 steps ping poing
you can select :
16 ping = 16 ping
poing
16 normal = 16 steps normal
16 back = 16 steps back
but
you can also select:
12 ping/back/normal
8 ping/back/normal
6
ping/back/normal
4 ping/back/normal
3 ping/back/normal
the
sequencer and the trance gate share the same sequencer
soo if you want to use
the trance gate
set the speed of the sequencer on 16 or 32
and the sequence to
16 normal back or ping
Thats all hope you like it
and have fun
OdO